Xfinity X1 and USB-UIRT working?

[KAZUNA]

Anyone using USB-UIRT to IR control the channel on Xfinity X1 TV boxes?

Could you share the IR file?

How reliable is the IR control? 100%, 95%?

As far as I tested XG2, XG1-P and XG1-A at my friends house, they all seem using the same IR code because one IR remote can control them all.

Now I'm considering to get USB-UIRT and either XG2 or XG1 to IR control the channel.
But I cannot find a post mentioning for USB-UIRT controling Xfinity X1 TV boxes.

I really appreciate if you can share your experience with using USB-UIRT to channel control Xfinity X1.

[JustFred]

Although I'm not currently doing so, my experience has been that all of Comcast's STBs use the same IR control codes. Using Sage's built-in IR codeset for the Motorola DCT-3200 has worked just fine. Reliability of the IR itself has been nearly 100%.

However.... I strongly recommend using a CableCard and an HDHomeRun Prime tuner instead of the STB for video capture. Reasons:

1) This approach doesn't require you to (endlessly) manually update the channel #s as Comcast shuffles programming between channels. Don't under-estimate the hassle and grief this will cause. With a CC, it's taken care of automagically.

2) Much more reliable. Don't have to deal with the STB going into standby mode (or reboot) at inopportune times.

3) Less hardware required. A single HDHR Prime can capture 3 simultaneous video streams directly. No USB-UIRT and video capture device(s) needed.

4) Cheaper. Renting a CableCard from Comcast typically only costs $3/month (recently reduced to free in my area) instead of $7-$10/mo for a DTA or STB.

[trk2]

I want to echo JustFred's comments. Go cable card with Comcast service. The reliability and quality with OpenDCT in Sage can't be beat. The first cable card is free and Comcast is very good about making sure all non-premium channels have no copy restrictions. You may still need a cable box for premium channels.

[KAZUNA]

Originally Posted by JustFred

Although I'm not currently doing so, my experience has been that all of Comcast's STBs use the same IR control codes. Using Sage's built-in IR codeset for the Motorola DCT-3200 has worked just fine. Reliability of the IR itself has been nearly 100%.

Unfortunately, Comcast changed the IR code for Xfinity X1 and I'm looking for the IR codeset for X1.

Originally Posted by JustFred

However.... I strongly recommend using a CableCard and an HDHomeRun Prime tuner instead of the STB for video capture.

Thank you for your suggestion. However, I'm currently migrating from Comcast digital (non-X1) to Xfinity X1 and I'm looking for someone who has successfully made IR control (especially USB-UIRT) working with Xfinity X1.

[mgpaulus]

Originally Posted by KAZUNA

Unfortunately, Comcast changed the IR code for Xfinity X1 and I'm looking for the IR codeset for X1.


Thank you for your suggestion. However, I'm currently migrating from Comcast digital (non-X1) to Xfinity X1 and I'm looking for someone who has successfully made IR control (especially USB-UIRT) working with Xfinity X1.

I am using a USB-UIRT with the XFinity X1 RNG150N STB devices. The codes I am using (I have 2 STBs controlled by 1 USB-UIRT in zones)

