Sage cannot locate HD Homerun as new source

[profit]

Due to Time Warner changing to switched digital my HDHR no longer works. I removed the tuner and installed a HD Homerun. The previews work fine with cable card etc...After restarting SAGE and going to the setup menu the device is not listed as a New Source I can add.

Is there something I need to do with Sage.properties file?

I have an existing HDPVR that works fine and is visible. I did remove the old HDHR etc...

[Toddly]

I believe you are going to need SageDCT to get the HD Prime to work with Sage. There is a large thread on this in the forum.

[KryptoNyte]

You will need SageDCT. The cablecard must be paired (by Time Warner) with the HDHomeRun Prime. You will only receive your local stations.

[profit]

thanks. I installed DCT but am unsure what do to next.

I have an HD PVR I see in sage. I do not see the homerun. Here is part of my properties file. Thanks for guidance. Feeling a bit sage rusty.

#Sage Preferences
#Sat Nov 15 21:23:16 EST 2014
ChannelScan/Silicondust\ HDHomeRun\ Tuner\ 1015A0E3-0\ Digital\ TV\ Tuner/Cincinnati\ Bell\ Cincinnati\ Digital\ -\ Cincinnati/LastScanResultList=xScanDoneTime,1308485860352;19605,xChanged,501,75-1,501,501,75-0-1;19606,xChanged,502,104-21,502,502,104-0-21;31228,xChanged,249,104-22,17,249,104-0-22;20288,xChanged,503,104-31,503,503,104-0-31;19594,xChanged,500,74-2,500,500,74-0-2;33147,xChanged,504,74-7,504,504,74-0-7;33169,xChanged,257,74-8,257,257,74-0-8;32416,xChanged,248,74-9,248,248,74-0-9;47724,xAddedChannel,920,920,74-1008-920,920,74-1008-920;36844,xLostTuning,243,243,null,243,null;58352,xLostTuning,201,201,null,201,null;23314,xLostTuning,6,6,null,6,null;18978,xLostTuning,253,253,null,253,null;15807,xLostTuning,237,237,null,237,null;44940,xLostTuning,238,238,null,238,null;18480,xLostTuning,214,214,null,214,null;33540,xLostTuning,256,256,null,256,null;14767,xLostTuning,18,18,null,18,null;14755,xLostTuning,224,224,null,224,null;18511,xLostTuning,207,207,null,207,null;16618,xLostTuning,205,205,null,205,null;16617,xLostTuning,208,208,null,208,null;16616,xLostTuning,206,206,null,206,null;17098,xLostTuning,10,10,null,10,null;16361,xLostTuning,234,234,null,234,null;16615,xLostTuning,209,209,null,209,null;11996,xLostTuning,3,3,null,3,null;23408,xLostTuning,100,100,null,100,null;29612,xLostTuning,215,215,null,215,null;21883,xLostTuning,204,204,null,204,null;58641,xLostTuning,260,260,null,260,null;58649,xLostTuning,244,244,null,244,null;21869,xLostTuning,226,226,null,226,null;16409,xLostTuning,228,228,null,228,null;66804,xLostTuning,235,235,null,235,null;46762,xLostTuning,229,229,null,229,null;29020,xLostTuning,246,246,null,246,null;62079,xLostTuning,202,202,null,202,null;33668,xLostTuning,564,564,null,564,null;30509,xLostTuning,247,247,null,247,null;17532,xLostTuning,254,254,null,254,null;61522,xLostTuning,218,218,null,218,null;63679,xLostTuning,271,271,null,271,null;63678,xLostTuning,270,270,null,270,null;10269,xLostTuning,20,20,null,20,null;46811,xLostTuning,23,23,null,23,null;11339,xLostTuning,13,13,null,13,null;17021,xLostTuning,222,222,null,222,null;21781,xLostTuning,239,239,null,239,null;17927,xLostTuning,313,313,null,313,null;21762,xLostTuning,213,213,null,213,null;34215,xLostTuning,203,203,null,203,null;11363,xLostTuning,9,9,null,9,null;11661,xLostTuning,5,5,null,5,null;23671,xLostTuning,96,96,null,96,null;35513,xLostTuning,236,236,null,236,null;

[nyplayer]

Originally Posted by profit

thanks. I installed DCT but am unsure what do to next.

