Problem with composite picture

[zsozso]

Hi All,
I wanted to digitalize Tv show from my Tv box via Composite with Sage. Picture is whole blue colour and noisy. I have hauppauge pvr 500 card. I thought my cable has problem, but I tried with WinTV apllication (arrived with Hauppauge card) and set composite settings and picture is OK. So my cable and driver seems to be OK.

Maybe Sage cannot show the composite picture good? Here is PAL system,

Any idea?
Thnx
Zs.

[zsozso]

Hi,

No1 tried to connect any device to Composite plug? Picture is OK?
Thnx,
Zs.

[bcjenkins]

Would you mind posting your Sage.properties file to the forum? If you add .txt to the end, you can upload it as an attachment.

B

[zsozso]

Originally Posted by bcjenkins

Would you mind posting your Sage.properties file to the forum? If you add .txt to the end, you can upload it as an attachment.

B

Here it is, i hope it helps
Zs.

[rickgillyon]

Originally Posted by zsozso

Maybe Sage cannot show the composite picture good? Here is PAL system

I used to use composite with a 500. Are you sure you set up the correct composite in Sage? There should be two...

[zsozso]

Originally Posted by rickgillyon

I used to use composite with a 500. Are you sure you set up the correct composite in Sage? There should be two...

Yep, on one Composite there is nothing, on the other noisy, blue shi... picture. Picture like if it could be like NTSC picture. But here is PAL system.

thnx
zs.

[rickgillyon]

Originally Posted by zsozso

Picture like if it could be like NTSC picture. But here is PAL system.

I don't know what your problem is, but it won't be PAL/NTSC. Watching a NTSC signal on PAL will show a picture IME, flickery and useless but you will see something. If you are in a PAL location and have a PAL tuner, that's not the issue...