SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support
Reload this Page Halt detected for initally, then audio only, no video
Forum Rules FAQs Community Downloads Today's Posts Search

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-24-2017, 01:15 PM
Foggy Foggy is offline
Sage User
  
Join Date: Oct 2015
Posts: 44
Ignore - posted to wrong group.
incorrectly added this to the wrong group.
Last edited by Foggy; 08-24-2017 at 03:08 PM. Reason: was posted in wrong group
Reply With Quote
  #2  
Old 08-24-2017, 03:06 PM
Foggy Foggy is offline
Sage User
  
Join Date: Oct 2015
Posts: 44
Halt detected for initally, then audio only, no video
I've been getting some odd recordings recently.
halt detected in recording
The device input "SageDCT-HDHomeRun Prim Tuner 13212AA5-0 on 127.0.0.1:6970 Digital TV Tuner" stopped producing data while recording "Renovation Gap" on HGTVD on physcal channel 765.
SageTV will try to retore the device. This may be caused by a channel that is no longer available.

The first 1m 30s (or so) of the viewing progress bar is red, the remainder is green. I get audio for all of the green portion, but no video.

See attached log file.

I am able to view the recording with VideoLAN.

This has been happening with some, but not all of the recordings in the last few weeks.

Do I need to install the LAV codec's?
Any hints?
(initially posted in Hardware - re-posted here)
Attached Files
File Type: txt SageTV log-RenovationGap.txt (36.5 KB, 139 views)
Reply With Quote
  #3  
Old 08-24-2017, 03:42 PM
wnjj wnjj is offline
Sage Icon
  
Join Date: Jan 2009
Posts: 1,514
It appears that whatever made the recording glitch caused the recording to be written into 2 segments (this is expected). However, when it did that, the first segment is zero length so the system doesn't seem to know how to bridge that into the next segment.

The bulk of the show is recorded into '=G:\TV\RenovationGap-S01E01-HodgepodgeNoMore-3940715-1.ts' but the playback keeps reporting this for the first segment:
Code:
Thu 8/24 13:06:30.875 [Seeker@15037e4] Doing pre-emptive file format detection on recording MediaFile....G:\TV\RenovationGap-S01E01-HodgepodgeNoMore-3940715-0.ts
Thu 8/24 13:06:30.882 [Seeker@15037e4] Returning null format for zero-length file
Not sure but it seems like a corner case playback bug.
Reply With Quote
  #4  
Old 08-24-2017, 07:34 PM
Foggy Foggy is offline
Sage User
  
Join Date: Oct 2015
Posts: 44
Forgot to provide my setup.
SageTv v9.1.6.747
SageDCT, v2.6.0.0
Windows 10 PRO
HDHomeRun Prime w/Cable card - Spectrum

I'm starting to wonder if my video HD is going bad and taking about a 1 minute to respond.

After the system has been sitting idle for a few hours, when I use Program Guide to view TV, I get the spinning circle for 30+ seconds, then get "No Signal". If I quit that, and try a different channel, I get the channel right away and when I go back to the original channel, I get that channel right away.
Reply With Quote
  #5  
Old 08-28-2017, 02:02 PM
Foggy Foggy is offline
Sage User
  
Join Date: Oct 2015
Posts: 44
bump.
Any thoughts?
All recordings this weekend had this issue.
Reply With Quote
  #6  
Old 08-29-2017, 10:21 AM
egeller egeller is offline
Sage Aficionado
  
Join Date: Feb 2006
Location: Drexel Hill, PA
Posts: 334
SageDCT? I see that in your config.

OpenDCT is more advanced, actively supported, and may fix the sort of issue you describe. See the thread on OpenDCT, in this forum, for more information on how to download and install it. It's a relatively simple process. I cannot guarantee it will solve your issue, if the root cause is a bad tuner, but it can only help.

I had similar issues with SageDCT. Changing to V9 and OpenDCT I do not see audio-only issues with tuners.
__________________
Server:UnRaid;2x Intel Xeon E5; SuperMicro moboard;Also:BM3000 w/ WMC; 2x Ceton ETH 6; OpenDCT
SageTV Extender:3x HD200 1x HD300 1xFireTV
Sage TV: 9.2 on Java 11, Standard STVi, Comskip Playback, Web Interface, 24 Hour Clock, SRE, Playon
All in lovely Drexel Hill, PA
Reply With Quote
  #7  
Old 08-29-2017, 02:45 PM
Foggy Foggy is offline
Sage User
  
Join Date: Oct 2015
Posts: 44
Additional information - The above viewing was done on the server, from the SageTV app.

