DShowCapture.dll 7.0.18 RC2 vs. FloppyDTV C/CI (DVB-C) = ERROR (-2,0x80004005)

[voidpt]

Have had a very stable 7.0 installation lately. But my upgrade from 7.0.17 RC1 to 7.0.18 RC2 changed that. Guess I should be happy, finally something to problemsolve again

Long story short. After upgrade to .18 RC2. Following dialog box in SageTV interface when trying to tune:
» There was a Capture Error in playback. Details:
» ERROR (-2,0x80004005): There was a problem
» using a SageTV component. Please re-install
» SageTV application.

Had read the release notes already. A few captured my interest:

Windows Updates
1. Enabled support for configuring both the DVB-S and DVB-T inputs on the HVR-4000 on Windows. Previously only one format or the other could be used.
6. Fixed support for Hauppauge HVR-930C
7. Fixes for DVBLogic support

After getting hold of the DShowCapture.dll for .17 RC1 and switching between that and the one for .18 RC2. Sure enough. Ok / Fail / Ok / Fail. So .18 RC2 do not like my FloppyDTV. Before I ask SageTV to make them friends again. Anybody else get this problem, in any form ? Just wondering if it's related to FireDTV/FloppyDTV, DVB-C or DVB in general.

BTW: Look signature below for info about my setup.

[Bacon2002]

Hi,

Same problem here, I am running Windows 7 64 bit and lots of tuners including a FireDTV-S2 which I expect is the same problem tuner giving me the same error:-

error (-2,0x80004005)

Have you logged a support request? For info I just logged a support request, will let you know how it goes.

Thanks,

David

[wubdich]

... same error with Technotrend TT-budget S2-3200

[voidpt]

Originally Posted by Bacon2002

Have you logged a support request? For info I just logged a support request, will let you know how it goes.

Nope. Not yet. Was just wondering if I was alone in this. But after two fast replies. I guess it is a general problem. Thanks for keeping us updated. If needed I'll do a support request myself. You could also point them to my debug logging below, might contain something useful.

Have now also done a debug logging just to try to isolate where the error happens. Here is a trimmed edition of part of log with .18 RC2 DLL (fail):

[MainMsg@] setupEncoding0 called for 91423632 'FireDTV BDA Receiver DVBC-0' (ver 1.0)
[MainMsg@] Connecting capture Filters. (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#5604002600871200#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{cb365890-165f-11d0-a195-0020afd156e4})
[MainMsg@] try connect BDA tuner 'FireDTV BDA Tuner DVBC' (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#5604002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}) to Cable
[MainMsg@] checking mfr vendor, '' '' (class:2, 3)
[MainMsg@] Can't connect Network Provider to Tuner Filter (Cable) 
[MainMsg@] try connect BDA tuner 'FireDTV BDA Tuner DVBC' (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#6c04002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}) to Cable
[MainMsg@] checking mfr vendor, '' '' (class:2, 3)
[MainMsg@] Can't connect Network Provider to Tuner Filter (Cable) 
[MainMsg@] not found BDA connectable tuner for DBA capture 
[MainMsg@] Exception from line: 2666
[MainMsg@] Built:sage.EncodingException: ERROR (-2,0x80004005): There was a problem using a SageTV component. Please re-install the SageTV application.
[MainMsg@] Tuner Plugin ctrl created 
[MainMsg@] Tuner Plugin not setup in registery 'SOFTWARE\Frey Technologies\Common\TunerPlugin' 
[MainMsg@] Encoding to file \\servername\capture\Beatforbeat-265819-0.mpg

Trimmed edition of part of log with .17 RC1 DLL (ok):