$ cat RNG150N-1L.ir
RNG150N-1L 0 0 3 600 800 ENTER EXIT
DeviceNumber 1
0 Z20000 006A 0000 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FB 0008 0023 0008 0043 0008 0049 0008 001E 0008 001E 0008 001E 0008 001E 0008 001E 0008 0C83
1 Z20000 006A 0000 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FD 0008 0023 0008 003E 0008 004A 0008 001E 0008 001E 0008 0023 0008 001E 0008 001E 0008 0C8E
2 Z20000 0069 0000 0012 0008 0024 0008 0044 0008 001F 0008 006F 0008 0034 0008 0034 0008 002F 0008 006A 0008 0201 0008 0024 0008 0038 0008 004A 0008 001F 0008 001F 0008 0029 0008 001F 0008 001F 0008 0CA5
3 Z20000 006A 0012 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FB 0008 0023 0008 005D 0008 001F 0008 001D 0008 001E 0008 002E 0008 001E 0008 001E 0008 0C7D 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FB 0008 0023 0008 0033 0008 0049 0008 001E 0008 001E 0008 002F 0008 001E 0008 001E 0008 0C7D
4 Z20000 006A 0012 0012 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FE 0008 0022 0008 0059 0008 001E 0008 001E 0008 001E 0008 0034 0008 001E 0008 001E 0008 0C94 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FD 0008 0023 0008 002F 0008 004A 0008 001E 0008 001E 0008 0034 0008 001E 0008 001E 0008 0C92
5 Z20000 006A 0012 0012 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FF 0008 0024 0008 0054 0008 001D 0008 001E 0008 001E 0008 0039 0008 001E 0008 001E 0008 0C98 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FE 0008 0024 0008 0028 0008 004A 0008 001E 0008 001E 0008 0039 0008 001E 0008 001E 0008 0C96
6 Z20000 006A 0000 0012 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FE 0008 0024 0008 0023 0008 0049 0008 001E 0008 001E 0008 003E 0008 001E 0008 001E 0008 0C92
7 Z20000 0069 0000 0012 0008 0024 0008 0044 0008 001F 0008 006F 0008 0034 0008 0034 0008 002F 0008 006A 0008 0200 0008 0023 0008 001E 0008 004A 0008 001E 0008 001F 0008 0044 0008 001F 0008 001F 0008 0CA0
8 Z20000 006A 0012 0012 0008 0024 0008 0044 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 006A 0008 01FF 0008 0023 0008 0044 0008 001F 0008 001F 0008 001E 0008 004A 0008 001F 0008 001E 0008 0C9A 0008 0024 0008 0044 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 006A 0008 01FF 0008 0024 0008 006E 0008 0049 0008 001E 0008 001E 0008 004A 0008 001E 0008 001F 0008 0C40
9 Z20000 006A 0012 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FC 0008 0023 0008 003D 0008 001F 0008 001D 0008 001E 0008 004E 0008 001E 0008 001E 0008 0C85 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FB 0008 0023 0008 0068 0008 0049 0008 001E 0008 001E 0008 004E 0008 001E 0008 001E 0008 0C2E
ENTER Z20000 006C 0012 0012 0008 0023 0008 0043 0008 001D 0008 006E 0008 0033 0008 0033 0008 002D 0008 0068 0008 01F3 0008 0023 0008 0048 0008 001D 0008 001D 0008 0028 0008 0038 0008 001D 0008 001D 0008 0C45 0008 0023 0008 0043 0008 001D 0008 006E 0008 0033 0008 0033 0008 002D 0008 0068 0008 01F3 0008 0023 0008 001D 0008 0048 0008 001D 0008 0028 0008 0038 0008 001D 0008 001D 0008 0C45
EXIT Z20000 006A 0012 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002E 0008 0069 0008 01FA 0008 0023 0008 002D 0008 001F 0008 001D 0008 0028 0008 0053 0008 001E 0008 001E 0008 0C7D 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002E 0008 0069 0008 01FA 0008 0023 0008 0057 0008 0049 0008 001E 0008 0028 0008 0053 0008 001E 0008 001E 0008 0C28


