SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support
Forum Rules FAQs Community Downloads Today's Posts Search

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-07-2011, 08:12 AM
pjpjpjpj pjpjpjpj is offline
Sage Icon
 
Join Date: Feb 2008
Posts: 2,164
Single home video camera?

I would like to add a video camera in our nursery, but I don't know a lot about network stuff, and I don't want to mess with multi-camera home security systems or cameras which require extra hardware, or even software on the PC that would need to be accessed via a Sage plugin (WFE or whatever).

What I would like is a single, networked camera (that I could just connect to my switch via CAT cable), which would show up in SageTV as a new tuner I could add, such that I could then add a channel in my EPG that would be the camera feed.

Does such a device exist?
__________________
Server: AMD Athlon II x4 635 2.9GHz, 8 Gb RAM, Win 10 x64, Java 8, Gigabit network
Drives: Several TB of internal SATA and external USB drives, no NAS or RAID or such...
Software: SageTV v9x64, stock STV with ADM.
Tuners: 4 tuners via (2) HDHomeruns (100% OTA, DIY antennas in the attic).
Clients: Several HD300s, HD200s, even an old HD100, all on wired LAN. Latest firmware for each.
Reply With Quote
  #2  
Old 06-07-2011, 08:34 AM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
 
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
I did this for our baby. I am using a y-cam knight, whilc expensive it is a phenominal networked camera.

The biggest issue i had with it and the reason i decided to get a secured audio/video only camera for baby monitoring is due to the lag from sage.

The way i set mine up was i use WFE to grab the video/audio and send it over to sage via the guide. This worked but it takes 8 - 10 seconds to tune the channel, and then once it is tuned the video is roughly 20 seconds behind live. In my wifes opinion :-) this was way to much lag to use as a baby camera.

I suppose it could be possible to hook the camera directly to a tuner card, but im not sure how that would work. I gave up on the integration idea with sage because it to me just wasn't worth it. for 79 i got a secured camera with a 3.5" lcd screen, and the ability to control/watch up to 4 cameras..

the only way this solution would be useful to me is if i decided to build a plugin which would allow for picture in picture.

this is the camera i got for baby cam. its simple, easy to setup, expandable, can be used with outdoor cameras, and can be hooked up to computer..so you could put the base next to yoru sage server and use a tuner card to capture audio and video if you so choose :-)

http://www.amazon.com/gp/product/B002KFZSJQ

I ordered mine from BIGZELECTRONICS from 79.90...i have 2 actually one for the inlaws.
Reply With Quote
  #3  
Old 06-07-2011, 09:49 AM
pjpjpjpj pjpjpjpj is offline
Sage Icon
 
Join Date: Feb 2008
Posts: 2,164
Thanks, Pix, I had read your posts about that in another thread, but I was really hoping there would be something that would show up as a network "tuner", the way that an HDHR does. I didn't want to go through WFE because of the lag.

I have a feeling that a gadget like I am imagining doesn't exist...
__________________
Server: AMD Athlon II x4 635 2.9GHz, 8 Gb RAM, Win 10 x64, Java 8, Gigabit network
Drives: Several TB of internal SATA and external USB drives, no NAS or RAID or such...
Software: SageTV v9x64, stock STV with ADM.
Tuners: 4 tuners via (2) HDHomeruns (100% OTA, DIY antennas in the attic).
Clients: Several HD300s, HD200s, even an old HD100, all on wired LAN. Latest firmware for each.
Reply With Quote
  #4  
Old 06-07-2011, 10:01 AM
jnickels jnickels is offline
Sage User
 
Join Date: Dec 2010
Location: Denver, CO
Posts: 11
Did you see this thread?

http://forums.sagetv.com/forums/showthread.php?t=52820

My setup is described...not IP based cameras, but rock solid for the past ~5 years.
Reply With Quote
  #5  
Old 06-07-2011, 10:10 AM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
 
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
I did see that, but how useful is that really?

you just leave your TV on all night so that the babycam is up?

i would personally much rather have a small portable unit that can have the display go to sleep and leave sound on. i guess its just a personal pref.

While this solution is cool, and i myself was going to do the same thing, i struggle to see the actual need or usefulness of it other than its "cool"

cause dont' get me wrong it is really cool!
Reply With Quote
  #6  
Old 06-07-2011, 10:56 AM
jnickels jnickels is offline
Sage User
 
Join Date: Dec 2010
Location: Denver, CO
Posts: 11
To each their own, but we find it very useful.

