|
|
|||||||
| Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
05-26-2017, 09:14 PM
|
||||
|
||||
|
OpenDCT / Linux - Channel Lineup
Hi - I used the SageWizdoms Script and it worked great to get me a Linux SageTV server going with OpenDCT, but I think I must be missing something?
My lineup includes all the channels I get but none of them work. It also has a mess of channels that aren't associated with the guide. (which do work) For instance for me ABC is 456 - it's enabled but if I tune to it I get nothing. If I tune to 9-456 (which also shows in the guide with no guide info) I get ABC. and if I remap 456 to 9-0-456 ABC works. Did I do something wrong or do I need to watch every channel that works, figure out what it is and remap it?? hoping and suspecting I mucked something up.
__________________
(current) SageServer: SageTV Open Source V9 - Virtual Ubuntu on Win10 HyperV MSI 970A-G46, AMD FX-8370 , SD Prime via OpenDCT, Donater ComSkip Clients: HD-200, Nexus Player w/ Android miniclient Storage: "nas" 16 drive Win10 w/ DrivePool running Plex, Emby, & SD PVR Retired - Hava, MediaMVP, HD-100, HD-PVR, HVR-2250, Ceton InfiniTV4, Original (white) HDHomeRun Died - HD-100, HD-300 Last edited by ThePaladinTech; 05-26-2017 at 09:19 PM. 
|
|
#2
05-30-2017, 02:05 AM
|
||||
|
||||
|
Are you using a CableCard in your prime, or getting the channels via ClearQAM?
__________________
Buy Fuzzy a beer! (Fuzzy likes beer) unRAID Server: i7-6700, 32GB RAM, Dual 128GB SSD cache and 13TB pool, with SageTVv9, openDCT, Logitech Media Server and Plex Media Server each in Dockers. Sources: HRHR Prime with Charter CableCard. HDHR-US for OTA. Primary Client: HD-300 through XBoxOne in Living Room, Samsung HLT-6189S Other Clients: Mi Box in Master Bedroom, HD-200 in kids room
|
|
#3
05-30-2017, 01:45 PM
|
||||
|
||||
|
Cable Card - works OK in WMC for what it's worth
__________________
(current) SageServer: SageTV Open Source V9 - Virtual Ubuntu on Win10 HyperV MSI 970A-G46, AMD FX-8370 , SD Prime via OpenDCT, Donater ComSkip Clients: HD-200, Nexus Player w/ Android miniclient Storage: "nas" 16 drive Win10 w/ DrivePool running Plex, Emby, & SD PVR Retired - Hava, MediaMVP, HD-100, HD-PVR, HVR-2250, Ceton InfiniTV4, Original (white) HDHomeRun Died - HD-100, HD-300
|
|
#4
05-30-2017, 06:11 PM
|
||||
|
||||
|
I think CableCard should only ever be tuned with a single logical number for each channel. Sage simply tells OpenDCT to tune to 456, and the hdhr internally matches that to a freq and subchannel from the table stored in the CableCard (or SDV tuning adapter, if used). Have you run a scan from within SageTV?
__________________
Buy Fuzzy a beer! (Fuzzy likes beer) unRAID Server: i7-6700, 32GB RAM, Dual 128GB SSD cache and 13TB pool, with SageTVv9, openDCT, Logitech Media Server and Plex Media Server each in Dockers. Sources: HRHR Prime with Charter CableCard. HDHR-US for OTA. Primary Client: HD-300 through XBoxOne in Living Room, Samsung HLT-6189S Other Clients: Mi Box in Master Bedroom, HD-200 in kids room
|
|
#5
05-30-2017, 06:22 PM
|
||||
|
||||
|
Also make sure you're using the capture device from OpenDCT (DCT- prefixed) and not the one provided by SageTV.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache). Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI. Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom). Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
|
|
#6
05-30-2017, 07:08 PM
|
||||
|
||||
|
Quote:
__________________
Buy Fuzzy a beer! (Fuzzy likes beer) unRAID Server: i7-6700, 32GB RAM, Dual 128GB SSD cache and 13TB pool, with SageTVv9, openDCT, Logitech Media Server and Plex Media Server each in Dockers. Sources: HRHR Prime with Charter CableCard. HDHR-US for OTA. Primary Client: HD-300 through XBoxOne in Living Room, Samsung HLT-6189S Other Clients: Mi Box in Master Bedroom, HD-200 in kids room
|
|
#7
05-31-2017, 02:05 PM
|
||||
|
||||
|
Quote:
and yes Fuzzy I did a scan within the app. Update- opendct not running at all. Used sagewizdoms script, so not sure why it's not running.
__________________
(current) SageServer: SageTV Open Source V9 - Virtual Ubuntu on Win10 HyperV MSI 970A-G46, AMD FX-8370 , SD Prime via OpenDCT, Donater ComSkip Clients: HD-200, Nexus Player w/ Android miniclient Storage: "nas" 16 drive Win10 w/ DrivePool running Plex, Emby, & SD PVR Retired - Hava, MediaMVP, HD-100, HD-PVR, HVR-2250, Ceton InfiniTV4, Original (white) HDHomeRun Died - HD-100, HD-300 Last edited by ThePaladinTech; 06-01-2017 at 07:06 AM.
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| problem tuning single channel with OpenDCT Docker | matt91 | SageTV for unRAID/Docker | 1 | 01-25-2017 01:58 PM |
| After channel lineup change, USBUIRT is tuning wrong channel | timg11 | Hardware Support | 1 | 08-28-2014 10:47 PM |
| TWC Rebuild of Channel Lineup - Lineup lost | gary201 | SageTV EPG Service | 14 | 11-08-2013 07:37 AM |
| Channel lineup not downloading or SageTV not clearing channel lineup when I remove it | TechBill | SageTV EPG Service | 2 | 01-26-2008 12:51 AM |
| Please wait while the channel lineup is downloaded for XMLTV Lineup | gafrol | SageTV EPG Service | 1 | 01-06-2006 08:08 AM |
Linear Mode