When I attempted to view the same recorded programs on my HD200, I did not get either audio or video.

When I view it on the ShieldTV, it plays correctly.

Reminder - when I play these recordings on the server, I get audio, but not video

This is strange.

This is a hardware or software issue?
Reply With Quote
  #8  
Old 08-29-2017, 02:48 PM
Foggy Foggy is offline
Sage User
  
Join Date: Oct 2015
Posts: 44
Egeller,
I have considered converting to OpenDCT and have downloaded a recent version, but since the SageDCT had been working until a few weeks ago, I wold like to understand the cause before I start changing too many things.

I've already updated SageTV to the recent version (I was one or two minor changes back) and that update did not improve anything.
Reply With Quote
  #9  
Old 08-29-2017, 07:34 PM
Foggy Foggy is offline
Sage User
  
Join Date: Oct 2015
Posts: 44
I replaced SageDCT with OpenDCT and my problem has slightly worse.

It used to be that I could select a channel, get a no signal, close that channel and reselect that channel and be able to view it and any other channel I want to view.

Now, with OpenDCT, while it generally works, I occasionally attempt to view a channel and get no signal if I go without viewing a channel for for a few minutes.

The HDHomeRun view applet has no problems tuning channels.
Reply With Quote
  #10  
Old 08-31-2017, 08:23 PM
Foggy Foggy is offline
Sage User
  
Join Date: Oct 2015
Posts: 44
Bump
This has gotten worse. SageTV recording and viewing has completely quit working. Every time I attempt to view a program, I get "No Signal".

I do not have any problems getting video when using the HDHomerun application, but I am not able to get any video when using SageTV.

I've changed from SageDCT to OpenDCT and back again and that did not make a difference.

Any suggestions?
Reply With Quote
  #11  
Old 08-31-2017, 08:41 PM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
  
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,657
If you can attempt to tune in with OpenDCT and post the OpenDCT log, I might be able to give you an idea of what is going on.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.
Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #12  
Old 09-01-2017, 02:46 PM
Foggy Foggy is offline
Sage User
  
Join Date: Oct 2015
Posts: 44
Here is a snippet from the OpenDCT logs. (probably more data than necessary)
Looks like a connectivity issue.


Quote:
21:58:42.387 [SageTVManagerShutdown] INFO 21:58:38.188 [DiscoveryManagerShutdown] INFO Main - Stopping device discovery services...
21:58:38.204 [Shutdown] INFO Main - OpenDCT has received a signal to stop.
21:58:38.204 [SageTVManagerShutdown] INFO Main - Stopping all SageTV socket servers...
21:58:38.204 [NanoHTTPDShutdown] INFO Main - Stopping web server...
21:58:38.204 [Shutdown] INFO Main - Saving current configuration...
21:58:38.204 [PowerMessageManagerShutdown] INFO Main - Stopping power messages...
21:58:38.204 [ChannelManagerShutdown] INFO Main - Stopping all channel update threads...
21:58:38.204 [PowerMessageManagerShutdown] INFO WindowsPowerMessagePump - Posting WM_QUIT message and waiting for message pump thread to exit.
21:58:38.204 [ChannelManagerShutdown] INFO ChannelManager - Saving the channel lineup 'dct_hdhomerun'.
21:58:38.204 [UPnPDiscovery-40] INFO UpnpManager - UPnP discovery thread was interrupted => java.lang.InterruptedException: sleep interrupted
21:58:38.204 [NanoHTTPDShutdown] INFO NanoHTTPDManager - Stopping webserver on port 9091...
21:58:38.204 [SageTVManagerShutdown] DEBUG SageTVSocketServer - Stopping listening thread...
21:58:38.204 [DiscoveryManagerShutdown] WARN DiscoveryRegistryListener - Before UPnP shutdown, the registry did not contain any devices.
21:58:38.204 [DiscoveryManagerShutdown] DEBUG DiscoveryRegistryListener - Shutdown of UPnP registry complete.
21:58:38.204 [DiscoveryManagerShutdown] INFO DiscoveryManager - UPnP discovery stopped.
21:58:38.204 [SageTVTuningMonitor-63] INFO SageTVTuningMonitor - Tuning monitor thread interrupted.
21:58:38.204 [SageTVSocketServer-64:9000] INFO SageTVSocketServer - Stopped listening on port 9000...
21:58:38.204 [SageTVManagerShutdown] INFO SageTVManager - The capture device 'DCT-HDHomeRun Prime Tuner 13212AA5-1' is being unloaded.
21:58:38.204 [SageTVManagerShutdown] DEBUG HDHRNativeCaptureDevice - Capture device is now re-locked.
21:58:38.204 [SageTVManagerShutdown] DEBUG RTPCaptureDeviceServices - Producer was not running.
21:58:38.204 [HDHomeRunDiscoveryReceive-41] DEBUG HDHomeRunDiscovery - Channel was closed while receiving HDHomeRun discovery packets from [/192.168.56.255:65001, /192.168.0.255:65001] => java.nio.channels.ClosedByInterruptException
at java.nio.channels.spi.AbstractInterruptibleChannel.end(Unknown Source)
at sun.nio.ch.DatagramChannelImpl.receive(Unknown Source)
at opendct.tuning.hdhomerun.HDHomeRunDiscovery$ReceiveThread.run(HDHomeRunDiscovery.java:364)
at java.lang.Thread.run(Unknown Source)