I have an HD PVR I see in sage. I do not see the homerun. Here is part of my properties file. Thanks for guidance. Feeling a bit sage rusty.

#Sage Preferences
#Sat Nov 15 21:23:16 EST 2014
ChannelScan/Silicondust\ HDHomeRun\ Tuner\ 1015A0E3-0\ Digital\ TV\ Tuner/Cincinnati\ Bell\ Cincinnati\ Digital\ -\ Cincinnati/LastScanResultList=xScanDoneTime,1308485860352;19605,xChanged,501,75-1,501,501,75-0-1;19606,xChanged,502,104-21,502,502,104-0-21;31228,xChanged,249,104-22,17,249,104-0-22;20288,xChanged,503,104-31,503,503,104-0-31;19594,xChanged,500,74-2,500,500,74-0-2;33147,xChanged,504,74-7,504,504,74-0-7;33169,xChanged,257,74-8,257,257,74-0-8;32416,xChanged,248,74-9,248,248,74-0-9;47724,xAddedChannel,920,920,74-1008-920,920,74-1008-920;36844,xLostTuning,243,243,null,243,null;58352,xLostTuning,201,201,null,201,null;23314,xLostTuning,6,6,null,6,null;18978,xLostTuning,253,253,null,253,null;15807,xLostTuning,237,237,null,237,null;44940,xLostTuning,238,238,null,238,null;18480,xLostTuning,214,214,null,214,null;33540,xLostTuning,256,256,null,256,null;14767,xLostTuning,18,18,null,18,null;14755,xLostTuning,224,224,null,224,null;18511,xLostTuning,207,207,null,207,null;16618,xLostTuning,205,205,null,205,null;16617,xLostTuning,208,208,null,208,null;16616,xLostTuning,206,206,null,206,null;17098,xLostTuning,10,10,null,10,null;16361,xLostTuning,234,234,null,234,null;16615,xLostTuning,209,209,null,209,null;11996,xLostTuning,3,3,null,3,null;23408,xLostTuning,100,100,null,100,null;29612,xLostTuning,215,215,null,215,null;21883,xLostTuning,204,204,null,204,null;58641,xLostTuning,260,260,null,260,null;58649,xLostTuning,244,244,null,244,null;21869,xLostTuning,226,226,null,226,null;16409,xLostTuning,228,228,null,228,null;66804,xLostTuning,235,235,null,235,null;46762,xLostTuning,229,229,null,229,null;29020,xLostTuning,246,246,null,246,null;62079,xLostTuning,202,202,null,202,null;33668,xLostTuning,564,564,null,564,null;30509,xLostTuning,247,247,null,247,null;17532,xLostTuning,254,254,null,254,null;61522,xLostTuning,218,218,null,218,null;63679,xLostTuning,271,271,null,271,null;63678,xLostTuning,270,270,null,270,null;10269,xLostTuning,20,20,null,20,null;46811,xLostTuning,23,23,null,23,null;11339,xLostTuning,13,13,null,13,null;17021,xLostTuning,222,222,null,222,null;21781,xLostTuning,239,239,null,239,null;17927,xLostTuning,313,313,null,313,null;21762,xLostTuning,213,213,null,213,null;34215,xLostTuning,203,203,null,203,null;11363,xLostTuning,9,9,null,9,null;11661,xLostTuning,5,5,null,5,null;23671,xLostTuning,96,96,null,96,null;35513,xLostTuning,236,236,null,236,null;

You need to generate the assignments.... and copy them to the sage.properties file.

follow this guide.
http://babgvant.com/files/folders/sa...ntry19846.aspx

[profit]

Status update:

Wife=mad
Kids=upset
HDHomerun works fine outside of Sage
Using SageDCT I generated assignments and copied into my sage.properties file
The tuners show up. I assign an EPG Lineup but...
Sage shows Functioning as False
When I try to tune a channel Error (-10) No encoders can tune the selected station

