Hauppauge Colossus HD-PVR - Page 65

jptheripper · #**1281** 05-31-2011, 05:28 PM

Quote:

Originally Posted by sleonard

More confidant than I would be if they had said "What problem?"

S

On a scale of "where's the any key" to "there is a memory leak in the 64bit windows driver on line 523 resulting in a array out of bounds condition that has been trapped for and resolved" my confidence is somewhere in the middle.

metzz71 · #**1282** 05-31-2011, 06:40 PM

Ok, then maybe this will help me. Can someone tell me a configuration with two colossus and sage that works? If I can't have a driver that works with my config, I will change my config. "If we don't meet your standards, lower your standards"

mistergq · #**1283** 05-31-2011, 09:40 PM

Quote:

Originally Posted by metzz71

Ok, then maybe this will help me. Can someone tell me a configuration with two colossus and sage that works? If I can't have a driver that works with my config, I will change my config. "If we don't meet your standards, lower your standards"

I think if you are using component with RCA audio, that should be pretty stable, also assuming you are using Windows XP. Also, may need daily reboots.

metzz71 · #**1284** 06-01-2011, 05:52 AM

Quote:

Originally Posted by mistergq

I think if you are using component with RCA audio, that should be pretty stable, also assuming you are using Windows XP. Also, may need daily reboots.

I am Win7 x64 with rca audio, component, an ZERO daily reboots. I am stable, no problems, unless i hookup toslink. Would really like to have 5.1, stereo blows in HD.

So, from the lack of responses, I can only gather that NO ONE has 5.1 working with component??

jptheripper · #**1285** 06-01-2011, 07:13 AM

absolutely incorrect. Lots of us have optical working just fine.

I reboot about once a week.

metzz71 · #**1286** 06-01-2011, 07:20 AM

Quote:

Originally Posted by jptheripper

absolutely incorrect. Lots of us have optical working just fine.

I reboot about once a week.

So???? what is your config with optical working? Optical and component with two colossus? OS? Who is your provider?

bmh · #**1287** 06-01-2011, 07:44 AM

Quote:

Originally Posted by jptheripper

absolutely incorrect. Lots of us have optical working just fine.

I reboot about once a week.

my optical audio works fine until the audio format changes (i.e. commercials). At that point, the video loses sync with the audio until the channel is changed or the recording ends.

bits · #**1288** 06-01-2011, 08:07 AM

Quote:

Originally Posted by metzz71

So???? what is your config with optical working? Optical and component with two colossus? OS? Who is your provider?

Optical audio works fine for me as well.

One Colosuss, one HDHR, Win7 32Bit, Cableone, 2-5 Colosuss recordings per day, SageService restart daily, the original Colosuss driver(first one that came out), (3) HD200/300 extenders

jptheripper · #**1289** 06-01-2011, 08:29 AM

Only one here also, sorry.

One colossus (component + optical), one 2250, one 1600, one 1800. Comcast, Win Vista 32bit ultimate.

Settop locked to dolby digital and 720p always.

Latest driver for colossus, hd300 on February firmware, hd100 on latest firmware,

Restart about once a week.

metzz71 · #**1290** 06-01-2011, 10:04 AM

Ok, interesting, does anyone have two colossus with optical and component?

bmh · #**1291** 06-01-2011, 11:18 AM

It would be nice to know if Hauppauge is looking into the issues some of us are having (audio sync, blue screens). I noticed on their Facebook page that someone was having problems with their 2250 and they promptly posted an updated driver.

metzz71 · #**1292** 06-01-2011, 11:36 AM

FWIW, i just spoke with tech support and they told me two cards in one machine is not supported, hope to be in the future, but not as of right now. He told me to take one card out and see if the sync issue is resolved.

KeithAbbott · #**1293** 06-01-2011, 12:00 PM

Quote:

Originally Posted by metzz71

FWIW, i just spoke with tech support and they told me two cards in one machine is not supported, hope to be in the future, but not as of right now.

Maybe Hauppauge should have called it "Potentially Colossus".

