HD200 sage.PlaybackException after upgrade

[joshuad156]

Had v6.6 working great on my WHS server. I don't have any local clients other than a pair of HD200s.

Here is what I did.
1) I stopped SageTV service.
2) I backed-up the SageTV folder.
3) Ran the v7 beta WHS installer.
4) Powered my HD200 into Standalone mode and downloaded the Beta firmware.
5) Once rebooted into Extender mode, I had to load the v7 STV to get the new interface.

At this point, anything I try to play back (Mpeg2 recordings, Mp4 recordings, DVD folders) results in a sage.PlaybackException message. This currently only happens on one of my HD200s. My second HD200 seems to be working just fine, so I don't think it's a problem with the server.

I've tried bouncing back and forth between the 2 firmwares, but I can't seem to get it to work now. Anyone have any ideas of what to try to make my main HD200 work again? This is really frustrating.

[maninblack_30]

I've had this happen too, but it only happened once each time I upgraded, and I only have 1 HD200.
What I did was shutdown the sage machine, unplug the power to the HD200 and unplug the network cable, start the sage machine,plug in the HD200's network cable then power up the HD200 BUT stop it autoconnecting to the server, let it load to the standalone menu, then browse for the server, then connect.
It only seems to need to be done once.
Let me know if it helps.

Fraser

[joshuad156]

WOW that totally fixed it THANK YOU!

First thing I tried was to stop autoconnect, go to SERVERS, and reconnect to my server. That's all it took!

Now if I can get my other v7 woes fixed I'll be a happy camper!