SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support
Forum Rules FAQs Community Downloads Today's Posts Search

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-01-2017, 06:07 PM
PeteCress's Avatar
PeteCress PeteCress is offline
Sage Fanatic
 
Join Date: Jan 2009
Location: Paoli, PA - USA, AKA "The Navel Of The Universe"
Posts: 843
HD Homerun OTA: "No video capture devices were found...

...Please install a video capture device to use with SageTV."

I think I've jumped from the frying pan into the fire on this one.

Sage was seeing my HD HomeRuns awhile ago... And I was even able to delete them and then re-add them specifying my SchedulesDirect ID/PW - but, although the Program Guide looked good, I kept getting "No Signal" when trying to tune a channel.

Then I started groping around to resolve the "No Signal" problem..... and I must've done something bad because now Sage does not even see the tuners for me to set up.
  • HD HomeRun Setup sees them
    .
  • HD HomeRun Config GUI will render a video stream if I tell it to "View" a channel...
    .
  • NetScan sees them
    .
  • they are pingable.

But Sage is not seeing them.

Ran a full channel scan on each tuner, re-booted a couple times, but no-go.

I cannot channel-scan the tuners in SageTV because I cannot add the tuners to Sage bc Sage says there are none to add.
__________________
Server: SageTV 9, Windows 10, i5 NUC
Clients: HD200*3 over Cat5e Ethernet + 1 slightly flakey HD 300 + 1 HD200 remote at another residence
Plugins: (none yet, looking for recommendations)
Storage: NetGear Ultra-6 NAS 10 TB total w/dual redundancy. Plus 5tb QNAP for RecordedTV.
Capture: 3 Silicon Dust HomeRun tuner boxes (6 tuners total)
Program Source: OTA antenna

Last edited by PeteCress; 06-01-2017 at 06:13 PM.
Reply With Quote
  #2  
Old 06-01-2017, 09:02 PM
Fuzzy's Avatar
Fuzzy Fuzzy is offline
SageTVaholic
 
Join Date: Sep 2005
Location: Jurupa Valley, CA
Posts: 9,957
We'd need to see your log and properties file to have any hope of helping you out.
__________________
Buy Fuzzy a beer! (Fuzzy likes beer)

unRAID Server: i7-6700, 32GB RAM, Dual 128GB SSD cache and 13TB pool, with SageTVv9, openDCT, Logitech Media Server and Plex Media Server each in Dockers.
Sources: HRHR Prime with Charter CableCard. HDHR-US for OTA.
Primary Client: HD-300 through XBoxOne in Living Room, Samsung HLT-6189S
Other Clients: Mi Box in Master Bedroom, HD-200 in kids room
Reply With Quote
  #3  
Old 06-01-2017, 10:06 PM
JustFred JustFred is offline
Sage Expert
 
Join Date: May 2015
Location: Sunnyvale, Ca
Posts: 572
Do you use the Sage service? The HDHR service must up and running before the Sage service starts. A quick way to see if sequencing is the problem: verify that the HDHR service is running, then manually (re)start the Sage service. If Sage now sees the tuners, you've identified the likely cause.
__________________
System #1: Win7-64, I7-920, 8 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HDHR-US (1st gen white) tuners. HD-200.
System #2: Win7-64, I7-920, 8 GB mem, 4TB HD. Java 1.8.0_131. Sage v9.1.6.747. ClearQAM: 2x HDHR3-US tuners. HD-200.
System #3: Win7-64, I7-920, 12 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HVR2250; Spectrum Cable via HDPVR & USB-UIRT. 3x HD-200.
Reply With Quote
  #4  
Old 06-02-2017, 01:13 AM
Fuzzy's Avatar
Fuzzy Fuzzy is offline
SageTVaholic
 
Join Date: Sep 2005
Location: Jurupa Valley, CA
Posts: 9,957
Quote:
Originally Posted by JustFred View Post
Do you use the Sage service? The HDHR service must up and running before the Sage service starts. A quick way to see if sequencing is the problem: verify that the HDHR service is running, then manually (re)start the Sage service. If Sage now sees the tuners, you've identified the likely cause.
There is no HDHR service, if he's accessing them directly from Sage (as opposed to using OpenDCT).
__________________
Buy Fuzzy a beer! (Fuzzy likes beer)

unRAID Server: i7-6700, 32GB RAM, Dual 128GB SSD cache and 13TB pool, with SageTVv9, openDCT, Logitech Media Server and Plex Media Server each in Dockers.
Sources: HRHR Prime with Charter CableCard. HDHR-US for OTA.
Primary Client: HD-300 through XBoxOne in Living Room, Samsung HLT-6189S
Other Clients: Mi Box in Master Bedroom, HD-200 in kids room
Reply With Quote
  #5  
Old 06-02-2017, 07:56 AM
PeteCress's Avatar
PeteCress PeteCress is offline
Sage Fanatic
 
