Pronto ccf

edgley · #1 10-13-2004, 07:54 AM

I have been searching and reading, but:
All references say go to remotecentral to get the codes to put into my ccf.
RC doesnt have any sage ccf.

Does someone have one that I could get a copy of please?
I have tried learning the codes and that doesnt work.

Thanks,

Simon.

Jere_Jones · #2 10-13-2004, 08:14 AM

Which pronto do you have?

edgley · #3 10-13-2004, 08:26 AM

a 940.
Thats one of the B&W ones

lovingHDTV · #4 10-13-2004, 10:16 AM

I've been looking for one of these also. If anyone has one out there.

IKK · #5 10-13-2004, 10:24 AM

I am familiar with the TSU 1000 and TSU 2000. I have the 2000. What are you using to learn the codes. The best way I have found is to buy a IR keyboard. and to teach it those codes. here is the link to the liteon keyboard keys on remote central. after you download the ccf files you will need to create your buttons and assign the code to it. Then you will need to teach sage each of those codes.
http://www.remotecentral.com/cgi-bin...r=&dv=&dt=&so=

Opus4 · #6 10-13-2004, 10:42 AM

edgley: When you ask for a SageTV CCF, do you mean one to use the Hauppauge remote, or what? What codes are you trying to learn? What IR receiver are you using?

_IF_ you are using the Hauppauge remote/receiver...

The nice thing about the Pronto software that I noticed when I looked at it a while back, is that it can be directly programmed to use the RC5 protocol that the Hauppauge remote uses. You can program the silver remote's codes directly using system code 31 + the command codes listed in the [HCWPVR] section of irremote.ini.

But, for most usefulness, you can ignore those codes & program any RC5 code you want & then configure irremote.ini to use those codes, so you can use more buttons than the Hauppauge remote contains & have access to any SageTV command you want.

- Andy

edgley · #7 10-13-2004, 05:25 PM

Hi Opus,

I am using a USB_IRT thingies.
I here mention of this RC5 code set, but I can not find it.

For pure ease, I just wanted to capture the codes of the silver remote, thats all I really need. I dont understand why I can not do it direct into the pronto.

KJake · #8 01-09-2005, 09:59 AM

These are the RC5 Pronto formatted HEX codes.
There are not assigned to anything on the Hauppauge remote, but the IR H/W and S/W will recognize them. Just assign a bunk key press to CODE0= in the [SageTV] section and then restart the IR software...go into Sage and then remap that programmed key to _anything_ you want!

Code:

CODE0  = 5000 0000 0000 0001 001A 0000
CODE1  = 5000 0000 0000 0001 001A 0001
CODE2  = 5000 0000 0000 0001 001A 0002
CODE3  = 5000 0000 0000 0001 001A 0003
CODE4  = 5000 0000 0000 0001 001A 0004
CODE5  = 5000 0000 0000 0001 001A 0005
CODE6  = 5000 0000 0000 0001 001A 0006
CODE7  = 5000 0000 0000 0001 001A 0007
CODE8  = 5000 0000 0000 0001 001A 0008
CODE9  = 5000 0000 0000 0001 001A 0009

CODE10 = 5000 0000 0000 0001 001A 000A
CODE11 = 5000 0000 0000 0001 001A 000B
CODE12 = 5000 0000 0000 0001 001A 000C
CODE13 = 5000 0000 0000 0001 001A 000D
CODE14 = 5000 0000 0000 0001 001A 000E
CODE15 = 5000 0000 0000 0001 001A 000F
CODE16 = 5000 0000 0000 0001 001A 0010
CODE17 = 5000 0000 0000 0001 001A 0011
CODE18 = 5000 0000 0000 0001 001A 0012
CODE19 = 5000 0000 0000 0001 001A 0013

CODE20 = 5000 0000 0000 0001 001A 0014
CODE21 = 5000 0000 0000 0001 001A 0015
CODE22 = 5000 0000 0000 0001 001A 0016
CODE23 = 5000 0000 0000 0001 001A 0017
CODE24 = 5000 0000 0000 0001 001A 0018
CODE25 = 5000 0000 0000 0001 001A 0019
CODE26 = 5000 0000 0000 0001 001A 001A
CODE27 = 5000 0000 0000 0001 001A 001B
CODE28 = 5000 0000 0000 0001 001A 001C
CODE29 = 5000 0000 0000 0001 001A 001D

CODE30 = 5000 0000 0000 0001 001A 001E
CODE31 = 5000 0000 0000 0001 001A 001F
CODE32 = 5000 0000 0000 0001 001A 0020
CODE33 = 5000 0000 0000 0001 001A 0021
CODE34 = 5000 0000 0000 0001 001A 0022
CODE35 = 5000 0000 0000 0001 001A 0023
CODE36 = 5000 0000 0000 0001 001A 0024
CODE37 = 5000 0000 0000 0001 001A 0025
CODE38 = 5000 0000 0000 0001 001A 0026
CODE39 = 5000 0000 0000 0001 001A 0027

CODE40 = 5000 0000 0000 0001 001A 0028
CODE41 = 5000 0000 0000 0001 001A 0029
CODE42 = 5000 0000 0000 0001 001A 002A
CODE43 = 5000 0000 0000 0001 001A 002B
CODE44 = 5000 0000 0000 0001 001A 002C
CODE45 = 5000 0000 0000 0001 001A 002D
CODE46 = 5000 0000 0000 0001 001A 002E
CODE47 = 5000 0000 0000 0001 001A 002F
CODE48 = 5000 0000 0000 0001 001A 0030
CODE49 = 5000 0000 0000 0001 001A 0031

CODE50 = 5000 0000 0000 0001 001A 0032
CODE51 = 5000 0000 0000 0001 001A 0033
CODE52 = 5000 0000 0000 0001 001A 0034
CODE53 = 5000 0000 0000 0001 001A 0035
CODE54 = 5000 0000 0000 0001 001A 0036
CODE55 = 5000 0000 0000 0001 001A 0037
CODE56 = 5000 0000 0000 0001 001A 0038
CODE57 = 5000 0000 0000 0001 001A 0039
CODE58 = 5000 0000 0000 0001 001A 003A
CODE59 = 5000 0000 0000 0001 001A 003B

CODE60 = 5000 0000 0000 0001 001A 003c
CODE61 = 5000 0000 0000 0001 001A 003D
CODE62 = 5000 0000 0000 0001 001A 003E
CODE63 = 5000 0000 0000 0001 001A 003F

KJake · #9 01-09-2005, 10:02 AM

Quote:

Originally Posted by edgley

For pure ease, I just wanted to capture the codes of the silver remote, thats all I really need. I dont understand why I can not do it direct into the pronto.

Do you still need the hauppage remote codes for your pronto?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)