21:58:38.204 [HDHomeRunDiscoveryReceive-41] DEBUG HDHomeRunDiscovery - Channel was closed while receiving HDHomeRun discovery packets from [/192.168.56.255:65001, /192.168.0.255:65001] => java.nio.channels.ClosedByInterruptException
at java.nio.channels.spi.AbstractInterruptibleChannel.end(Unknown Source)
at sun.nio.ch.DatagramChannelImpl.receive(Unknown Source)
at opendct.tuning.hdhomerun.HDHomeRunDiscovery$ReceiveThread.run(HDHomeRunDiscovery.java:364)
at java.lang.Thread.run(Unknown Source)

21:58:38.204 [WindowsPowerMessagePump] INFO WindowsPowerMessagePump - Message pump stopped.
21:58:38.204 [HDHomeRunDiscoverySend-41] DEBUG HDHomeRunDiscovery - Interrupted while waiting for next broadcast to be sent => java.lang.InterruptedException: sleep interrupted
at java.lang.Thread.sleep(Native Method)
at opendct.tuning.hdhomerun.HDHomeRunDiscovery.run(HDHomeRunDiscovery.java:307)
at java.lang.Thread.run(Unknown Source)

21:58:38.220 [DiscoveryManagerShutdown] INFO DiscoveryManager - HDHomeRun discovery stopped.
21:58:38.220 [DiscoveryManagerShutdown] INFO DiscoveryManager - Generic HTTP discovery stopped.
21:58:38.220 [DiscoveryManagerShutdown] INFO DiscoveryManager - Generic Pipe discovery stopped.
21:58:39.246 [SageTVManagerShutdown] ERROR HDHRNativeCaptureDevice - Unable to unlock HDHomeRun because it cannot be reached => java.net.ConnectException: Connection refused: connect
at sun.nio.ch.Net.connect0(Native Method)
at sun.nio.ch.Net.connect(Unknown Source)
at sun.nio.ch.Net.connect(Unknown Source)
at sun.nio.ch.SocketChannelImpl.connect(Unknown Source)
at java.nio.channels.SocketChannel.open(Unknown Source)
at opendct.tuning.hdhomerun.HDHomeRunControl.connectSocket(HDHomeRunControl.java:281)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:143)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:111)
at opendct.tuning.hdhomerun.HDHomeRunControl.getVariable(HDHomeRunControl.java:66)
at opendct.tuning.hdhomerun.HDHomeRunTuner.get(HDHomeRunTuner.java:124)
at opendct.tuning.hdhomerun.HDHomeRunTuner.getLockkey(HDHomeRunTuner.java:299)
at opendct.tuning.hdhomerun.HDHomeRunTuner.clearLockkey(HDHomeRunTuner.java:357)
at opendct.capture.HDHRNativeCaptureDevice.stopDevice(HDHRNativeCaptureDevice.java:1655)
at opendct.sagetv.SageTVManager.stopAndClearAllCaptureDevices(SageTVManager.java:403)
at opendct.Main$4.run(Main.java:161)

21:58:40.293 [SageTVManagerShutdown] ERROR HDHRNativeCaptureDevice - Unable to clear the HDHomeRun target because it cannot be reached => java.net.ConnectException: Connection refused: connect
at sun.nio.ch.Net.connect0(Native Method)
at sun.nio.ch.Net.connect(Unknown Source)
at sun.nio.ch.Net.connect(Unknown Source)
at sun.nio.ch.SocketChannelImpl.connect(Unknown Source)
at java.nio.channels.SocketChannel.open(Unknown Source)
at opendct.tuning.hdhomerun.HDHomeRunControl.connectSocket(HDHomeRunControl.java:281)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:143)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:111)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:95)
at opendct.tuning.hdhomerun.HDHomeRunTuner.set(HDHomeRunTuner.java:155)
at opendct.tuning.hdhomerun.HDHomeRunTuner.clearTarget(HDHomeRunTuner.java:552)
at opendct.capture.HDHRNativeCaptureDevice.stopDevice(HDHRNativeCaptureDevice.java:1663)
at opendct.sagetv.SageTVManager.stopAndClearAllCaptureDevices(SageTVManager.java:403)
at opendct.Main$4.run(Main.java:161)