Join Date: Jan 2009
Location: Paoli, PA - USA, AKA "The Navel Of The Universe"
Posts: 843
Quote:
Originally Posted by Fuzzy View Post
We'd need to see your log and properties file to have any hope of helping you out.
I'm looking at SageTVmsgs.log and it's looking to me like there's an issue with my lineup name, but the forum keeps saying "Invalid File" when I try to upload it.

The forum SW says it's too long as-is to paste, so here's a snip from near the end that seems to say something ab out an EPG name issue - but that would seem moot in light of Sage not having any tuners added and not seeing any to add.
Code:
pri=2;type=1002;time=1494609069977;msg=The lineup "Philadelphia - Digital Broadcast" no longer exists on the EPG server. Updates to this lineup will no longer occur.;VLineup=Philadelphia - Digital Broadcast;
pri=2;type=1002;time=1494695490449;msg=The lineup "Philadelphia - Digital Broadcast" no longer exists on the EPG server. Updates to this lineup will no longer occur.;end=1494713148605;rep=3;VLineup=Philadelphia - Digital Broadcast;
pri=2;type=1002;time=1494799595797;msg=The lineup "Philadelphia - Digital Broadcast" no longer exists on the EPG server. Updates to this lineup will no longer occur.;VLineup=Philadelphia - Digital Broadcast;
pri=2;type=1002;time=1494886010539;msg=The lineup "Philadelphia - Digital Broadcast" no longer exists on the EPG server. Updates to this lineup will no longer occur.;VLineup=Philadelphia - Digital Broadcast;
pri=3;type=1102;time=1494975602380;msg=The device input "Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner" failed to record "PBS NewsHour" on WHYYDT on physical channel 12-12-1 at Tue 5/16 18:00. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-0;VPhysicalChannel=12-12-1;VStartTime=1494972000000;VChannelName=WHYYDT;VTitle=PBS NewsHour;
pri=3;type=1102;time=1494975602510;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner" failed to record "ABC World News Tonight With David Muir" on WPVIDT on physical channel 6-6-1 at Tue 5/16 18:30. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-1;VPhysicalChannel=6-6-1;VStartTime=1494973800000;VChannelName=WPVIDT;VTitle=ABC World News Tonight With David Muir;
pri=3;type=1101;time=1494975603471;msg=The capture device input Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner had a failure while trying to start the recording of "Nightly Business Report" on WHYYDT on physical channel 12-12-1 at Tue 5/16 19:00.;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-0;VPhysicalChannel=12-12-1;VStartTime=1494975600000;VChannelName=WHYYDT;VTitle=Nightly Business Report;
pri=2;type=1103;time=1494975603552;msg=Your system may be running low on diskspace. SageTV will continue to record. If this message repeats you should check to make sure you are not completely out of diskspace.;end=1494975620382;rep=5;
pri=2;type=1100;time=1494975666614;msg=The device input "Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner" stopped producing data while recording "Nightly Business Report" on WHYYDT on physical channel 12-12-1. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-0;VPhysicalChannel=12-12-1;VChannelName=WHYYDT;VTitle=Nightly Business Report;
pri=1;type=1050;time=1495061101608;msg=The recording of "Larry King Now" on WYBEDT4 at Wed 5/17 18:29 was not performed because of conflicts recording on other tuners.;VStartTime=1495060140000;VChannelName=WYBEDT4;VTitle=Larry King Now;
pri=1;type=1050;time=1495665902666;msg=The recording of "Larry King Now" on WYBEDT4 at Wed 5/24 18:29 was not performed because of conflicts recording on other tuners.;VChannelName=WYBEDT4;VStartTime=1495664940000;VTitle=Larry King Now;
pri=1;type=1202;time=1495908253660;msg=An STV update from version '2011061301' to version '2013010701' is available.;VSTVUpdateFromVersion=2011061301;VIsSTVUpdate=true;VSTVUpdateToVersion=2013010701;
pri=3;type=1101;time=1496091600967;msg=The capture device input Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner had a failure while trying to start the recording of "Charlie Rose" on WHYYDT3 on physical channel 12-12-3 at Mon 5/29 17:00.;end=1496095186692;rep=42;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-1;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner;VPhysicalChannel=12-12-3;VChannelName=WHYYDT3;VStartTime=1496091600000;VTitle=Charlie Rose;VAiringID=11256606;
pri=2;type=1100;time=1496091676653;msg=The device input "Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner" stopped producing data while recording "Charlie Rose" on WHYYDT3 on physical channel 12-12-3. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-1;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner;VPhysicalChannel=12-12-3;VChannelName=WHYYDT3;VTitle=Charlie Rose;VAiringID=11256606;
