|
SageTV United Kingdom SageTV and SageTV Recorder Users from the UK - This forum is for you to post about specific issues using SageTV software in the UK. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
SageTV v7 DVB Radio
Has anyone got the radio channels working, i've managed to scan and find them but when i click play i just get no signal. I think it maybe to do with the fact that sage cant do interactive stuff.
__________________
Server: Win 10 64bit Core i3 8GB 20TB, TBS6985, TBS6984, Sage 9. Clients: 5 x HD300, 2 x HD200, Placeshifter. |
#2
|
|||
|
|||
Yea, they work fine here (DVB-S currently). I dont have the no siginal screen but just a black one.
Cheers Ben
__________________
Server - Win7 64bit, 2.4Ghz Intel Core 2 Duo, TBS 6284 PCI-E Quad DVB-T2 Tuner, 3 x HD200 & 1 x HD300 extenders |
#3
|
||||
|
||||
I've only tried DVB-T so far will try satellite tonight.
Do you have the frequencies for the sat radio channels would save the hassell of scanning then setting it back up.
__________________
Server: Win 10 64bit Core i3 8GB 20TB, TBS6985, TBS6984, Sage 9. Clients: 5 x HD300, 2 x HD200, Placeshifter. Last edited by jamesdisco; 05-21-2010 at 06:18 AM. |
#4
|
|||
|
|||
I'e attached my .frq file which was created this morning so it should be pretty much upto date, the only downside is that you'll have to sort through it to get the frequencys you want. I did also try DVB-T earlier on in the beta and it worked fine so I would assume it should be ok now as well.
Cheers Ben
__________________
Server - Win7 64bit, 2.4Ghz Intel Core 2 Duo, TBS 6284 PCI-E Quad DVB-T2 Tuner, 3 x HD200 & 1 x HD300 extenders |
#5
|
|||
|
|||
Quote:
I'll try DVB-S soon, but that's not really a solution for me because I'm short of satellite tuners. Last edited by fac13; 05-21-2010 at 10:52 AM. |
#6
|
|||
|
|||
Just installed my DVB-T tuner / scanned and it works fine for me.
Cheers Ben
__________________
Server - Win7 64bit, 2.4Ghz Intel Core 2 Duo, TBS 6284 PCI-E Quad DVB-T2 Tuner, 3 x HD200 & 1 x HD300 extenders |
#7
|
|||
|
|||
Thank you.I discovered my problem was just finger trouble when I edited my frq file. DVB-T radio is working perfectly for me now.
My usual combination of Digiguide, DG2XML and Stéphane's importer gets me all the radio guide data too, so I'm very happy |
#8
|
|||
|
|||
Yeah DVB-T Radio working fine for me.
I do get a "no signal" for 2-3 seconds when I first tune in but then again I get this on DVB-T tv channels as well.
__________________
Darkside: DVB-C x4 DVB-T2 x2 HD-300 x4 Lightside: DVB-C x2 DVB-T2 x4 HD-300 x3 |
#9
|
|||
|
|||
I'm looking to join the party and install v7.
Are any of you using it as the primary viewing system, or are you installed on a test platform? |
#10
|
|||
|
|||
Quote:
The only minor issue is I have a coupls of old MVPs and they need to stay on SageMC because the new interface is very slow, even with animations turned off. The waf is sky high, she likes the new interface and the fact she can now record Smooth FM (don't ask me why!). It's very stable, I say go for it. Edit: forget to say, the webfeedencoder plugin continued working without issues too. Last edited by fac13; 05-22-2010 at 06:54 AM. |
#11
|
||||
|
||||
That's bad news, almost all of the Sage access here is via MVP. Going to be hard to justify without the new UI, I think...
__________________
unRAID Server: Intel Core i5 7600K, 48GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x10TB SATA3 Parity Drive, 3x8TB SATA Array, 1x hdHomeRun DVB-T2 Quattro, IPTV via xTeVe, unRAID 6.8.3, tvHeadEnd for recording back end, Emby Clients: 3 Nvidia Shields, 3 FireTV, 3 Win10 Pro PC Clients |
#12
|
|||
|
|||
Quote:
I'd encourage you to start a thread up in the beta forum to see if anybody has any other tips for speeding things up on the MVP - mainly so I don't have to! Edit: I'll do that myself, I'm in a position to try them out and you probably won't be. Last edited by fac13; 05-22-2010 at 01:51 PM. |
#13
|
||||
|
||||
Is upgrading as simple as just installing the V7 beta? My current V6 system has been so stable that whenever I do any work on it I realise that I have forgotten how I do stuff with setting up Sage as its so many months since I last did any changes or maintenance. Contrast this with my continual tweaking of Windows Media Centre which always had problems but on the bright side I knew inside out as I had to fiddle with it so much:-)
|
#14
|
|||
|
|||
Well yes, it really is that simple. I was a little nervous of the potential waf impact of course, but within minutes it was recording a mission-critical Corrie episode.