21:58:40.293 [SageTVManagerShutdown] INFO SageTVManager - The capture device 'DCT-HDHomeRun Prime Tuner 13212AA5-0' is being unloaded.
21:58:40.293 [SageTVManagerShutdown] INFO HDHRNativeCaptureDevice - Capture device was already locked.
21:58:40.293 [SageTVManagerShutdown] DEBUG RTPCaptureDeviceServices - Producer was not running.
21:58:41.340 [SageTVManagerShutdown] ERROR HDHRNativeCaptureDevice - Unable to unlock HDHomeRun because it cannot be reached => java.net.ConnectException: Connection refused: connect
at sun.nio.ch.Net.connect0(Native Method)
at sun.nio.ch.Net.connect(Unknown Source)
at sun.nio.ch.Net.connect(Unknown Source)
at sun.nio.ch.SocketChannelImpl.connect(Unknown Source)
at java.nio.channels.SocketChannel.open(Unknown Source)
at opendct.tuning.hdhomerun.HDHomeRunControl.connectSocket(HDHomeRunControl.java:281)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:143)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:111)
at opendct.tuning.hdhomerun.HDHomeRunControl.getVariable(HDHomeRunControl.java:66)
at opendct.tuning.hdhomerun.HDHomeRunTuner.get(HDHomeRunTuner.java:124)
at opendct.tuning.hdhomerun.HDHomeRunTuner.getLockkey(HDHomeRunTuner.java:299)
at opendct.tuning.hdhomerun.HDHomeRunTuner.clearLockkey(HDHomeRunTuner.java:357)
at opendct.capture.HDHRNativeCaptureDevice.stopDevice(HDHRNativeCaptureDevice.java:1655)
at opendct.sagetv.SageTVManager.stopAndClearAllCaptureDevices(SageTVManager.java:403)
at opendct.Main$4.run(Main.java:161)

21:58:42.387 [SageTVManagerShutdown] ERROR HDHRNativeCaptureDevice - Unable to clear the HDHomeRun target because it cannot be reached => java.net.ConnectException: Connection refused: connect
at sun.nio.ch.Net.connect0(Native Method)
at sun.nio.ch.Net.connect(Unknown Source)
at sun.nio.ch.Net.connect(Unknown Source)
at sun.nio.ch.SocketChannelImpl.connect(Unknown Source)
at java.nio.channels.SocketChannel.open(Unknown Source)
at opendct.tuning.hdhomerun.HDHomeRunControl.connectSocket(HDHomeRunControl.java:281)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:143)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:111)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:95)
at opendct.tuning.hdhomerun.HDHomeRunTuner.set(HDHomeRunTuner.java:155)
at opendct.tuning.hdhomerun.HDHomeRunTuner.clearTarget(HDHomeRunTuner.java:552)
at opendct.capture.HDHRNativeCaptureDevice.stopDevice(HDHRNativeCaptureDevice.java:1663)
at opendct.sagetv.SageTVManager.stopAndClearAllCaptureDevices(SageTVManager.java:403)
at opendct.Main$4.run(Main.java:161)

21:58:42.387 [SageTVManagerShutdown] INFO SageTVManager - The capture device 'DCT-HDHomeRun Prime Tuner 13212AA5-2' is being unloaded.
21:58:42.387 [SageTVManagerShutdown] DEBUG HDHRNativeCaptureDevice - Capture device is now re-locked.
21:58:42.387 [SageTVManagerShutdown] DEBUG RTPCaptureDeviceServices - Producer was not running.
21:58:43.434 [SageTVManagerShutdown] ERROR HDHRNativeCaptureDevice - Unable to unlock HDHomeRun because it cannot be reached => java.net.ConnectException: Connection refused: connect
at sun.nio.ch.Net.connect0(Native Method)
at sun.nio.ch.Net.connect(Unknown Source)
at sun.nio.ch.Net.connect(Unknown Source)
at sun.nio.ch.SocketChannelImpl.connect(Unknown Source)
at java.nio.channels.SocketChannel.open(Unknown Source)
at opendct.tuning.hdhomerun.HDHomeRunControl.connectSocket(HDHomeRunControl.java:281)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:143)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:111)
at opendct.tuning.hdhomerun.HDHomeRunControl.getVariable(HDHomeRunControl.java:66)
at opendct.tuning.hdhomerun.HDHomeRunTuner.get(HDHomeRunTuner.java:124)
at opendct.tuning.hdhomerun.HDHomeRunTuner.getLockkey(HDHomeRunTuner.java:299)
at opendct.tuning.hdhomerun.HDHomeRunTuner.clearLockkey(HDHomeRunTuner.java:357)
at opendct.capture.HDHRNativeCaptureDevice.stopDevice(HDHRNativeCaptureDevice.java:1655)
at opendct.sagetv.SageTVManager.stopAndClearAllCaptureDevices(SageTVManager.java:403)
at opendct.Main$4.run(Main.java:161)