pri=3;type=1100;time=1496091743298;msg=The device input "Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner" stopped producing data while recording "Charlie Rose" on WHYYDT3 on physical channel 12-12-3. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;end=1496095186692;rep=40;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-1;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner;VPhysicalChannel=12-12-3;VChannelName=WHYYDT3;VTitle=Charlie Rose;VAiringID=11256606;
pri=3;type=1102;time=1496095200013;msg=The device input "Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner" failed to record "Charlie Rose" on WHYYDT3 on physical channel 12-12-3 at Mon 5/29 17:00. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-1;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner;VPhysicalChannel=12-12-3;VChannelName=WHYYDT3;VStartTime=1496091600000;VTitle=Charlie Rose;VAiringID=11256606;
pri=3;type=1101;time=1496095200907;msg=The capture device input Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner had a failure while trying to start the recording of "PBS NewsHour" on WHYYDT on physical channel 12-12-1 at Mon 5/29 18:00.;end=1496095831643;rep=9;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner;VPhysicalChannel=12-12-1;VChannelName=WHYYDT;VStartTime=1496095200000;VTitle=PBS NewsHour;VAiringID=11229532;
pri=2;type=1100;time=1496095276667;msg=The device input "Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner" stopped producing data while recording "PBS NewsHour" on WHYYDT on physical channel 12-12-1. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner;VPhysicalChannel=12-12-1;VChannelName=WHYYDT;VTitle=PBS NewsHour;VAiringID=11229532;
pri=3;type=1100;time=1496095366673;msg=The device input "Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner" stopped producing data while recording "PBS NewsHour" on WHYYDT on physical channel 12-12-1. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;end=1496095922201;rep=8;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner;VPhysicalChannel=12-12-1;VChannelName=WHYYDT;VTitle=PBS NewsHour;VAiringID=11229532;
pri=3;type=1101;time=1496095580196;msg=The capture device input Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner had a failure while trying to start the recording of "PBS NewsHour" on WHYYDT on physical channel 12-12-1 at Mon 5/29 9:28.;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-1;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner;VPhysicalChannel=12-12-1;VChannelName=WHYYDT;VStartTime=1496064508600;VTitle=PBS NewsHour;VAiringID=11191695;
pri=2;type=1103;time=1496095831869;msg=Your system may be running low on diskspace. SageTV will continue to record. If this message repeats you should check to make sure you are not completely out of diskspace.;
pri=1;type=1202;time=1496345755121;msg=There is an update available of the plugin "Jetty Web Server" to version 2.3.0.17.;VPluginID=jetty;VPluginName=Jetty Web Server;VIsPluginUpdate=true;VVersion=2.3.0.17;
pri=1;type=1202;time=1496345755121;msg=There is an update available of the plugin "Gemstone for Default SageTV9 (previously Diamond)" to version 4.0301.;VPluginID=diamondstvi;VPluginName=Gemstone for Default SageTV9 (previously Diamond);VIsPluginUpdate=true;VVersion=4.0301;
pri=1;type=1202;time=1496345755121;msg=There is an update available of the plugin "sagex-services - SageTV Remote API Services" to version 9.0.0.8.;VPluginID=sagex-api-services;VPluginName=sagex-services - SageTV Remote API Services;VIsPluginUpdate=true;VVersion=9.0.0.8;
pri=3;type=1102;time=1496350190943;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner" failed to record "Frontline" on WHYYDT3 on physical channel 12-12-3 at Thu 6/1 16:00. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-1;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner;VPhysicalChannel=12-12-3;VChannelName=WHYYDT3;VStartTime=1496347200000;VTitle=Frontline;VAiringID=11311059;
pri=2;type=1100;time=1496350258680;msg=The device input "Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner" stopped producing data while recording "S.F.W." on WPHLDT3 on physical channel 17-17-3. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-1;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner;VPhysicalChannel=17-17-3;VChannelName=WPHLDT3;VTitle=S.F.W.;VAiringID=11311920;
pri=2;type=1100;time=1496350873773;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner" stopped producing data while recording "Charlie Rose" on WHYYDT3 on physical channel 12-12-3. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;end=1496352687392;rep=2;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner;VPhysicalChannel=12-12-3;VChannelName=WHYYDT3;VTitle=Charlie Rose;VAiringID=11311068;
pri=3;type=1100;time=1496350948760;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner" stopped producing data while recording "Charlie Rose" on WHYYDT3 on physical channel 12-12-3. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;end=1496354401210;rep=43;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner;VPhysicalChannel=12-12-3;VChannelName=WHYYDT3;VTitle=Charlie Rose;VAiringID=11311068;