The cameras are only for video, we have some cheap traditional audio baby monitors for sound, which stay on 24/7. If we hear something and want to check on the kids, we can flip the channel on any TV in the house and can see what'd going on.

An additional benefit of having the cameras viewable thru Sage is the cameras are viewable from any internet connections (via placeshifter). Great for out-of-state grand parents that want to 'check up' on the kids...or for parents who travel for business.
Reply With Quote
  #7  
Old 06-07-2011, 02:29 PM
bastafidli bastafidli is offline
Sage Expert
 
Join Date: Dec 2007
Location: Charlottesville, VA
Posts: 728
Did you look at this?

http://foscam.us/blog/foscamipcamera...-on-an-iphone/

These cameras are pretty reasonable.
__________________

TV: Samsung UN46D8000
Server: Intel Core i3 540, 4G RAM, Matrox G450, 70GB EXT3 encrypted software RAID1 system drive, 1TB XFS tv recording drive, 2TB EXT3 encrypted data drive mirror across 2 machines, 2TB EXT3 encrypted media drive mirror across 2 machines, CentOS 6 64 bit, Experimenting with DNLA servers
1Gb wired network
Disconnected after G day[HD 100 Media Extender, Placeshifter 7.x, SageTV 7.x, HDHomeRun]
Reply With Quote
  #8  
Old 06-07-2011, 02:34 PM
Crunch's Avatar
Crunch Crunch is offline
Sage Advanced User
 
Join Date: Jan 2007
Posts: 123
I use Sharx SCNC2607 inside and SCNC3605 outside.
They plain work. View form all devices our family have including my droid phone and Ipad. Get email alerts. etc etc heaps of settings in camera admin.


I use lowrieweb /dynamicip to keep my ip up todate on website where we can see cameras. It just updates my ip into the index.html file whenever my ip changes. Document online is poor but when installed it has a help tab that has templates etc to get you going.

Been running for two years and just works. I think they have the software / firmware on camera down pat so no troubles.
Look at Amazon rating 4 1/2 stars on 66 ratings.
Reply With Quote
  #9  
Old 06-07-2011, 02:52 PM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
 
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
thats the y-cam i mentioned above. works well, but still has some delays about 4 - 5 seconds, and with babymonitor HD app for iphone its about 10 seconds. not good enough for my wife and our first born son who isn't here yet...

GREAT camera though!
Reply With Quote
  #10  
Old 06-07-2011, 03:31 PM
pjpjpjpj pjpjpjpj is offline
Sage Icon
 
Join Date: Feb 2008
Posts: 2,164
Quote:
Originally Posted by bastafidli View Post
Did you look at this?

http://foscam.us/blog/foscamipcamera...-on-an-iphone/

These cameras are pretty reasonable.
Anyone have one of these? Does it work - in other words, does/would it show up as a network "tuner" in Sage?
(this one: http://foscam.us/foscam-fi8918w-whit...camera-21.html)
__________________
Server: AMD Athlon II x4 635 2.9GHz, 8 Gb RAM, Win 10 x64, Java 8, Gigabit network
Drives: Several TB of internal SATA and external USB drives, no NAS or RAID or such...
Software: SageTV v9x64, stock STV with ADM.
Tuners: 4 tuners via (2) HDHomeruns (100% OTA, DIY antennas in the attic).
Clients: Several HD300s, HD200s, even an old HD100, all on wired LAN. Latest firmware for each.
Reply With Quote
  #11  
Old 06-07-2011, 03:35 PM
bastafidli bastafidli is offline
Sage Expert
 
Join Date: Dec 2007
Location: Charlottesville, VA
Posts: 728
Quote:
Originally Posted by pjpjpjpj View Post
Anyone have one of these? Does it work - in other words, does/would it show up as a network "tuner" in Sage?
(this one: http://foscam.us/foscam-fi8918w-whit...camera-21.html)
I bought two of these during recent sale, but have not deployed them yet. Based on this

http://www.gadgetvictims.com/2009/07...-part-two.html

they can be used as an input to VLC and therefore I would assume they should be usable with the Radio plugin or something along those lines.
__________________

