|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
FIOS STB and Firewire question
Just got FIOS installed like 2 weeks ago. Now I want to set them up for firewire channel changing. I have 2 ports available on a 3 port firewire 800 card that I also have my Drobo connected to. I installed the Tim Moore firewire drivers and rebooted, and then I plugged in one of the STB's -- the device manager tries to install 2 Motorola (null) devices and then that's it -- no AV Panel and no Tuning Device. So I see around here that other people have gotten FIOS firewire changing working -- any ideas. Its a win2k3 box, which shouldn't matter. The only thing I can think of is that I am using the Unibrain firewire drivers for my firewire card instead of MS, maybe that is messing up the detection. And I do believe that some users on here have the QIP7100's setup, so I don't think its that unless they never fully enabled my boxes for firewire -- anyone have to call Verizon to get that feature turned on?
__________________
SERVER: Dual Core Xeon 3.0GHz 5160, 8gb RAM, Win7 x64, SageTV 9.0.13.536 w/ BMT, WebUI, OpenDCT, Java 1.70_79 TUNERS: 2 x Ceton PCIe InfinitiTV - FIOS STORAGE: UNRAID - 8tb for archived shows, DVDs, pictures and music CLIENTS: 2 x HD200s, 2 x HD300 |
#2
|
||||
|
||||
If firewire isn't enabled on your STBs, calling Vz won't you do you any good unless you swap the boxes. There's no way for them to remotely enable/disable individual features -- it's all in the firmware.
__________________
SageTV Server 7.1.x w/Gemstone and Plex Home Theater v1.0.10 w/PlexPass
HD-PVR w/v1.5.6 drivers / Hauppauge IR blaster / FiOS Extreme HD / Motorola QIP6200 / SPDIF+720p Fixed Output on HP Media Center 8400F (Phenom 9500 QuadCore 2.2GHz, nVidia GeForce 8500 GT) via Olevia 247TFHD/Onyko TX-SR606/Harmony 550/HP MediaSmart EX490 WHS w/12TB Plex Media Server v0.9.9.5 on HP Touchsmart Envy 23 d16qd Sonos Play:3, Connect / SimpleTV v2 / Roku 2 XS+Plex / iPhone 5 / iPad 2 |
#3
|
|||
|
|||
an update
changed the drivers out from unibrain to ms and did another reboot and the boxes showed up just fine. But now the issue is that I can't do 4 digits. It can do 3 just fine but if you do 4 it goes crazy and starts putting in numbers repeatedly. Have to unplug and replug the firewire just to get the thing to do 3 digits right again. My code is -- channel -f 3 901 -- I tried -a4 and -a6 as others suggested and it spits back errors, so this command works just fine and consistently, but just not with 4 digits. Now however if I do --- channel -f a0 3 1800 it works perfectly, but if I try and do that with 3 digits it doesn't like that either.
__________________
SERVER: Dual Core Xeon 3.0GHz 5160, 8gb RAM, Win7 x64, SageTV 9.0.13.536 w/ BMT, WebUI, OpenDCT, Java 1.70_79 TUNERS: 2 x Ceton PCIe InfinitiTV - FIOS STORAGE: UNRAID - 8tb for archived shows, DVDs, pictures and music CLIENTS: 2 x HD200s, 2 x HD300 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1x HD-HomeRun + 2x HDPVR + 2x FIOS STB-HD | mudgod | Hardware Support | 10 | 11-18-2010 06:32 PM |
FIOS users - New STB in beta | TallMomof2 | General Discussion | 3 | 09-08-2010 11:26 AM |
Question about using Firewire to power cycle my STB | SDeGonge | Hardware Support | 2 | 06-01-2010 06:15 AM |
Verizon FiOS Firewire | ChaOConnor | Hardware Support | 1 | 03-20-2009 06:08 PM |
Verizon FIOS QIP2500-3 STB with SageTV | killerkhan | Hardware Support | 9 | 02-27-2008 09:11 PM |