|
|
|||||||
| Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
11-04-2009, 10:57 PM
|
||||
|
||||
|
HD PVR USB not recognized ...
I have been getting alot of errors with the HD PVR and USB. If I so much as "touch" the HD PVR, I get an error that says "USB not recognized". This is usually rectified by fiddling with the USB cable, and turning the unit on an off and removing-inserting the USB cable into the HD PVR.
Has anyone else had this problem? A search for "USB not recognzied" here hasn't turned up much Can anyone let me know what may be causing this if you know? Brand new Gigabyte 785 chipset MB with 2 gigs of DDR3 ram. 
|
|
#2
11-05-2009, 07:51 AM
|
||||
|
||||
|
Did you try replacing the USB cable with a known good one? Also verify there is nothing physically wrong with the ports you are plugging into.
Gerry
__________________
Big Gerr _______ Server - WHS 2011: Sage 7.1.9 - 1 x HD Prime and 2 x HDHomeRun - Intel Atom D525 1.6 GHz, Acer Easystore, RAM 4 GB, 4 x 2TB hotswap drives, 1 x 2TB USB ext Clients: 2 x PC Clients, 1 x HD300, 2 x HD-200, 1 x HD-100 DEV Client: Win 7 Ultimate 64 bit - AMD 64 x2 6000+, Gigabyte GA-MA790GP-DS4H MB, RAM 4GB, HD OS:500GB, DATA:1 x 500GB, Pace RGN STB. Last edited by gplasky; 11-05-2009 at 10:26 AM.
|
|
#3
11-05-2009, 09:27 AM
|
|||
|
|||
|
I agree with Gerry's thoughts. This clearly isn't normal. It is either a bad cable or a bad connector. If replacing the cable doesn't work, then I would contact Hauppauge to get a replacement.
__________________
i7-6700 server with about 10tb of space currently SageTV v9 (64bit) Ceton InfiniTV ETH 6 cable card tuner (Spectrum cable) OpenDCT HD-300 HD Extenders (hooked to my whole-house A/V system for synched playback on multiple TVs - great during a Superbowl party) Amazon Firestick 4k and Nvidia Shield using the MiniClient Using CQC to control it all
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| HD-PVR: usb device not recognized | tvmaster2 | Hardware Support | 11 | 09-09-2009 10:37 PM |
| WinTV PVR 150, No longer recognized | milbarge | SageTV Linux | 3 | 08-07-2008 04:12 PM |
| PVR 350 recognized wrong? | phoch_00 | Hardware Support | 9 | 09-23-2003 08:33 PM |
| USB-UIRT Not Recognized | jglev | Hardware Support | 2 | 08-25-2003 07:23 PM |
| PVR-350 Not recognized | griffpa | SageTV Software | 4 | 08-22-2003 11:33 AM |
Linear Mode
