|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Channels changed frequencies, now they don't work
Hi,
In my area, 2 sets of channels (7 channels/LCNs in total) changed frequencies due to government rules. After this happened, I haven't been able to get these channels in SageTV (Win 7 x64). I use LMGestion XMLTV Importer to get the guide from IceTV (Australia) into SageTV, and it worked fine before the frequency changes. I've now rescanned the channels in the HDHomerun setup and re-added the sources in SageTV...I can preview these channels in the HDHomerun setup, but I only get "No Signal" in SageTV for them. The EPG displays the right shows, but maybe they're the listings for the old frequencies or something. Any ideas what I need to do to fix this? Thanks |
#2
|
|||
|
|||
Hi Bane,
Same thing happened to me. I am no expert at this stuff, but the below info seemed to work for me. You will need to update the file PredefinedDVBT.frq (just search for it on your SageTV server) with the new frequencies. I updated the file with the following information (within the file, search for 'Canberra' to find the right place): "Australia-Canberra" frq:191500000;band:7; frq:177500000;band:7; frq:184500000;band:7; frq:226500000;band:7; frq:219500000;band:7; {tune:1;pat:6;sdt:16;} The frequencies were found at http://myswitch.digitalready.gov.au/ I also re-booted the server in case that was required. Then re-scan / update the sagetv sources. Please let us know how you get on. Good luck! |
#3
|
|||
|
|||
Thanks mate. I thought I'd subscribed to this thread, but apparently I didn't...no email, so I only saw your reply today. But I'll give it a try and post how it goes
|
#4
|
|||
|
|||
I finally got around to giving this a try...unfortunately it didn't work. I think it's on the right track though, something in this file or a similar one in the Sage config files is stopping it from working. I'm going to have a closer look at your link, maybe they changed again or are different for different towers around here or something...gonna fix this damn thing eventually
btw, is there no official SageTV support anymore? I sent them a message and got no response. Is SageTV even really active anymore since it was bought out? Merry Xmas all |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Updated Channel Logos For Changed Channels (e.g. VEL & H2) | voorhees | SageTV EPG Service | 2 | 10-29-2011 07:19 AM |
Channels have changed in program guide | MrOctober | SageTV EPG Service | 3 | 06-10-2009 02:36 PM |
QAM frequencies for scan do not match tuning frequencies | kricker | SageTV Software | 1 | 08-14-2008 12:12 AM |
Zap2it changed channels | webapprentice | SageTV EPG Service | 2 | 12-28-2005 10:10 AM |
Setting up channels from WinTV frequencies | Paraic | SageTV United Kingdom | 1 | 06-11-2004 04:39 PM |