Error (-10) No encoders can tune selected station

[jarredduq]

I installed a new ASUS router today, because my current router failed. However the IP addresses of my HDHOMERun cable card tuners changed. I'm running SageTV 9.1.8.770 and OPENDCT 0.5.28. Since the IP address change

I'm getting the error "no encoders can tune selected station" when selecting a program from the guide.

I've re-run the OPENDCT setup instructions and I've removed and re-added my HDHOMERun tuners from the video sources.

Im at a loss, asnmy SageTV is pretty much dead in the water without any working tuners.

Thanks in advance for anybody's help!

[EnterNoEscape]

For a typical home, a new router can cause a lot of IP addresses to change. I would probably do something like the following:

1. Power-cycle all of the HDHomeRuns since they might not have tried to get a new IP address from your new router.
2. Make sure your SageTV server didn't change IP addresses.
3. Restart the OpenDCT service.
4. Restart the SageTV service.
5. Make sure in SageTV you see either 127.0.0.1 or the IP address of your service on the OpenDCT devices.