$ cat RNG150N-1R.ir
RNG150N-1R 0 0 3 600 800 ENTER EXIT
DeviceNumber 1
0 Z10000 006A 0000 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FB 0008 0023 0008 0043 0008 0049 0008 001E 0008 001E 0008 001E 0008 001E 0008 001E 0008 0C83
1 Z10000 006A 0000 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FD 0008 0023 0008 003E 0008 004A 0008 001E 0008 001E 0008 0023 0008 001E 0008 001E 0008 0C8E
2 Z10000 0069 0000 0012 0008 0024 0008 0044 0008 001F 0008 006F 0008 0034 0008 0034 0008 002F 0008 006A 0008 0201 0008 0024 0008 0038 0008 004A 0008 001F 0008 001F 0008 0029 0008 001F 0008 001F 0008 0CA5
3 Z10000 006A 0012 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FB 0008 0023 0008 005D 0008 001F 0008 001D 0008 001E 0008 002E 0008 001E 0008 001E 0008 0C7D 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FB 0008 0023 0008 0033 0008 0049 0008 001E 0008 001E 0008 002F 0008 001E 0008 001E 0008 0C7D
4 Z10000 006A 0012 0012 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FE 0008 0022 0008 0059 0008 001E 0008 001E 0008 001E 0008 0034 0008 001E 0008 001E 0008 0C94 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FD 0008 0023 0008 002F 0008 004A 0008 001E 0008 001E 0008 0034 0008 001E 0008 001E 0008 0C92
5 Z10000 006A 0012 0012 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FF 0008 0024 0008 0054 0008 001D 0008 001E 0008 001E 0008 0039 0008 001E 0008 001E 0008 0C98 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FE 0008 0024 0008 0028 0008 004A 0008 001E 0008 001E 0008 0039 0008 001E 0008 001E 0008 0C96
6 Z10000 006A 0000 0012 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FE 0008 0024 0008 0023 0008 0049 0008 001E 0008 001E 0008 003E 0008 001E 0008 001E 0008 0C92
7 Z10000 0069 0000 0012 0008 0024 0008 0044 0008 001F 0008 006F 0008 0034 0008 0034 0008 002F 0008 006A 0008 0200 0008 0023 0008 001E 0008 004A 0008 001E 0008 001F 0008 0044 0008 001F 0008 001F 0008 0CA0
8 Z10000 006A 0012 0012 0008 0024 0008 0044 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 006A 0008 01FF 0008 0023 0008 0044 0008 001F 0008 001F 0008 001E 0008 004A 0008 001F 0008 001E 0008 0C9A 0008 0024 0008 0044 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 006A 0008 01FF 0008 0024 0008 006E 0008 0049 0008 001E 0008 001E 0008 004A 0008 001E 0008 001F 0008 0C40
9 Z10000 006A 0012 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FC 0008 0023 0008 003D 0008 001F 0008 001D 0008 001E 0008 004E 0008 001E 0008 001E 0008 0C85 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FB 0008 0023 0008 0068 0008 0049 0008 001E 0008 001E 0008 004E 0008 001E 0008 001E 0008 0C2E
ENTER Z10000 006C 0012 0012 0008 0023 0008 0043 0008 001D 0008 006E 0008 0033 0008 0033 0008 002D 0008 0068 0008 01F3 0008 0023 0008 0048 0008 001D 0008 001D 0008 0028 0008 0038 0008 001D 0008 001D 0008 0C45 0008 0023 0008 0043 0008 001D 0008 006E 0008 0033 0008 0033 0008 002D 0008 0068 0008 01F3 0008 0023 0008 001D 0008 0048 0008 001D 0008 0028 0008 0038 0008 001D 0008 001D 0008 0C45
EXIT Z10000 006A 0012 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002E 0008 0069 0008 01FA 0008 0023 0008 002D 0008 001F 0008 001D 0008 0028 0008 0053 0008 001E 0008 001E 0008 0C7D 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002E 0008 0069 0008 01FA 0008 0023 0008 0057 0008 0049 0008 001E 0008 0028 0008 0053 0008 001E 0008 001E 0008 0C28

I set this up a couple of years ago, so if you need further specifics, let me know and I'll go back and see if I can refresh my memory.

[KAZUNA]

Originally Posted by mgpaulus

I am using a USB-UIRT with the XFinity X1 RNG150N STB devices. The codes I am using (I have 2 STBs controlled by 1 USB-UIRT in zones)

I really appreiate that.

A few question about your IR file.

1. How reliable is the channel control?

2. What does the EXIT next to ENTER do? ENTER is required for X1 but what to do with EXIT?

3. Why do you need to specify DeviceNumber? Because you may have more than one USB-UIRT?

4. Don't you need RepeatCount?

5. How did you obtain the code?

By the way, I just picked up RNG150N (Pace PR150BNM) at the local Comcast store which I verified with the rep that it is X1. I hooked it up and it took an hour to complete the initialization but it came up with iGuide interface not X1 interface. The comcast tech support insists that it's a X1 box and it should update to X1 automatically but it never updates to X1.

[SHS]

Originally Posted by KAZUNA

I really appreiate that.

A few question about your IR file.

1. How reliable is the channel control?

2. What does the EXIT next to ENTER do? ENTER is required for X1 but what to do with EXIT?

3. Why do you need to specify DeviceNumber? Because you may have more than one USB-UIRT?

4. Don't you need RepeatCount?

5. How did you obtain the code?

By the way, I just picked up RNG150N (Pace PR150BNM) at the local Comcast store which I verified with the rep that it is X1. I hooked it up and it took an hour to complete the initialization but it came up with iGuide interface not X1 interface. The comcast tech support insists that it's a X1 box and it should update to X1 automatically but it never updates to X1.