pri=3;type=1102;time=1496352472459;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner" failed to record "Charlie Rose" on WHYYDT3 on physical channel  at Thu 6/1 17:00. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner;VPhysicalChannel=;VChannelName=WHYYDT3;VStartTime=1496350800000;VTitle=Charlie Rose;VAiringID=11311068;
pri=3;type=1102;time=1496352478346;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner" failed to record "Charlie Rose" on WHYYDT3 on physical channel  at Thu 6/1 17:00. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-1;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner;VPhysicalChannel=;VChannelName=WHYYDT3;VStartTime=1496350800000;VTitle=Charlie Rose;VAiringID=11311068;
pri=3;type=1102;time=1496352483427;msg=The device input "Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner" failed to record "Charlie Rose" on WHYYDT3 on physical channel  at Thu 6/1 17:00. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner;VPhysicalChannel=;VChannelName=WHYYDT3;VStartTime=1496350800000;VTitle=Charlie Rose;VAiringID=11311068;
pri=3;type=1102;time=1496352489217;msg=The device input "Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner" failed to record "Charlie Rose" on WHYYDT3 on physical channel  at Thu 6/1 17:00. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-1;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner;VPhysicalChannel=;VChannelName=WHYYDT3;VStartTime=1496350800000;VTitle=Charlie Rose;VAiringID=11311068;
pri=2;type=1100;time=1496353501555;msg=The device input "Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner" stopped producing data while recording "One on One With Steve Adubato" on WHYYDT on physical channel 12-12-1. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner;VPhysicalChannel=12-12-1;VChannelName=WHYYDT;VTitle=One on One With Steve Adubato;VAiringID=11333359;
pri=3;type=1100;time=1496353576554;msg=The device input "Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner" stopped producing data while recording "One on One With Steve Adubato" on WHYYDT on physical channel 12-12-1. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;end=1496353651624;rep=2;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner;VPhysicalChannel=12-12-1;VChannelName=WHYYDT;VTitle=One on One With Steve Adubato;VAiringID=11333359;
pri=3;type=1102;time=1496354401219;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner" failed to record "Charlie Rose" on WHYYDT3 on physical channel 12-12-3 at Thu 6/1 17:00. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner;VPhysicalChannel=12-12-3;VChannelName=WHYYDT3;VStartTime=1496350800000;VTitle=Charlie Rose;VAiringID=11311068;
pri=3;type=1100;time=1496354476723;msg=The device input "Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner" stopped producing data while recording "PBS NewsHour" on WHYYDT on physical channel 12-12-1. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;end=1496357552125;rep=42;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner;VPhysicalChannel=12-12-1;VChannelName=WHYYDT;VTitle=PBS NewsHour;VAiringID=11309821;
pri=3;type=1100;time=1496355856283;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner" stopped producing data while recording "Timed Record Recurs Daily" on WPVIDT on physical channel 6-6-1. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;end=1496357056542;rep=17;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner;VPhysicalChannel=6-6-1;VChannelName=WPVIDT;VTitle=Timed Record Recurs Daily;VAiringID=10805295;
pri=2;type=1100;time=1496356280740;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner" stopped producing data while recording "ABC World News Tonight With David Muir" on WPVIDT on physical channel 6-6-1. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-1;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner;VPhysicalChannel=6-6-1;VChannelName=WPVIDT;VTitle=ABC World News Tonight With David Muir;VAiringID=11309596;
pri=3;type=1100;time=1496356355775;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner" stopped producing data while recording "ABC World News Tonight With David Muir" on WPVIDT on physical channel 6-6-1. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;end=1496357555931;rep=17;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-1;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner;VPhysicalChannel=6-6-1;VChannelName=WPVIDT;VTitle=ABC World News Tonight With David Muir;VAiringID=11309596;
pri=3;type=1102;time=1496357105836;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner" failed to record "Timed Record Recurs Daily" on WPVIDT on physical channel 6-6-1 at Thu 6/1 18:23. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner;VPhysicalChannel=6-6-1;VChannelName=WPVIDT;VStartTime=1496355780000;VTitle=Timed Record Recurs Daily;VAiringID=10805295;
pri=2;type=1100;time=1496357417051;msg=The device input "Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner" stopped producing data while recording "Don Juan DeMarco" on WPMTDT3 on physical channel 47-43-3. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-1;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-1 Digital TV Tuner;VPhysicalChannel=47-43-3;VChannelName=WPMTDT3;VTitle=Don Juan DeMarco;VAiringID=11393413;