[MainMsg@] setupEncoding0 called for 92769944 'FireDTV BDA Receiver DVBC-1' (ver 1.0)
[MainMsg@] Connecting capture Filters. (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#6c04002600871200#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{cb365890-165f-11d0-a195-0020afd156e4})
[MainMsg@] Network not specified, Try Network type ATSC
[MainMsg@] Setup ATSC BDATuningSpace (3  0)
[MainMsg@] QAM:Got capture drv info for QAM mfg:'Digital Everywhere' FireDTV BDA Receiver DVBC-1
[MainMsg@] QAM: not initailze FireDTV BDA Receiver DVBC-1
[MainMsg@] LoadTuneTable ATSC
[MainMsg@] Failed loading frq file FireDTV BDA Receiver DVBC-1-ATSC.frq
[MainMsg@] try connect BDA tuner 'FireDTV BDA Tuner DVBC' (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#5604002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}) to ATSC
[MainMsg@] checking mfr vendor, '' '' (class:2, 3)
[MainMsg@] Can't connect Network Provider to Tuner Filter (ATSC) 
[MainMsg@] try connect BDA tuner 'FireDTV BDA Tuner DVBC' (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#6c04002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}) to ATSC
[MainMsg@] checking mfr vendor, '' '' (class:2, 3)
[MainMsg@] Can't connect Network Provider to Tuner Filter (ATSC) 
[MainMsg@] Release ATSC BDATuningSpace
[MainMsg@] Setup DVB-T BDATuningSpace (4  0)
[MainMsg@] LoadTuneTable DVB-T
[MainMsg@] Failed loading frq file FireDTV BDA Receiver DVBC-1-DVB-T.frq
[MainMsg@] Try Network type DVB-T (Cable)
[MainMsg@] try connect BDA tuner 'FireDTV BDA Tuner DVBC' (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#5604002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}) to DVB-T
[MainMsg@] checking mfr vendor, '' '' (class:2, 3)
[MainMsg@] Can't connect Network Provider to Tuner Filter (DVB-T) 
[MainMsg@] try connect BDA tuner 'FireDTV BDA Tuner DVBC' (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#6c04002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}) to DVB-T
[MainMsg@] checking mfr vendor, '' '' (class:2, 3)
[MainMsg@] Can't connect Network Provider to Tuner Filter (DVB-T) 
[MainMsg@] Release DVB-T BDATuningSpace
[MainMsg@] Setup DVB-C BDATuningSpace (5  0)
[MainMsg@] LoadTuneTable DVB-C
[MainMsg@] Try Network type DVB-C (Cable)
[MainMsg@] try connect BDA tuner 'FireDTV BDA Tuner DVBC' (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#5604002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}) to DVB-C
[MainMsg@] checking mfr vendor, '' '' (class:2, 3)
[MainMsg@] Filters medium not matched {D102C41F-7FA1-4842-A0C8-DC41176EC844}-0x0 {D102C41F-7FA1-4842-A0C8-DC41176EC844}-0x1.
[MainMsg@] Filter Medium isn't matched (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#5604002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}).
[MainMsg@] Capture filter input pin mediatype clsid ({00000000-0000-0000-0000-000000000000}).
[MainMsg@] Can't connect Tuner to Capture Filter (DVB-C).
[MainMsg@] try connect BDA tuner 'FireDTV BDA Tuner DVBC' (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#6c04002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}) to DVB-C
[MainMsg@] checking mfr vendor, '' '' (class:2, 3)
[MainMsg@] Failed to get Pin-1 to map pid hr=0x80004005 
[MainMsg@] Capture filters are connected
[MainMsg@] QAM:Got capture drv info for QAM mfg:'Digital Everywhere' FireDTV BDA Receiver DVBC-1
[MainMsg@] CAM:Got capture drv info for CAM vendorID:'' mfg:'Digital Everywhere' FireDTV BDA Receiver DVBC-1
[MainMsg@] CAM:Initialize (tag:FIREDTV ) CAM/CI ctrl block (ver 1.3) FireDTV BDA Receiver DVBC-1 0x5878e98 0x0 env:0x5050118
[MainMsg@] CAM:Check FireDTV CI Present, status: 0x3a  FireDTV BDA Receiver DVBC-1
[MainMsg@] CAM:Open CAM/CI device FireDTV BDA Receiver DVBC-1
[MainMsg@] CAM:FireDTV CAM/CI is open,  FireDTV BDA Receiver DVBC-1
[MainMsg@] TS Splitter passThrus pin is enabled.
[MainMsg@] Tuner Plugin ctrl created 
[MainMsg@] Tuner Plugin not setup in registery 'SOFTWARE\Frey Technologies\Common\TunerPlugin' 
[MainMsg@] Encoding to file \\servername\capture\Beatforbeat-265819-0.mpg