21:58:44.480 [SageTVManagerShutdown] ERROR HDHRNativeCaptureDevice - Unable to clear the HDHomeRun target because it cannot be reached => java.net.ConnectException: Connection refused: connect
at sun.nio.ch.Net.connect0(Native Method)
at sun.nio.ch.Net.connect(Unknown Source)
at sun.nio.ch.Net.connect(Unknown Source)
at sun.nio.ch.SocketChannelImpl.connect(Unknown Source)
at java.nio.channels.SocketChannel.open(Unknown Source)
at opendct.tuning.hdhomerun.HDHomeRunControl.connectSocket(HDHomeRunControl.java:281)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:143)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:111)
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:95)
at opendct.tuning.hdhomerun.HDHomeRunTuner.set(HDHomeRunTuner.java:155)
at opendct.tuning.hdhomerun.HDHomeRunTuner.clearTarget(HDHomeRunTuner.java:552)
at opendct.capture.HDHRNativeCaptureDevice.stopDevice(HDHRNativeCaptureDevice.java:1663)
at opendct.sagetv.SageTVManager.stopAndClearAllCaptureDevices(SageTVManager.java:403)
at opendct.Main$4.run(Main.java:161)
Reply With Quote
  #13  
Old 09-01-2017, 05:21 PM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
  
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,657
It's interesting that it can discover them, but everything breaks down after that. You'll want to disable ufw if it's running for the moment. This could be any number of things, but I would start with any software that blocks traffic such as a firewall.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.
Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
  #14  
Old 09-01-2017, 06:54 PM
Foggy Foggy is offline
Sage User
  
Join Date: Oct 2015
Posts: 44
EnterNoEscape, Thanks for your hint.

Network Discovery (UPnP-In and Out) for the Domain was disabled (Public was also disabled, Private was enabled)

I enabled UPnP-In and UPnP-Out for the domain and SageTV seems to be working better.

I suspect this firewall rule change might have happened when MicroSoft pushed their last update a few weeks ago.

The below log does contains some interesting messages but no errors.

INFO mpegts - [378eb0c0] decoding for stream 0 failed
INFO FFmpegStreamDetection - Desired program set. Stream details unavailable for one or more streams. Trying again with an extended probe.

WARN mpegts - [378eb0c0] PES packet size mismatch

Quote:

20:32:35.346 [FFmpegTransSageTVConsumerImpl-180CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegTranscoder - Writing header
20:32:35.346 [FFmpegTransSageTVConsumerImpl-180CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegTranscoder - Initialized FFmpeg transcoder stream output.
20:32:36.040 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG SageTVRequestHandler - Replied: 'OK'
20:32:36.986 [SageTVTuningMonitor-64] DEBUG HDHomeRunControl - key: '/tuner2/vstatus' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.102
20:32:40.248 [SageTVRequestHandler-172:Unknown] DEBUG SageTVRequestHandler - SageTV sent: 'STOP DCT-HDHomeRun Prime Tuner 13212AA5-2 Digital TV Tuner'
20:32:40.248 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHRNativeCaptureDevice - Stopping encoding...
20:32:40.248 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG RTPCaptureDeviceServices - Stopping producer thread...
20:32:40.248 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG RTPCaptureDeviceServices - Waiting for producer thread to stop...
20:32:40.249 [NIORTPProducerImpl-176CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG NIORTPProducerImpl - Producer was closed by an asynchronous close exception => null
20:32:40.249 [NIORTPProducerImpl-176CT-HDHomeRun Prime Tuner 13212AA5-2] INFO NIORTPProducerImpl - Producer thread has disconnected.
20:32:40.249 [NIORTPProducerImpl-176CT-HDHomeRun Prime Tuner 13212AA5-2] INFO NIORTPProducerImpl - Producer thread has stopped.
20:32:40.249 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG BasicCaptureDevice - Stopping consumer thread...
20:32:40.249 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG BasicCaptureDevice - Waiting for consumer thread to stop...
20:32:40.249 [FFmpegTransSageTVConsumerImpl-180CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegContext - FFmpeg consumer was interrupted while reading.
20:32:40.249 [FFmpegTransSageTVConsumerImpl-180CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegContext - Returning AVERROR_EOF in readCallback.call()
20:32:40.249 [FFmpegTransSageTVConsumerImpl-180CT-HDHomeRun Prime Tuner 13212AA5-2] WARN mpegts - [378eb0c0] PES packet size mismatch
20:32:40.259 [FFmpegTransSageTVConsumerImpl-180CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegTranscoder - FFmpeg transcoder ended with code 0
20:32:40.260 [FFmpegTransSageTVConsumerImpl-180CT-HDHomeRun Prime Tuner 13212AA5-2] INFO NIOSageTVMediaServer - Sending 'CLOSE' to SageTV server...
20:32:40.268 [FFmpegTransSageTVConsumerImpl-180CT-HDHomeRun Prime Tuner 13212AA5-2] INFO NIOSageTVMediaServer - Sending 'QUIT' to SageTV server...
20:32:40.268 [FFmpegTransSageTVConsumerImpl-180CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegContext - avcodec_close
20:32:40.268 [FFmpegTransSageTVConsumerImpl-180CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegContext - avio_closep
20:32:40.268 [FFmpegTransSageTVConsumerImpl-180CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegContext - avformat_free_context
20:32:40.269 [FFmpegTransSageTVConsumerImpl-180CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegTransSageTVConsumerImpl - FFmpeg Transcoder consumer thread stopped.
20:32:40.269 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHomeRunControl - key: '/tuner2/channel' value: 'none' lockKey: '1062731766' sendLength: 39 address: 192.168.0.102
20:32:40.271 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHomeRunControl - key: '/tuner2/target' value: 'none' lockKey: '1062731766' sendLength: 38 address: 192.168.0.102
20:32:40.272 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHomeRunControl - key: '/tuner2/lockkey' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.102
20:32:40.273 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHomeRunControl - key: '/tuner2/lockkey' value: 'none' lockKey: '1062731766' sendLength: 39 address: 192.168.0.102
20:32:40.274 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHomeRunControl - key: '/tuner2/lockkey' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.102
20:32:40.275 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] INFO HDHRNativeCaptureDevice - HDHomeRun is now unlocked.
20:32:40.275 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHRNativeCaptureDevice - Capture device is now re-unlocked.
20:32:40.275 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG SageTVRequestHandler - Replied: 'OK'
20:32:49.634 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG SageTVRequestHandler - SageTV sent: 'START DCT-HDHomeRun Prime Tuner 13212AA5-2 Digital TV Tuner|1799158221|764|3008624739268|F:\TV\DinersDriveInsandDives-S16E05-SavorySensations-3901287-0.ts|Great'
20:32:49.635 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHRNativeCaptureDevice - Capture device is now re-locked.
20:32:49.635 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG SageTVRequestHandler - Starting network encoder via upload ID '1799158221' to file name 'F:\TV\DinersDriveInsandDives-S16E05-SavorySensations-3901287-0.ts'.
20:32:49.635 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHomeRunControl - key: '/tuner2/lockkey' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.102
20:32:49.636 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHomeRunControl - key: '/tuner2/lockkey' value: '1062731766' lockKey: '1062731766' sendLength: 45 address: 192.168.0.102
20:32:49.636 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] INFO HDHRNativeCaptureDevice - HDHomeRun is now locked.
20:32:49.637 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG RTPCaptureDeviceServices - Producer was not running.
20:32:49.637 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG BasicCaptureDevice - Consumer is not in progress.
20:32:49.637 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG DynamicConsumerImpl - Using default consumer 'opendct.consumer.FFmpegTransSageTVConsumerImpl' for channel '764'
20:32:49.641 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] INFO HDHRNativeCaptureDevice - Starting the encoding for the channel '764' from the device 'DCT-HDHomeRun Prime Tuner 13212AA5-2' to the file 'F:\TV\DinersDriveInsandDives-S16E05-SavorySensations-3901287-0.ts' via the upload id '1799158221'...
20:32:49.641 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHomeRunControl - key: '/tuner2/vchannel' value: '764' lockKey: '1062731766' sendLength: 39 address: 192.168.0.102
20:32:49.642 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] INFO HDHRNativeCaptureDevice - Configuring and starting the new RTP producer...
20:32:49.643 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG RTPCaptureDeviceServices - Producer was not running.
20:32:49.643 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHomeRunControl - key: '/tuner2/target' value: 'rtp://192.168.0.10:8452' lockKey: '1062731766' sendLength: 57 address: 192.168.0.102
