Can't get channel changing to work

[les_bloom]

Hi there,

I have 2 HDPVRs and 2 Dish Network STBs.

I am using a USBUIRT with multizone setup.

I have my .ir files configured so that one has the Z1 tag and the other has the Z2 tag.

I have a 1/8" stereo to 2x 1/8" mono splitter on the back of my USBUIRT. From the 1/8" mono jacks I have 2x IR blasters connected. I used the IR blasters that came with my HDPVR and they are 3/32" so I have them connected to a 1/8" stereo to 3/32" stereo converter before they plug into the splitter on the USBUIRT .... I hope I explained that properly, it seems to read awkwardly

Anyways, when I test an IR code from within Sage I see the Z3 light on the front of the USBUIRT flash but neither of the Z1 or Z2 lights on the IR blasters
flash. This is true for both of my .ir files. I have tried changing the .ir files to use Z3 or ALL, but I get the same results.

My USBUIRT has a 'z' after it's serial number so I know it supports multizones. And I have the latest drivers installed from the USBUIRT website. When I look in device manager I find this info: driver number is 2.4.16.0 from 2/17/2009 and I am using Windows7 64bit.

I have attached my .ir files just in case.

Any help would be appreciated, I have not been able to get my TV viewing working at all =/

Thank you
Les