1: Don't know as don't have Comcast

2: Some box req you hit enter for the change to took affect

3: More then one USB-UIRT if I recall right

4: No

5: See below
Make a new TXT file RNG150N-1L

------------------------------ copy below -----------------

RNG150N-1L 0 0 3 600 800 ENTER EXIT
DeviceNumber 1
0 Z20000 006A 0000 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FB 0008 0023 0008 0043 0008 0049 0008 001E 0008 001E 0008 001E 0008 001E 0008 001E 0008 0C83
1 Z20000 006A 0000 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FD 0008 0023 0008 003E 0008 004A 0008 001E 0008 001E 0008 0023 0008 001E 0008 001E 0008 0C8E
2 Z20000 0069 0000 0012 0008 0024 0008 0044 0008 001F 0008 006F 0008 0034 0008 0034 0008 002F 0008 006A 0008 0201 0008 0024 0008 0038 0008 004A 0008 001F 0008 001F 0008 0029 0008 001F 0008 001F 0008 0CA5
3 Z20000 006A 0012 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FB 0008 0023 0008 005D 0008 001F 0008 001D 0008 001E 0008 002E 0008 001E 0008 001E 0008 0C7D 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FB 0008 0023 0008 0033 0008 0049 0008 001E 0008 001E 0008 002F 0008 001E 0008 001E 0008 0C7D
4 Z20000 006A 0012 0012 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FE 0008 0022 0008 0059 0008 001E 0008 001E 0008 001E 0008 0034 0008 001E 0008 001E 0008 0C94 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FD 0008 0023 0008 002F 0008 004A 0008 001E 0008 001E 0008 0034 0008 001E 0008 001E 0008 0C92
5 Z20000 006A 0012 0012 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FF 0008 0024 0008 0054 0008 001D 0008 001E 0008 001E 0008 0039 0008 001E 0008 001E 0008 0C98 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FE 0008 0024 0008 0028 0008 004A 0008 001E 0008 001E 0008 0039 0008 001E 0008 001E 0008 0C96
6 Z20000 006A 0000 0012 0008 0024 0008 0043 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FE 0008 0024 0008 0023 0008 0049 0008 001E 0008 001E 0008 003E 0008 001E 0008 001E 0008 0C92
7 Z20000 0069 0000 0012 0008 0024 0008 0044 0008 001F 0008 006F 0008 0034 0008 0034 0008 002F 0008 006A 0008 0200 0008 0023 0008 001E 0008 004A 0008 001E 0008 001F 0008 0044 0008 001F 0008 001F 0008 0CA0
8 Z20000 006A 0012 0012 0008 0024 0008 0044 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 006A 0008 01FF 0008 0023 0008 0044 0008 001F 0008 001F 0008 001E 0008 004A 0008 001F 0008 001E 0008 0C9A 0008 0024 0008 0044 0008 001E 0008 006F 0008 0034 0008 0034 0008 002F 0008 006A 0008 01FF 0008 0024 0008 006E 0008 0049 0008 001E 0008 001E 0008 004A 0008 001E 0008 001F 0008 0C40
9 Z20000 006A 0012 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FC 0008 0023 0008 003D 0008 001F 0008 001D 0008 001E 0008 004E 0008 001E 0008 001E 0008 0C85 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002F 0008 0069 0008 01FB 0008 0023 0008 0068 0008 0049 0008 001E 0008 001E 0008 004E 0008 001E 0008 001E 0008 0C2E
ENTER Z20000 006C 0012 0012 0008 0023 0008 0043 0008 001D 0008 006E 0008 0033 0008 0033 0008 002D 0008 0068 0008 01F3 0008 0023 0008 0048 0008 001D 0008 001D 0008 0028 0008 0038 0008 001D 0008 001D 0008 0C45 0008 0023 0008 0043 0008 001D 0008 006E 0008 0033 0008 0033 0008 002D 0008 0068 0008 01F3 0008 0023 0008 001D 0008 0048 0008 001D 0008 0028 0008 0038 0008 001D 0008 001D 0008 0C45
EXIT Z20000 006A 0012 0012 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002E 0008 0069 0008 01FA 0008 0023 0008 002D 0008 001F 0008 001D 0008 0028 0008 0053 0008 001E 0008 001E 0008 0C7D 0008 0023 0008 0043 0008 001E 0008 006E 0008 0034 0008 0034 0008 002E 0008 0069 0008 01FA 0008 0023 0008 0057 0008 0049 0008 001E 0008 0028 0008 0053 0008 001E 0008 001E 0008 0C28

--------------------------------------------------------
Rename RNG150N-1L.ir this for Zone 2
Copy the file to
32bit ver of SageTV C:\Program Files (x86)\SageTV\Common\RemoteCodes\USB-UIRT Transceiver\
or
64bit ver of SageTV C:\Program Files\SageTV\Common\RemoteCodes\USB-UIRT Transceiver\

The other post was for Zone 1
lookup USB-UIRT setup here
https://forums.sagetv.com/forums/sho...=USB-UIRT+zone

[KAZUNA]

Anyone using USB-UIRT and successfully controlling XG2, XG1-P or XG1-A?