20:32:49.644 [NIORTPProducerImpl-195CT-HDHomeRun Prime Tuner 13212AA5-2] INFO NIORTPProducerImpl - Producer thread is running.
20:32:49.645 [NIORTPProducerImpl-195CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG NIORTPProducerImpl - Thread priority is 9.
20:32:49.646 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHomeRunControl - key: '/tuner2/program' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.102
20:32:49.747 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHomeRunControl - key: '/tuner2/program' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.102
20:32:49.748 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] INFO HDHRNativeCaptureDevice - Configuring and starting the new SageTV consumer...
20:32:49.748 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] INFO NIOSageTVMediaServer - Connecting to SageTV server on socket /127.0.0.1:7818...
20:32:49.748 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] INFO NIOSageTVMediaServer - Sending 'WRITEOPEN F:\TV\DinersDriveInsandDives-S16E05-SavorySensations-3901287-0.ts 1799158221' to SageTV server...
20:32:49.749 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG BasicCaptureDevice - Consumer is not in progress.
20:32:49.750 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHomeRunControl - key: '/tuner2/vstatus' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.102
20:32:49.750 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegTransSageTVConsumerImpl - FFmpeg Transcoder consumer thread is now running.
20:32:49.750 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegTransSageTVConsumerImpl - Thread priority is 8.
20:32:49.751 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegStreamDetection - Calling avformat_open_input
20:32:50.263 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegStreamDetection - Before avformat_find_stream_info() pos=10528 bytes_read=10528 seek_count=0. probesize: 165628 analyzeduration: 2000000.
20:32:50.980 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO mpegts - [378eb0c0] decoding for stream 0 failed
20:32:50.991 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 781704
20:32:50.991 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 781704, returnValue = 792233
20:32:50.991 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 781704
20:32:50.991 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 781704, returnValue = 793549
20:32:50.992 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 0, offset = 543549, readIndex = 781704
20:32:50.992 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 0, offset = 543549, readIndex = 543549, returnValue = 543549
20:32:51.046 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 876456
20:32:51.046 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 876456, returnValue = 876457
20:32:51.046 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 0, offset = 0, readIndex = 876456
20:32:51.046 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 0, offset = 0, readIndex = 0, returnValue = 0
20:32:51.046 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 0
20:32:51.046 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 0, returnValue = 876457
20:32:51.047 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegStreamDetection - After avformat_find_stream_info() pos=0 bytes_read=1114611 seek_count=2. probesize: 165628 analyzeduration: 2000000.
20:32:51.047 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegStreamDetection - current container duration = 1.259322 seconds
20:32:51.047 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegUtil - Video stream 0 has no width or no height.
20:32:51.047 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegStreamDetection - Desired program set. Stream details unavailable for one or more streams. Trying again with an extended probe.
20:32:51.047 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegStreamDetection - Calling avformat_open_input
20:32:51.048 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegStreamDetection - Before avformat_find_stream_info() pos=65536 bytes_read=65536 seek_count=0. probesize: 877960 analyzeduration: 2259322.
20:32:51.251 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG HDHomeRunControl - key: '/tuner2/vstatus' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.102
20:32:51.648 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 1509452
20:32:51.648 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 1509452, returnValue = 1509453
20:32:51.648 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 1509452
20:32:51.648 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 1509452, returnValue = 1509453
20:32:51.648 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 0, offset = 1259453, readIndex = 1509452
20:32:51.648 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 0, offset = 1259453, readIndex = 1259453, returnValue = 1259453
20:32:51.803 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 1666056
20:32:51.803 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 1666056, returnValue = 1666057
20:32:51.803 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 0, offset = 0, readIndex = 1666056
20:32:51.803 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 0, offset = 0, readIndex = 0, returnValue = 0
20:32:51.803 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 0
20:32:51.803 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegCircularBufferNIO - Seek: wence = 65536, offset = 0, readIndex = 0, returnValue = 1667373
20:32:51.803 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegStreamDetection - After avformat_find_stream_info() pos=0 bytes_read=1916055 seek_count=2. probesize: 877960 analyzeduration: 2259322.
20:32:51.803 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegStreamDetection - current container duration = 1.960022 seconds
20:32:51.804 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegStreamDetection - FFmpeg stream detection done in 2052ms,
20:32:51.804 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegTranscoder - Initializing FFmpeg transcoder stream output.
20:32:51.805 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegContext - Primary:
Input #0, mpegts, from 'input-mpeg-ts.ts':
Duration: 00:00:01.96, start: 77240.349511, bitrate: 6805 kb/s
Program 2
Stream #0:0[0x86a], 26, 1/90000: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv), 1920x1080 [SAR 1:1 DAR 16:9], Closed Captions, max. 25000 kb/s, 29.97 fps, 29.97 tbr, 90k tbn, 59.94 tbc
Stream #0:1[0x86b](eng), 25, 1/90000: Audio: ac3 ([129][0][0][0] / 0x0081), 48000 Hz, 5.1(side), fltp, 384 kb/s
Stream #0:2[0x86c], 0, 1/90000: Unknown: none ([134][0][0][0] / 0x0086)
Stream #0:3[0x86d], 0, 1/90000: Unknown: none (ETV1 / 0x31565445)
Stream #0:4[0x86e], 0, 1/90000: Unknown: none (ETV1 / 0x31565445)
Stream #0:5[0x86f], 0, 1/90000: Unknown: none (ETV1 / 0x31565445)
Stream #0:6[0x870], 0, 1/90000: Unknown: none (ETV1 / 0x31565445)