TV: Samsung UN46D8000
Server: Intel Core i3 540, 4G RAM, Matrox G450, 70GB EXT3 encrypted software RAID1 system drive, 1TB XFS tv recording drive, 2TB EXT3 encrypted data drive mirror across 2 machines, 2TB EXT3 encrypted media drive mirror across 2 machines, CentOS 6 64 bit, Experimenting with DNLA servers
1Gb wired network
Disconnected after G day[HD 100 Media Extender, Placeshifter 7.x, SageTV 7.x, HDHomeRun]
Reply With Quote
  #12  
Old 06-08-2011, 11:58 AM
Polypro Polypro is offline
Sage Icon
 
Join Date: Jun 2005
Posts: 1,804
I know you listed what you *didn't* want, but I have to chime in with my setup anyway

I run Sage Server/Client on the same box on the main TV. After messing around with different solutions, I settled on running Blue Iris on the same machine, and adding a 21" LCD to my second video out put. I dragged Blue Iris to the second monitor, and all I have to do is glance down and left to see all my cameras displaying 30fps live views. The LCD sits on my sub woofer, and in full screen mode the screen is black with just the camera images...so it isn't distracting while watching TV.

As far as BI goes, it's the best $49 you'll ever spend. It can use almost *any* camera. I have a mixture of PoE, 802.11n, and web cams on 50ft USB active extensions. You can view from any browser in the house, or on any computer in the world (DynDNS or Hamachi is how I access it), or even on your phone. Email and SMS alerts, etc... There is really too much to list. Support is quick too if you need it. Not affiliated, just a cutomer.

http://www.blueirissoftware.com/3.html

P

Pic:


Last edited by Polypro; 06-08-2011 at 12:07 PM.
Reply With Quote
  #13  
Old 06-08-2011, 01:13 PM
macsupergeek macsupergeek is offline
Sage Advanced User
 
Join Date: Sep 2008
Location: NJ
Posts: 161
I am using the Foscam FI8918W, no zoom but pan and tilt is great and so is the night vision IR. I have WebFeedEncoder setup and I set channel 1 to be the webcam and I was thinking about doing another one as it was so easy to do. So from any extender (I have 3) or placeshifter I can tune in channel 1 and there is the baby cam. I also have the free app setup on my iPhone that I can view and control (i can't control the webcam from sagetv).
__________________
SERVER: Dual Core Xeon 3.0GHz 5160, 8gb RAM, Win7 x64, SageTV 9.0.13.536 w/ BMT, WebUI, OpenDCT, Java 1.70_79
TUNERS: 2 x Ceton PCIe InfinitiTV - FIOS
STORAGE: UNRAID - 8tb for archived shows, DVDs, pictures and music
CLIENTS: 2 x HD200s, 2 x HD300
Reply With Quote
  #14  
Old 06-09-2011, 10:37 AM
pjpjpjpj pjpjpjpj is offline
Sage Icon
 
Join Date: Feb 2008
Posts: 2,164
Quote:
Originally Posted by macsupergeek View Post
I am using the Foscam FI8918W, no zoom but pan and tilt is great and so is the night vision IR. I have WebFeedEncoder setup and I set channel 1 to be the webcam and I was thinking about doing another one as it was so easy to do. So from any extender (I have 3) or placeshifter I can tune in channel 1 and there is the baby cam. I also have the free app setup on my iPhone that I can view and control (i can't control the webcam from sagetv).
So it doesn't show up as a tuner, then (you checked, I assume)... how much time lag is there through WFE?
__________________
Server: AMD Athlon II x4 635 2.9GHz, 8 Gb RAM, Win 10 x64, Java 8, Gigabit network
Drives: Several TB of internal SATA and external USB drives, no NAS or RAID or such...
Software: SageTV v9x64, stock STV with ADM.
Tuners: 4 tuners via (2) HDHomeruns (100% OTA, DIY antennas in the attic).
Clients: Several HD300s, HD200s, even an old HD100, all on wired LAN. Latest firmware for each.
Reply With Quote
  #15  
Old 06-09-2011, 12:18 PM
macsupergeek macsupergeek is offline
Sage Advanced User
 