SWKerr · #**1294** 06-01-2011, 04:23 PM

Quote:

Originally Posted by metzz71

FWIW, i just spoke with tech support and they told me two cards in one machine is not supported, hope to be in the future, but not as of right now. He told me to take one card out and see if the sync issue is resolved.

I have 2x Colossus running running via HDMI on DirecTV H20s without significant issues. Also have a HDHR and a AverMedia M780 for OTA reception.
I do have a scheduled nightly Therapeutic Reboot.

Spec:
OS: Win7-64
Gigabyte GA-890GPA-UD3H with AMD Phenom II X3 and 4GB RAM
60GB SSD Boot, (RAID5) 5x 1.5TB, 2TB Backup Drive
System supports 5x SageTV Clients (only 2x heavily used)

Before I had 2x HD-PVR running well. Swapped a HD-PVR for the Colossus and had issue until the latest driver and SageTV update. Ran stable for a few weeks then swapped out the other HD-PVR for a second Colossus. In about 3 weeks I have had one incident where one Colossus was not working in the morning after the nightly reboot. Cycling the system fixed the issue.

jptheripper · #**1295** 06-01-2011, 06:20 PM

Quote:

Originally Posted by SWKerr

I have 2x Colossus running running via HDMI on DirecTV H20s without significant issues. Also have a HDHR and a AverMedia M780 for OTA reception.
I do have a scheduled nightly Therapeutic Reboot.

Spec:
OS: Win7-64
Gigabyte GA-890GPA-UD3H with AMD Phenom II X3 and 4GB RAM
60GB SSD Boot, (RAID5) 5x 1.5TB, 2TB Backup Drive
System supports 5x SageTV Clients (only 2x heavily used)

Before I had 2x HD-PVR running well. Swapped a HD-PVR for the Colossus and had issue until the latest driver and SageTV update. Ran stable for a few weeks then swapped out the other HD-PVR for a second Colossus. In about 3 weeks I have had one incident where one Colossus was not working in the morning after the nightly reboot. Cycling the system fixed the issue.

I think i have a hardware man-crush

metzz71 · #**1296** 06-01-2011, 07:42 PM

Whoa, removed a card. STILL have the sync issue. I'm not doing anything tonight, may as well try Win7 x32. Wish me luck!

korben_dallas · #**1297** 06-01-2011, 09:25 PM

Quote:

Originally Posted by SWKerr

OS: Win7-64

Before I had 2x HD-PVR running well.

Did you have both of them on Component + Optical Audio, simultaneously?

SWKerr · #**1298** 06-01-2011, 09:29 PM

Quote:

Originally Posted by korben_dallas

Did you have both of them on Component + Optical Audio, simultaneously?

When I was running the 2x HD-PVRs they were Component and Optical. Almost never had issues.
On an older server using WHS I did end up with an external USB card for one of the HD-PVRs but they were stable on the current rig with all stock USB hardware.

metzz71 · #**1299** 06-01-2011, 10:41 PM

No dice. x32 win7 pro, same audio sync issues. does anyone think it may be related to audio setup/drivers and/or audio over hdmi? I have an nvidia 9500gt with a gigabyte board sending out audio. This is constant between sage and Showbiz. Just thinking out loud.

korben_dallas · #**1300** 06-02-2011, 12:58 AM

Quote:

Originally Posted by metzz71

No dice. x32 win7 pro, same audio sync issues.

What STBs do you have?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PVR-150 and PVR-250 together with hauppauge 45-button remote	eallen	Hardware Support	0	03-16-2009 06:28 PM
Hauppauge PVR-350 Silver Remote conflicts with PVR-150MCE	mayamaniac	Hardware Support	45	08-19-2006 07:53 PM
Hauppauge PVR-250 w/ PVR-500MCE	Truxton	Hardware Support	3	11-24-2005 02:17 PM
Wintv pvr 150 vs the USB2 PVR from hauppauge?	steingra	Hardware Support	9	10-14-2005 02:23 PM
Hauppauge PVR-350 & PVR-500 coexisting?	rwc	Hardware Support	7	01-19-2005 01:48 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)