pri=3;type=1102;time=1496357605164;msg=The device input "Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner" failed to record "PBS NewsHour" on WHYYDT on physical channel 12-12-1 at Thu 6/1 18:00. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDevice=Silicondust HDHomeRun Tuner 10538870-0;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 10538870-0 Digital TV Tuner;VPhysicalChannel=12-12-1;VChannelName=WHYYDT;VStartTime=1496354400000;VTitle=PBS NewsHour;VAiringID=11309821;
pri=3;type=1102;time=1496357605181;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner" failed to record "ABC World News Tonight With David Muir" on WPVIDT on physical channel 6-6-1 at Thu 6/1 18:30. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-1;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner;VPhysicalChannel=6-6-1;VChannelName=WPVIDT;VStartTime=1496356200000;VTitle=ABC World News Tonight With David Muir;VAiringID=11309596;
pri=2;type=1100;time=1496357703297;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner" stopped producing data while recording "ABC World News Tonight With David Muir" on WPVIDT on physical channel 6-6-1. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-0;VPhysicalChannel=6-6-1;VChannelName=WPVIDT;VAiringID=11309596;VTitle=ABC World News Tonight With David Muir;
pri=3;type=1100;time=1496357766654;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner" stopped producing data while recording "ABC World News Tonight With David Muir" on WPVIDT on physical channel 6-6-1. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;end=1496357991615;rep=4;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-0;VPhysicalChannel=6-6-1;VChannelName=WPVIDT;VAiringID=11309596;VTitle=ABC World News Tonight With David Muir;
pri=3;type=1102;time=1496358000014;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner" failed to record "ABC World News Tonight With David Muir" on WPVIDT on physical channel 6-6-1 at Thu 6/1 18:30. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-0;VPhysicalChannel=6-6-1;VStartTime=1496356200000;VChannelName=WPVIDT;VAiringID=11309596;VTitle=ABC World News Tonight With David Muir;
pri=2;type=1100;time=1496358082094;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner" stopped producing data while recording "NOVA" on WHYYDT3 on physical channel 12-12-3. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-1;VPhysicalChannel=12-12-3;VChannelName=WHYYDT3;VAiringID=11311062;VTitle=NOVA;
pri=3;type=1100;time=1496358085361;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner" stopped producing data while recording "Nightly Business Report" on WHYYDT on physical channel 12-12-1. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;end=1496358460443;rep=6;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-0;VPhysicalChannel=12-12-1;VChannelName=WHYYDT;VAiringID=11309815;VTitle=Nightly Business Report;
pri=3;type=1100;time=1496358157118;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner" stopped producing data while recording "NOVA" on WHYYDT3 on physical channel 12-12-3. SageTV will try to reset the device. This may be caused by a channel that is no longer available.;end=1496358457156;rep=5;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-1;VPhysicalChannel=12-12-3;VChannelName=WHYYDT3;VAiringID=11311062;VTitle=NOVA;
pri=3;type=1102;time=1496358467784;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner" failed to record "NOVA" on WHYYDT3 on physical channel 12-12-3 at Thu 6/1 19:00. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-1 Digital TV Tuner;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-1;VPhysicalChannel=12-12-3;VStartTime=1496358000000;VChannelName=WHYYDT3;VAiringID=11311062;VTitle=NOVA;
pri=3;type=1102;time=1496358467795;msg=The device input "Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner" failed to record "Nightly Business Report" on WHYYDT on physical channel 12-12-1 at Thu 6/1 19:00. The TV source for this input may have become disconnected, powered off, has lost its signal, the channel is no longer available, or the device is failing.;VCaptureDeviceInput=Silicondust HDHomeRun Tuner 1015CB25-0 Digital TV Tuner;VCaptureDevice=Silicondust HDHomeRun Tuner 1015CB25-0;VPhysicalChannel=12-12-1;VStartTime=1496358000000;VChannelName=WHYYDT;VAiringID=11309815;VTitle=Nightly Business Report;
Attached Files
File Type: txt Sage.properties.txt (119.5 KB, 186 views)
__________________
Server: SageTV 9, Windows 10, i5 NUC
Clients: HD200*3 over Cat5e Ethernet + 1 slightly flakey HD 300 + 1 HD200 remote at another residence
Plugins: (none yet, looking for recommendations)
Storage: NetGear Ultra-6 NAS 10 TB total w/dual redundancy. Plus 5tb QNAP for RecordedTV.
Capture: 3 Silicon Dust HomeRun tuner boxes (6 tuners total)
Program Source: OTA antenna