[Bacon2002]

Hi,

In my support request I also included a link to this forum post so hopefully the SageTV guys should see it.

I have downgraded back to 7.1.7 so hopefully your log will be enough?

Ta,

David

[donkey]

Here is an update for the problem the wrong TV Type (Cable) was used
http://download.sage.tv/users/qian/7...howCapture.dll
File version: 3.0.0.34

Note: If you have ATSC (Digital OTA) tuners, do not use this file; wait for the next update.


Qian

[jarredduq]

Can you update this link? Somehow the shortened version was posted.

[donkey]

I tested, it works.

Qian

[Rico66]

Just to let you know, this updated dll breaks ATSC playback for me (on my Avermedia M780). So you really should use it only, if you had problems before (I didn't). Otherwise I'd recommend to stay away from it ...

[voidpt]

Originally Posted by donkey

Here is an update for the problem ... Qian

Thanks. The new DShowCapture.dll v7.0.19.1 solved my FloppyDTV C/CI (DVB-C) problem. Got the following successful log (trimmed):

[MainMsg@] setupEncoding0 called for 94300168 'FireDTV BDA Receiver DVBC-0' (ver 1.0)
[MainMsg@] Connecting capture Filters. (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#5604002600871200#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{cb365890-165f-11d0-a195-0020afd156e4})
[MainMsg@] Network not specified, Try Network type ATSC
[MainMsg@] Setup ATSC BDATuningSpace (3  0)
[MainMsg@] QAM:Got capture drv info for QAM mfg:'Digital Everywhere' FireDTV BDA Receiver DVBC-0
[MainMsg@] QAM: not initailze FireDTV BDA Receiver DVBC-0
[MainMsg@] LoadTuneTable ATSC
[MainMsg@] Failed loading frq file FireDTV BDA Receiver DVBC-0-ATSC.frq
[MainMsg@] try connect BDA tuner 'FireDTV BDA Tuner DVBC' (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#5604002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}) to ATSC
[MainMsg@] checking mfr vendor, '' '' (class:2, 3)
[MainMsg@] Can't connect Network Provider to Tuner Filter (ATSC) 
[MainMsg@] try connect BDA tuner 'FireDTV BDA Tuner DVBC' (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#6c04002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}) to ATSC
[MainMsg@] checking mfr vendor, '' '' (class:2, 3)
[MainMsg@] Can't connect Network Provider to Tuner Filter (ATSC) 
[MainMsg@] Release ATSC BDATuningSpace
[MainMsg@] Setup DVB-T BDATuningSpace (4  0)
[MainMsg@] LoadTuneTable DVB-T
[MainMsg@] Failed loading frq file FireDTV BDA Receiver DVBC-0-DVB-T.frq
[MainMsg@] Try Network type DVB-T (Cable)
[MainMsg@] try connect BDA tuner 'FireDTV BDA Tuner DVBC' (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#5604002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}) to DVB-T
[MainMsg@] checking mfr vendor, '' '' (class:2, 3)
[MainMsg@] Can't connect Network Provider to Tuner Filter (DVB-T) 
[MainMsg@] try connect BDA tuner 'FireDTV BDA Tuner DVBC' (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#6c04002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}) to DVB-T
[MainMsg@] checking mfr vendor, '' '' (class:2, 3)
[MainMsg@] Can't connect Network Provider to Tuner Filter (DVB-T) 
[MainMsg@] Release DVB-T BDATuningSpace
[MainMsg@] Setup DVB-C BDATuningSpace (5  0)
[MainMsg@] LoadTuneTable DVB-C
[MainMsg@] Try Network type DVB-C (Cable)
[MainMsg@] try connect BDA tuner 'FireDTV BDA Tuner DVBC' (@device:pnp:\\?\avc#digital_everywhere&firedtv_c#ci&typ_5&id_0#5604002600871200#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{db365890-165f-11d0-a195-0020afd156e4}) to DVB-C
[MainMsg@] checking mfr vendor, '' '' (class:2, 3)
[MainMsg@] Failed to get Pin-1 to map pid hr=0x80004005 
[MainMsg@] Capture filters are connected
[MainMsg@] QAM:Got capture drv info for QAM mfg:'Digital Everywhere' FireDTV BDA Receiver DVBC-0
[MainMsg@] CAM:Got capture drv info for CAM vendorID:'' mfg:'Digital Everywhere' FireDTV BDA Receiver DVBC-0
[MainMsg@] CAM:Initialize (tag:FIREDTV ) CAM/CI ctrl block (ver 1.3) FireDTV BDA Receiver DVBC-0 0x59ee808 0x0 env:0x50bf118
[MainMsg@] CAM:Check FireDTV CI Present, status: 0x3a  FireDTV BDA Receiver DVBC-0
[MainMsg@] CAM:Open CAM/CI device FireDTV BDA Receiver DVBC-0
[MainMsg@] CAM:FireDTV CAM/CI is open,  FireDTV BDA Receiver DVBC-0
[MainMsg@] TS Splitter passThrus pin is enabled.
[MainMsg@] Tuner Plugin ctrl created 
[MainMsg@] Tuner Plugin not setup in registery 'SOFTWARE\Frey Technologies\Common\TunerPlugin' 
[MainMsg@] Encoding to file \\servername\capture\Deukjente-271607-0.mpg