As I'm having trouble to make RNG150N to run in X1 interface, I'm considering these newer X1 boxes. The problem is, if I understand correctly, the IR code is different between RNG150N and other newer X1 boxes.

[SHS]

Originally Posted by KAZUNA

Anyone using USB-UIRT and successfully controlling XG2, XG1-P or XG1-A?

As I'm having trouble to make RNG150N to run in X1 interface, I'm considering these newer X1 boxes. The problem is, if I understand correctly, the IR code is different between RNG150N and other newer X1 boxes.

You should be able to learn the code from with in SageTV but if not working then used lrnhelper0.5.exe to manuel build the code http://www.usbuirt.com/lrnhelper_0_0_5.zip

I found some X1 code
Make a new TXT file comcast-x1

------------------------------ copy below -----------------

comcast-x1 0 0 3 600 800
0 0000 006D 0012 0012 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 005B 0008 001D 0008 001D 0008 0022 0008 0027 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0032 0008 0046 0008 001D 0008 0022 0008 0027 0008 001D 0008 001D 0008 0BF2
1 0000 006D 0012 0012 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0065 0008 001D 0008 001D 0008 001D 0008 0022 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 003C 0008 0046 0008 001D 0008 001D 0008 0022 0008 001D 0008 001D 0008 0BF2
2 0000 006D 0012 0012 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0060 0008 001D 0008 001D 0008 001D 0008 0027 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0037 0008 0046 0008 001D 0008 001D 0008 0027 0008 001D 0008 001D 0008 0BF2
3 0000 006D 0012 0012 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 005B 0008 001D 0008 001D 0008 001D 0008 002C 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0032 0008 0046 0008 001D 0008 001D 0008 002C 0008 001D 0008 001D 0008 0BF2
4 0000 006D 0012 0012 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0056 0008 001D 0008 001D 0008 001D 0008 0032 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 002C 0008 0046 0008 001D 0008 001D 0008 0032 0008 001D 0008 001D 0008 0BF2
5 0000 006D 0012 0012 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0051 0008 001D 0008 001D 0008 001D 0008 0037 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0027 0008 0046 0008 001D 0008 001D 0008 0037 0008 001D 0008 001D 0008 0BF2
6 0000 006D 0012 0012 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 004B 0008 001D 0008 001D 0008 001D 0008 003C 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0022 0008 0046 0008 001D 0008 001D 0008 003C 0008 001D 0008 001D 0008 0BF2
7 0000 006D 0012 0012 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0046 0008 001D 0008 001D 0008 001D 0008 0041 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 001D 0008 0046 0008 001D 0008 001D 0008 0041 0008 001D 0008 001D 0008 0BF2
8 0000 006D 0012 0012 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0041 0008 001D 0008 001D 0008 001D 0008 0046 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 006A 0008 0046 0008 001D 0008 001D 0008 0046 0008 001D 0008 001D 0008 0BF2
9 0000 006D 0012 0012 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 003C 0008 001D 0008 001D 0008 001D 0008 004B 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0065 0008 0046 0008 001D 0008 001D 0008 004B 0008 001D 0008 001D 0008 0BF2


--------------------------------------------------------
Rename comcast-x1.ir this has no zone support
Copy the file to
32bit ver of SageTV C:\Program Files (x86)\SageTV\Common\RemoteCodes\USB-UIRT Transceiver\
or
64bit ver of SageTV C:\Program Files\SageTV\Common\RemoteCodes\USB-UIRT Transceiver\

See it work for you

[KAZUNA]

Originally Posted by SHS

You should be able to learn the code from with in SageTV but if not working then used lrnhelper0.5.exe to manuel build the code http://www.usbuirt.com/lrnhelper_0_0_5.zip

I think new X1 boxes will come with XR15 remote which is RF only. How do you learn IR code? Perhaps using older IR remote?