Join Date: Sep 2008
Location: NJ
Posts: 161
Quote:
Originally Posted by pjpjpjpj View Post
So it doesn't show up as a tuner, then (you checked, I assume)... how much time lag is there through WFE?
Orb sees it as a network camera, but can't attach to it. It does show up as a Video Source in SageTV but only because WFE is publishing the link to the camera. There is a specific address to get the live video feed and not just the IP. As for the delay it is definitely a few seconds behind live, we usually hear my son crying on the audio monitor and then flip to the feed and we can see what happened so that's got to be like 10-15 seconds. I really wasn't looking for live and no delay I was looking more for 100% WAF and between her being able to pop on the iPhone for almost no delay and also being to switch to the cam when she is watching TV, I think I have at least 99.9% and that last bit is that stupid spinning circle that comes up and lags all of Sage when you least want it to.
__________________
SERVER: Dual Core Xeon 3.0GHz 5160, 8gb RAM, Win7 x64, SageTV 9.0.13.536 w/ BMT, WebUI, OpenDCT, Java 1.70_79
TUNERS: 2 x Ceton PCIe InfinitiTV - FIOS
STORAGE: UNRAID - 8tb for archived shows, DVDs, pictures and music
CLIENTS: 2 x HD200s, 2 x HD300
Reply With Quote
  #16  
Old 06-09-2011, 12:52 PM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
 
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
Quote:
Originally Posted by pjpjpjpj View Post
So it doesn't show up as a tuner, then (you checked, I assume)... how much time lag is there through WFE?
With my setup Y-Cam and WFE it was about 25 - 30 seconds lag.

1) start feed through WFE
2) access cam and turn it on
3) WFE needs to start vlc
4) vlc needs to tune the channel
5) sage needs to start recording
6) display to TV

There was so much lag it was unusable in my opinion as a baby cam. Reading this thread, and a few others that were posted in this thread (links) i have an idea that i am going to try which will utlize my y-cam and use another a spare tuner as input. it shoudl remove all delay and provide a solid solution with my ip cam. ill report back and let ya know if it works well.
Reply With Quote
  #17  
Old 06-10-2011, 02:03 PM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
 
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
Alright i followed some other posts..thanks to all on that post and got my y-cam working with a more acceptable delay in sage.

here is what i did

1) Setup y-cam of course
2) setup my sageTV server with a second cheapo video card i had lying around which has s-video output on it.
3) set the y-cam multiview live to always display in full screen on the second monitor
4) set the 2nd and 3rd monitor (3rd being the s-video output ) to clone
5) mapped a channel in sage to the s-video input
6) for sound i have server output sound going directly into the tuner card.

This setup has proven for me to work quite well. There is about a 4 - 5 second delay which in my opinion is much more acceptable. I now have a second camera in the baby's room which is available on all TV's, available via any computer, and available outside of the house. If it ever breaks or stops working when im not home then wifey can still use the exceptional uniden camera i posted earlier in this thread.

I am goign to try viewing it "psuedo-live" via the mobile web ui later, but i don't see any reason that it shouldn't work in close to real time.
Reply With Quote
  #18  
Old 06-11-2011, 09:33 AM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
 
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
Here is the larger screen version and multiple cameras. It's a good deal. I may have to get another.

http://sellout.woot.com/
Reply With Quote
  #19  
Old 06-16-2011, 09:21 AM
wrems's Avatar
wrems wrems is offline
Sage Icon
 
Join Date: Feb 2007
Location: Marietta, GA
Posts: 1,332
What if you grabbed one of these little tv’s:

http://www.newegg.com/Product/Produc..._-89263090-L0B

Then set a camera up on it’s own analog tuner, and reclaim an old MediaMVP to connect to the above small TV and just have a continuous feed running into the tv...

For $25, it’s a nice little video baby monitor. I wonder if the onboard controls would work to fully navigate the UI?

Do you guys think a setup like that would work well as far as latency? It's got me thinking of doing the same...
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
HD200 : Home videos on AVI taken with Casio Exlim camera stutter michaeldjcox SageTV Media Extender 2 11-22-2009 02:15 AM
EPG for single channel s-video possible? olymatt SageTV EPG Service 1 03-02-2009 07:01 PM
1080p video camera for $150 sleonard The SageTV Community 6 09-12-2008 11:04 AM
Home Security - Recored from Camera MattJackson86 Hardware Support 9 09-08-2008 04:21 PM
A single location for all video? robbc SageTV Software 5 06-02-2007 07:35 PM


All times are GMT -6. The time now is 03:46 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.