[bs4free]

Just had the same issue on PVR 2250 QAM reverted to my backed up copy of that .dll and fixed it right away thank you so much for finding out that was the issue.

[archie658]

Yes, FloppyDTV (DVB-C) is fixed, but my DVB-T tuners (PCI and USB) are still broken! 7.0.17 rc1 is fine, with both kind of tuners.

[Bacon2002]

Hi,

I also reverted back to 7.0.17 as my FireDTV-S2 works at fist with the new .dll however it stops respondings after a few channel changes.

Hopefully this will be fixed in the next beta.

David

[donkey]

I just updated the patch
http://download.sage.tv/users/qian/7...howCapture.dll (file version 3.0.36).
Please help by testing the new DLL. We want to solve all tuner related problems before the next beta.

Qian

[voidpt]

Originally Posted by donkey

... (file version 3.0.36). Help test, ...

Tested newest DShowCapture.dll v7.0.19.1 / 3.0.36, just to be sure. My FloppyDTV C/CI (DVB-C) still works fine.

[archie658]

Originally Posted by donkey

I just updated the patch
http://download.sage.tv/users/qian/7...howCapture.dll (file version 3.0.36).
Please help by testing the new DLL. We want to solve all tuner related problems before the next beta.

Tested on the XP server: DVB-C (FloppyDTV) and DVB-T (USB) are both working now! I'll check the Win7_64 server later, 'cause it's recording Spooks right now.

BTW any change SageTV will support the fairly new Terratec H7, an external hybrid DVB-C/T tuner (USB) with CAM?

[jptheripper]

once i download dll do i have to manually register? or just start and stop sage?

[voidpt]

Originally Posted by jptheripper

once i download dll do i have to manually register? or just start and stop sage?

I did not re-register. Only stopped SageTV service, backup'ed existing, copied new. Started SageTV service again. Per Opus4 updated post, this is only thing needed.

[Bacon2002]

Hi,

I'll check the new one tonight.

Thanks,

David