Originally Posted by SHS

I found some X1 code

Great but it's missing ENTER code which is required for controlling X1?

[SHS]

Originally Posted by KAZUNA

I think new X1 boxes will come with XR15 remote which is RF only. How do you learn IR code? Perhaps using older IR remote?


Great but it's missing ENTER code which is required for controlling X1?

Not a problem but dose it work ?.

Enter 0000 006D 0012 0012 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0051 0008 001D 0008 001D 0008 0037 0008 001D 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0027 0008 0046 0008 001D 0008 0037 0008 001D 0008 001D 0008 001D 0008 0BF2

Exit 0000 006D 0012 0012 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 002C 0008 001D 0008 001D 0008 0027 0008 0051 0008 001D 0008 001D 0008 0BF2 0008 0022 0008 0041 0008 001D 0008 006A 0008 0032 0008 0032 0008 002C 0008 0065 0008 020D 0008 0022 0008 0056 0008 0046 0008 001D 0008 0027 0008 0051 0008 001D 0008 001D 0008 0BF2

The codes come form Remote Central
Also did read this https://www.xfinity.com/support/arti...-remote-unpair

[KAZUNA]

Originally Posted by SHS

The codes come form Remote Central

Hmm. I searched the files and forums but I cannot find it. How do you find it on Remote Central?

[mgpaulus]

Originally Posted by KAZUNA

I really appreiate that.

A few question about your IR file.

1. How reliable is the channel control?

I use cables like this: ebay.com:TiVo-to-DTA-Cable-Box-Infrared-IR-Direct-Connect-Cable-Replaces-IR-Blaster, so channel changing is very reliable once I get everything stabilized

Originally Posted by KAZUNA

2. What does the EXIT next to ENTER do? ENTER is required for X1 but what to do with EXIT?

Sometimes the boxes get into a wierd state, so I like to send an Exit before I try to do channel changes.

Originally Posted by KAZUNA

3. Why do you need to specify DeviceNumber? Because you may have more than one USB-UIRT?

I do have more than one USB-UIRT on my system

Originally Posted by KAZUNA

4. Don't you need RepeatCount?

Since I use a DTA cable, I don't need Repeat Count. At least, I haven't had any problems.

Originally Posted by KAZUNA

5. How did you obtain the code?

I probably "learned" them. Or I may have found one out in the wild and learned/adapted it to myself. I've been using this setup for at least a couple of years, so I've kind of forgotten some of those specifics.

Originally Posted by KAZUNA

By the way, I just picked up RNG150N (Pace PR150BNM) at the local Comcast store which I verified with the rep that it is X1. I hooked it up and it took an hour to complete the initialization but it came up with iGuide interface not X1 interface. The comcast tech support insists that it's a X1 box and it should update to X1 automatically but it never updates to X1.

I am using the Pace PR150BNM. But, since I have them dedicated solely to Sagetv, and I am mainly using them for Premium channel recording (I have a couple of HDHR-3-CC devices for non-premium channels), I don't really care what interface they have, as long as they tune the channels I want, and do so when I want without getting into a snit.

[KAZUNA]

Originally Posted by mgpaulus

I use cables like this: ebay.com:TiVo-to-DTA-Cable-Box-Infrared-IR-Direct-Connect-Cable-Replaces-IR-Blaster, so channel changing is very reliable once I get everything stabilized

It sounds very promising.

Originally Posted by mgpaulus

Sometimes the boxes get into a wierd state, so I like to send an Exit before I try to do channel changes.

So the last one in the line is for the code to be sent before the numbers, and the 2nd last one is for the code to be sent after the numbers?

Originally Posted by mgpaulus

Since I use a DTA cable, I don't need Repeat Count. At least, I haven't had any problems.

It makes sense.

Originally Posted by mgpaulus

I don't really care what interface they have, as long as they tune the channels I want, and do so when I want without getting into a snit.

I don't care the interface as well but the HD channel I want can be tuned on X1 only. That is the only reason I have to migrate to X1.

[wnjj]

I’m pretty sure DeviceNumber needs to be there no matter how many you have since the “multi” version of the driver expects that row to be there.

[SHS]

Originally Posted by wnjj

I’m pretty sure DeviceNumber needs to be there no matter how many you have since the “multi” version of the driver expects that row to be there.

No on when you add more then one device

[wnjj]

Originally Posted by SHS

No on when you add more then one device

I checked the source code and it is indeed optional. I remembered it wrong.