Last edited by PeteCress; 06-02-2017 at 08:07 AM.
Reply With Quote
  #6  
Old 06-02-2017, 07:58 AM
Fuzzy's Avatar
Fuzzy Fuzzy is offline
SageTVaholic
 
Join Date: Sep 2005
Location: Jurupa Valley, CA
Posts: 9,957
sagetv_0.txt would be the most recent log file.
__________________
Buy Fuzzy a beer! (Fuzzy likes beer)

unRAID Server: i7-6700, 32GB RAM, Dual 128GB SSD cache and 13TB pool, with SageTVv9, openDCT, Logitech Media Server and Plex Media Server each in Dockers.
Sources: HRHR Prime with Charter CableCard. HDHR-US for OTA.
Primary Client: HD-300 through XBoxOne in Living Room, Samsung HLT-6189S
Other Clients: Mi Box in Master Bedroom, HD-200 in kids room
Reply With Quote
  #7  
Old 06-02-2017, 08:03 AM
Fuzzy's Avatar
Fuzzy Fuzzy is offline
SageTVaholic
 
Join Date: Sep 2005
Location: Jurupa Valley, CA
Posts: 9,957
In your properties file, it looks like 4 of your 6 tuners are already configured and assigned to a lineup "Local Over the Air Broadcast - 19301 (sdepg)"
__________________
Buy Fuzzy a beer! (Fuzzy likes beer)

unRAID Server: i7-6700, 32GB RAM, Dual 128GB SSD cache and 13TB pool, with SageTVv9, openDCT, Logitech Media Server and Plex Media Server each in Dockers.
Sources: HRHR Prime with Charter CableCard. HDHR-US for OTA.
Primary Client: HD-300 through XBoxOne in Living Room, Samsung HLT-6189S
Other Clients: Mi Box in Master Bedroom, HD-200 in kids room
Reply With Quote
  #8  
Old 06-02-2017, 08:08 AM
JustFred JustFred is offline
Sage Expert
 
Join Date: May 2015
Location: Sunnyvale, Ca
Posts: 572
Quote:
Originally Posted by Fuzzy View Post
There is no HDHR service, if he's accessing them directly from Sage (as opposed to using OpenDCT).
Thanks for the correction... I was thinking of the SageDCT / OpenDCT service which has to be started prior to the Sage service. Although the HDHR service does exist, it isn't required for Sage.
__________________
System #1: Win7-64, I7-920, 8 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HDHR-US (1st gen white) tuners. HD-200.
System #2: Win7-64, I7-920, 8 GB mem, 4TB HD. Java 1.8.0_131. Sage v9.1.6.747. ClearQAM: 2x HDHR3-US tuners. HD-200.
System #3: Win7-64, I7-920, 12 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HVR2250; Spectrum Cable via HDPVR & USB-UIRT. 3x HD-200.
Reply With Quote
  #9  
Old 06-02-2017, 09:56 AM
PeteCress's Avatar
PeteCress PeteCress is offline
Sage Fanatic
 