Help...here is part of sage.properties

mmc/encoders/123456970/100/0/available_channels=
mmc/encoders/123456970/100/0/brightness=0
mmc/encoders/123456970/100/0/contrast=0
mmc/encoders/123456970/100/0/device_name=
mmc/encoders/123456970/100/0/encode_digital_tv_as_program_stream=false
mmc/encoders/123456970/100/0/hue=0
mmc/encoders/123456970/100/0/last_channel=2
mmc/encoders/123456970/100/0/provider_id=40453653930
mmc/encoders/123456970/100/0/saturation=0
mmc/encoders/123456970/100/0/sharpness=0
mmc/encoders/123456970/100/0/tuning_mode=Cable
mmc/encoders/123456970/100/0/tuning_plugin=
mmc/encoders/123456970/100/0/tuning_plugin_port=0
mmc/encoders/123456970/100/0/video_crossbar_index=0
mmc/encoders/123456970/100/0/video_crossbar_type=100
mmc/encoders/123456970/audio_capture_device_index=-1
mmc/encoders/123456970/audio_capture_device_name=
mmc/encoders/123456970/audio_capture_device_num=0
mmc/encoders/123456970/audio_processor=
mmc/encoders/123456970/broadcast_standard=
mmc/encoders/123456970/capture_config=299008
mmc/encoders/123456970/default_device_quality=
mmc/encoders/123456970/delay_to_wait_after_tuning=10000
mmc/encoders/123456970/device_class=
mmc/encoders/123456970/dshow_tv_type=
mmc/encoders/123456970/encoder_merit=0
mmc/encoders/123456970/encoding_host=192.168.1.7\:6970
mmc/encoders/123456970/forced_video_storage_path_prefix=
mmc/encoders/123456970/last_cross_index=0
mmc/encoders/123456970/last_cross_type=100
mmc/encoders/123456970/live_audio_input=
mmc/encoders/123456970/multicast_host=
mmc/encoders/123456970/never_stop_encoding=false
mmc/encoders/123456970/video_capture_device_name=SageDCT-HDHomeRun Prime Tuner 1315FCB7-1
mmc/encoders/123456970/video_capture_device_num=0
mmc/encoders/123456970/video_encoding_params=MPEG2 Max Quality
mmc/encoders/123456970/video_processor=
mmc/encoders/123456972/100/0/available_channels=
mmc/encoders/123456972/100/0/brightness=0
mmc/encoders/123456972/100/0/contrast=0
mmc/encoders/123456972/100/0/device_name=
mmc/encoders/123456972/100/0/encode_digital_tv_as_program_stream=false
mmc/encoders/123456972/100/0/hue=0
mmc/encoders/123456972/100/0/last_channel=2
mmc/encoders/123456972/100/0/provider_id=40453653930
mmc/encoders/123456972/100/0/saturation=0
mmc/encoders/123456972/100/0/sharpness=0
mmc/encoders/123456972/100/0/tuning_mode=Cable
mmc/encoders/123456972/100/0/tuning_plugin=
mmc/encoders/123456972/100/0/tuning_plugin_port=0
mmc/encoders/123456972/100/0/video_crossbar_index=0
mmc/encoders/123456972/100/0/video_crossbar_type=100
mmc/encoders/123456972/audio_capture_device_index=-1

[madMan]

Try this mate:

http://babgvant.com/blogs/andyvt/arc...te-needed.aspx

Spent hours trying to figure this out recently until I happened upon it!

[Fuzzy]

or better yet, move away from SageDCT to the PrimeNetEncoder implementation.

http://forums.sagetv.com/forums/showthread.php?t=62055

[waynedunham]

My Win8 machine has a glitch with SageDCT. Whenever I reboot the machine, rarely do that but......, I will get tuning errors with usually 2 of the 3 tuners on my Prime and rarely all 3 won't work.
After generating assignments multiple times and even resorting to manually editing Sage.properties to switch the ports that SageDCT uses for the "lost" tuners I accidentally found the solution.

While in the SageDCT config program during one or my tests (using the test tab to see if I could talk to the individual tuners) I did a stop and start of the service on the service tab of SageDCT config and suddenly all the tuners were working again.
I ran a couple more tests by rebooting the machine and sure enough 1 or 2 of the tuners wouldn't work through SageDCT (but always worked in the HDHomerun utilities). A simple stop/start of the SageDCT service in the service tab and all tuners worked again with no other changes.
It will continue to work just fine until the next time I reboot the computer.

Pretty bizarre but it is 100% repeatable on that computer. So I just have to remember to stop/start the SageDCT service after the computer is finished booting up each time. (I forgot to do that one time I went away for a few days and lost a couple nights worth of recordings before I checked in remotely and said "D'ooooh!!")