You can then load the new UI/STV at each of your extenders/clients, or not, as you wish. You will NOT want the new UI on any MVPs, so stick with the original Sage one or SageMC. I needed to install a later beta of SageMC to get that working properly again (the old one worked, it just kept displaying version-mismatch messages). If you want to add DVB radio channels you can use exactly the same method you usually use to amend your lineup - personally I prefer not rescan using Sage, so I edit my frq files manually and use XMLTV Importer to change the lineup in Sage. My upgraded server has been completely stable since I upgraded on Thursday evening and the family are all delighted with it. Me, I'm relieved! Last edited by fac13; 05-23-2010 at 04:26 AM. |
#15
|
|||
|
|||
Quote:
I will upgrade at some point but I'm not rushing in to it. Will run the HD200 on the latest beta for a bit, check thats stable. Even then I will probably put SageMC onto v7 just for the familiarity factor (I'm upgrading more for the promised speed ups, the metadata inclusion in the video files and getting rid of the pause) So no problems with latest beta SageMC on top of v7 ?
__________________
Tecra M5, 2 x HD200, 2 x HD300 2 x PCTV 290e Win 7, Sage 7.1.9, Phoenix 2 STV Stephane's XMLTV Importer, Digiguide, |
#16
|
|||
|
|||
I don't really dig the new interface much so will probably stay with SageMC, hence:-
http://forums.sagetv.com/forums/showthread.php?t=48509
__________________
2 X HD300, 2 X HD100 & KVM unRAID Host with SageTV Docker using TBS 6285 Quad DVB-T2 & TBS 6984 Quad DVB-S2 Tuners |
#17
|
||||
|
||||
Cheers, I've had no time to install v7 at all yet. I will do it despite almost all my outputs being MVP anyway, I'm too much of a geek to ignore the version upgrade for long...
__________________
unRAID Server: Intel Core i5 7600K, 48GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x10TB SATA3 Parity Drive, 3x8TB SATA Array, 1x hdHomeRun DVB-T2 Quattro, IPTV via xTeVe, unRAID 6.8.3, tvHeadEnd for recording back end, Emby Clients: 3 Nvidia Shields, 3 FireTV, 3 Win10 Pro PC Clients |
#18
|
||||
|
||||
I would run the new UI for a few weeks first. A few of the guys who have been running it for the past month or so thought the same way, but after running it for a while stuck with the new interface.
__________________
unRAID Server: Intel Core i5 7600K, 48GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x10TB SATA3 Parity Drive, 3x8TB SATA Array, 1x hdHomeRun DVB-T2 Quattro, IPTV via xTeVe, unRAID 6.8.3, tvHeadEnd for recording back end, Emby Clients: 3 Nvidia Shields, 3 FireTV, 3 Win10 Pro PC Clients |
#19
|
|||
|
|||
Quote:
Are you using Digiguide data with LM Gestion's XMLTV importer ? Quote:
Cheers
__________________
Server : Asus M4A79XTD Evo / AMD Phenom II X4 955 @ 3.2GHz / 4Gb RAM / Win 10 64-bit / Cinergy 2400iDT (French Freeview - TNT) / 2 * Hauppauge NOVA-HD-S2 (UK Sky) / TT CT-3650 CI / HDD : 4.5 To / Sage V7 / XMLTV Importer / EPG from WebGrabPlus+/ LM DVB Recorder for all tuners / 2 Clients : STP-HD300 |
#20
|
|||
|
|||
Yes I am. I didn't have to do anything to my existing setup to get Digiguide/DG2XML/XMLTV Importer working with V7.
My server specs are in my Public Profile - not bleeding edge but not far off. I don't think that's the problem and other posters have noted the V7 UI MVP performance issue too. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DVB-S Radio Stations (Sound Only Channels) | martini | SageTV Software | 3 | 12-13-2009 03:47 PM |
Freeview DVB-T setup help (NZ DVB-T HDHR + SageTV 6.5.13 on Linux) | akawoz | SageTV Beta Test Software | 9 | 04-20-2009 01:09 PM |
DVB-T Radio Stations | Flatstanly | SageTV Software | 12 | 10-10-2008 11:44 AM |
DVB-T Radio | moamoa | SageTV Beta Test Software | 4 | 12-29-2006 02:01 PM |
SageTV recorded FM radio! | gprichardson1 | SageTV Software | 5 | 12-01-2004 11:14 AM |