Join Date: Jan 2009
Location: Paoli, PA - USA, AKA "The Navel Of The Universe"
Posts: 843
Quote:
Originally Posted by Fuzzy View Post
In your properties file, it looks like 4 of your 6 tuners are already configured and assigned to a lineup "Local Over the Air Broadcast - 19301 (sdepg)"
Yeah - the name on my SchedulesDirect.org account page is "Local Broadcast Listings - Antenna (19301)".

But the Sage UI says there are no tuners - period....

Maybe I will try deleting that part of the props file and see if it helps.
__________________
Server: SageTV 9, Windows 10, i5 NUC
Clients: HD200*3 over Cat5e Ethernet + 1 slightly flakey HD 300 + 1 HD200 remote at another residence
Plugins: (none yet, looking for recommendations)
Storage: NetGear Ultra-6 NAS 10 TB total w/dual redundancy. Plus 5tb QNAP for RecordedTV.
Capture: 3 Silicon Dust HomeRun tuner boxes (6 tuners total)
Program Source: OTA antenna
Reply With Quote
  #10  
Old 06-02-2017, 11:10 AM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
 
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,657
Like Fuzzy suggested, sagetv_0.txt would give us the best picture of what might be happening. If this is Windows and it sounds like it is, SageTV uses the HDHomeRun BDA driver to talk to the HDHomeRun's, so it's no different to SageTV from a PCIe card in your computer and it doesn't treat them any different. SageTV has no knowledge of it being a accessed over the network; it just knows it's a BDA capture device. My only guess without see a log would be that the HDHomeRun software isn't set to SageTV and the drivers are in a mode that SageTV can't work with.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.

Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #11  
Old 06-02-2017, 12:27 PM
PeteCress's Avatar
PeteCress PeteCress is offline
Sage Fanatic
 
Join Date: Jan 2009
Location: Paoli, PA - USA, AKA "The Navel Of The Universe"
Posts: 843
Quote:
Originally Posted by PeteCress View Post
Yeah - the name on my SchedulesDirect.org account page is "Local Broadcast Listings - Antenna (19301)".

But the Sage UI says there are no tuners - period....

Maybe I will try deleting that part of the props file and see if it helps.
No-go. I killed the service, deleted everything that started with mmc/encoders/, and re-started - but no change.

Any idea how SageTV detects those tuners? .... I am starting to wonder about some IP address thing..... OTOH, it was finding them with no problem before this issue surfaced.
__________________
Server: SageTV 9, Windows 10, i5 NUC
Clients: HD200*3 over Cat5e Ethernet + 1 slightly flakey HD 300 + 1 HD200 remote at another residence
Plugins: (none yet, looking for recommendations)
Storage: NetGear Ultra-6 NAS 10 TB total w/dual redundancy. Plus 5tb QNAP for RecordedTV.
Capture: 3 Silicon Dust HomeRun tuner boxes (6 tuners total)
Program Source: OTA antenna
Reply With Quote
  #12  
Old 06-02-2017, 12:36 PM
PeteCress's Avatar
PeteCress PeteCress is offline
Sage Fanatic
 
Join Date: Jan 2009
Location: Paoli, PA - USA, AKA "The Navel Of The Universe"
Posts: 843
Quote:
Originally Posted by Fuzzy View Post
sagetv_0.txt would be the most recent log file.
Again, the forum will not allow the file bco size.

Here's a partial - but all that was deleted were many iterations of the "...Could not resolve aliased person..." error.
Attached Files
File Type: txt sagetv_0.partial.txt (370.4 KB, 150 views)
__________________
Server: SageTV 9, Windows 10, i5 NUC
Clients: HD200*3 over Cat5e Ethernet + 1 slightly flakey HD 300 + 1 HD200 remote at another residence
Plugins: (none yet, looking for recommendations)
Storage: NetGear Ultra-6 NAS 10 TB total w/dual redundancy. Plus 5tb QNAP for RecordedTV.
Capture: 3 Silicon Dust HomeRun tuner boxes (6 tuners total)
Program Source: OTA antenna
Reply With Quote
  #13  
Old 06-02-2017, 12:43 PM
Fuzzy's Avatar
Fuzzy Fuzzy is offline
SageTVaholic
 
Join Date: Sep 2005
Location: Jurupa Valley, CA
Posts: 9,957
Quote:
Originally Posted by PeteCress View Post
Again, the forum will not allow the file bco size.