20:32:51.805 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegContext - Calling avformat_alloc_output_context2
20:32:51.805 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegContext - Primary:
Output #0, mpegts, to 'F:\TV\DinersDriveInsandDives-S16E05-SavorySensations-3901287-0.ts':
Stream #0:0, 0, 1/90000: Video: mpeg2video, yuv420p(tv), 1920x1080 [SAR 1:1 DAR 16:9], q=2-31, max. 25000 kb/s, 90k tbn, 59.94 tbc
Stream #0:1(eng), 0, 1/90000: Audio: ac3, 48000 Hz, 5.1(side), fltp, 384 kb/s

20:32:51.805 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG FFmpegTranscoder - Writing header
20:32:51.806 [FFmpegTransSageTVConsumerImpl-199CT-HDHomeRun Prime Tuner 13212AA5-2] INFO FFmpegTranscoder - Initialized FFmpeg transcoder stream output.
20:32:53.147 [SageTVRequestHandler-172CT-HDHomeRun Prime Tuner 13212AA5-2] DEBUG SageTVRequestHandler - Replied: 'OK'
20:32:53.997 [SageTVTuningMonitor-64] DEBUG HDHomeRunControl - key: '/tuner2/vstatus' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.102
20:33:14.005 [SageTVTuningMonitor-64] INFO SageTVTuningMonitor - 'DCT-HDHomeRun Prime Tuner 13212AA5-2' produced first 19140 packets.
20:33:14.005 [SageTVTuningMonitor-64] INFO SageTVTuningMonitor - 'DCT-HDHomeRun Prime Tuner 13212AA5-2' recorded first 22676748 bytes.
Reply With Quote
  #15  
Old 09-06-2017, 05:16 PM
EnterNoEscape's Avatar
EnterNoEscape EnterNoEscape is offline
SageTVaholic
  
Join Date: Jun 2010
Location: Harrisburg, PA
Posts: 2,657
Quote:
Originally Posted by Foggy View Post
EnterNoEscape, Thanks for your hint.

Network Discovery (UPnP-In and Out) for the Domain was disabled (Public was also disabled, Private was enabled)

I enabled UPnP-In and UPnP-Out for the domain and SageTV seems to be working better.

I suspect this firewall rule change might have happened when MicroSoft pushed their last update a few weeks ago.

The below log does contains some interesting messages but no errors.

INFO mpegts - [378eb0c0] decoding for stream 0 failed
INFO FFmpegStreamDetection - Desired program set. Stream details unavailable for one or more streams. Trying again with an extended probe.

WARN mpegts - [378eb0c0] PES packet size mismatch
These are perfectly normal messages, especially towards the start of a stream. It's common to have incomplete data because you're starting essentially at some random spot in the middle of a stream.
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache).
Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI.
Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom).
Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Halt detected in recording, end up with mpg and ts gprichardson1 Hardware Support 1 06-17-2014 07:58 AM
Halt Detected in recording PiX64 SageMC Custom Interface 18 04-13-2010 06:03 PM
Halt Detected In Recording vrscdx Hardware Support 43 03-05-2010 09:14 AM
Halt detected in recording loonsailor SageTV Software 0 08-12-2009 12:14 PM


All times are GMT -6. The time now is 04:31 AM.

Contact Us - SageTV, LLC - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.