|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
FTDI USB NMC-2.5M Cable
Has anyone tried one of these cables for DirecTV Tuning?
http://www.ftdichip.com/Products/Eva...BNullModem.htm I ordered one and will be testing on a DirecTV H20. B
__________________
Running SageTV on unRAID via Docker Tuning handled by HDHR3-6CC-3X2 using OpenDCT |
#2
|
||||
|
||||
Interesting. Where are you getting it from and how much does it cost?
|
#3
|
|||
|
|||
It'll be $42ish with shipping.
http://www.mouser.com/Search/Product...5-USB-NMC-2.5M Considering PatersonTech + USB adapter is ~$60 I thought I would try this. B
__________________
Running SageTV on unRAID via Docker Tuning handled by HDHR3-6CC-3X2 using OpenDCT |
#4
|
||||
|
||||
That does sound like a good deal if you're just starting down this path. Unfortunately I've already got 4 PatersonTech devices already working (well most of the time). If it works I might be interested just because it would be much cleaner.
|
#5
|
|||
|
|||
I had good luck with Paterson in the past. Switched to FiOS and sold the kit. Then moved and am back to DirecTV. Something changed in a firmware update a few weeks ago and it is now more sensitive in channel changing via IR. Looking at implementing full kit again it was over $200 for 4 receivers...
B
__________________
Running SageTV on unRAID via Docker Tuning handled by HDHR3-6CC-3X2 using OpenDCT |
#6
|
||||
|
||||
Please keep us posted if it works.
|
#7
|
|||
|
|||
For the record, it did not work. This is due to the driver not being supported in the DirecTV box. There was another thread which spoke of this, but not by part number
http://forums.sagetv.com/forums/show...87&postcount=4 I did find this site too: http://www.cooldvr.com/Buy.html which has a "kit" prepackaged. I will buy one of their $21 units for testing. B
__________________
Running SageTV on unRAID via Docker Tuning handled by HDHR3-6CC-3X2 using OpenDCT |
#8
|
||||
|
||||
Were you able to get more information about the kit? I'm wondering if it's just a couple of the serial-usb cables and a null modem or a single cable. If it is the former then it doesn't buy much other than getting stuff all together.
|
#9
|
|||
|
|||
I think I am going to try and source something from China. I'll need to find a provider, but I know someone is making it.
http://cgi.ebay.com/ws/eBayISAPI.dll...ht_1858wt_1167 What are thoughts on a pigtail USB A Male to RJ45 Female in about 3" length based on a PL2303 chip. Buy two, use a standard ethernet cable to connect (or would it be crossover?) Then you can custom length what is needed. The pigtail is needed to extend past the back of a computer without being too long to get in the way. B
__________________
Running SageTV on unRAID via Docker Tuning handled by HDHR3-6CC-3X2 using OpenDCT |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
USB cable tuner | rubell | Hardware Support | 3 | 08-25-2009 02:00 PM |
Controlling Cable Box w/ USB-UIRT | Herky | Hardware Support | 3 | 06-11-2007 07:36 AM |
Cable box IR Port to USB | spook | Hardware Support | 2 | 08-06-2006 12:50 AM |
Cable Box compatible with USB-UIRT IR Blaster ?? | shadowhc | Hardware Support | 2 | 05-26-2005 12:44 PM |
Direct USB control of Digital Cable Box? | Stratos | Hardware Support | 3 | 04-14-2004 10:02 AM |