Here's a partial - but all that was deleted were many iterations of the "...Could not resolve aliased person..." error.
Zip the log file up and attack the zip file. log files compress very well, and can easily be attached then.
__________________
Buy Fuzzy a beer! (Fuzzy likes beer)

unRAID Server: i7-6700, 32GB RAM, Dual 128GB SSD cache and 13TB pool, with SageTVv9, openDCT, Logitech Media Server and Plex Media Server each in Dockers.
Sources: HRHR Prime with Charter CableCard. HDHR-US for OTA.
Primary Client: HD-300 through XBoxOne in Living Room, Samsung HLT-6189S
Other Clients: Mi Box in Master Bedroom, HD-200 in kids room
Reply With Quote
  #14  
Old 06-02-2017, 01:11 PM
Fuzzy's Avatar
Fuzzy Fuzzy is offline
SageTVaholic
 
Join Date: Sep 2005
Location: Jurupa Valley, CA
Posts: 9,957
Quote:
Originally Posted by PeteCress View Post
Again, the forum will not allow the file bco size.

Here's a partial - but all that was deleted were many iterations of the "...Could not resolve aliased person..." error.
It looks like an issue with the HDHomeRun's directshow drivers. Sage is detecting the devices, but then when it goes to check the devices capabilities, it is returning that the device doesn't exist. I don't know what all you've tried, but it might be worth uninstalling the SiliconDust software and drivers, rebooting, and reinstalling them, and see if that changes.
__________________
Buy Fuzzy a beer! (Fuzzy likes beer)

unRAID Server: i7-6700, 32GB RAM, Dual 128GB SSD cache and 13TB pool, with SageTVv9, openDCT, Logitech Media Server and Plex Media Server each in Dockers.
Sources: HRHR Prime with Charter CableCard. HDHR-US for OTA.
Primary Client: HD-300 through XBoxOne in Living Room, Samsung HLT-6189S
Other Clients: Mi Box in Master Bedroom, HD-200 in kids room
Reply With Quote
  #15  
Old 06-02-2017, 01:18 PM
PeteCress's Avatar
PeteCress PeteCress is offline
Sage Fanatic
 
Join Date: Jan 2009
Location: Paoli, PA - USA, AKA "The Navel Of The Universe"
Posts: 843
Quote:
Originally Posted by EnterNoEscape View Post
If this is Windows and it sounds like it is, SageTV uses the HDHomeRun BDA driver to talk to the HDHomeRun's, so it's no different to SageTV from a PCIe card in your computer and it doesn't treat them any different. SageTV has no knowledge of it being a accessed over the network; it just knows it's a BDA capture device.
We have a winner!!!

I went into HDHomeRun Setup | Advanced | Support | Repair/Reinstall Windows components and clicked "Repair" - after which SageTV recognized the tuners.

Re-added all 4 of my tuners and we are back in business.

Whew!!!!

Thanks to all.
__________________
Server: SageTV 9, Windows 10, i5 NUC
Clients: HD200*3 over Cat5e Ethernet + 1 slightly flakey HD 300 + 1 HD200 remote at another residence
Plugins: (none yet, looking for recommendations)
Storage: NetGear Ultra-6 NAS 10 TB total w/dual redundancy. Plus 5tb QNAP for RecordedTV.
Capture: 3 Silicon Dust HomeRun tuner boxes (6 tuners total)
Program Source: OTA antenna
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
HDHomeRun "No video capture devices found" WHS charliescott Hardware Support 11 11-14-2009 10:08 AM
Get "No Video Capture Devices were found" for Mac MyTV PVR SapAuthor SageTV Mac Edition 1 03-16-2008 04:32 PM
HDHomeRun - no capture devices found jvalj Hardware Support 0 07-19-2007 12:15 PM
No Video Capture Devices Found mike1961 Hardware Support 6 01-23-2007 09:12 PM
No video capture devices found pvr150 SageTV v6 obperryo SageTV Linux 1 01-08-2007 10:01 AM


All times are GMT -6. The time now is 10:58 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.