Audio out of Sync

[Danimal]

I recorded a show and when played back the audio is out of sync on tv play back. Playback watched at the same time on monitor is ok ???

Any idea's would be appreciated.


Sage TV Trial Version 1.4.10
AMD 1100 Athlon
512MB
Geforce 4 MX440se
PVR-350 using svideo out to tv
SB Live Value
Asus A7V Mobo
Dlink DWL-G520

PS - The tv-out quality on the PVR350 is PROUD !!!

Danimal

[stanger89]

Are you using your soundcard's audio out or that of the 350? I'm guessing you're using a SW decoder for the audio and between that and your soundcard the audio is getting behind the video on the 350.

Have you tried adjusting the audio sync setting, in Audio setup I think? Or, you could try setting the 350 as the audio output.

[Danimal]

Ok, I did have my speakers plugged into my sound card. I plugged them into the output of the 350 & now she is in sync.
You the man!

Im sold on SageTV now. I can't wait for Ver2 so I can see the GUI with the 350's out.
I have tried Beyond & XP Media Center. After seeing the PIC Quality difference from my GeForce4 MX S-Video to the 350's output I can't go back. Nuked Media Center same day of install.

One question,

With version 2 will the menu system show on the output of the 350? Or only onsceen GUI during Live TV?

Thanks for the help.

Danimal

[mlbdude]

All the Sage menu's show out the 350. Only thing that won't go out is encrypted MPEG2 (DVD) or anything other than MPEG2 from withing Sage.

[Danimal]

I just noticed now that I have my speakers plugged into the output of the PVR350 I no longer have control of the volume

Thanks for the info on the menus. If you ran something like AnyDVD do you think its possible to playback a dvd through Sage and the 350?

http://www.slysoft.com/en/anydvd.html

Danimal

[stanger89]

That would take care of the encryption, but the audio would still be AC3 which the 350 can't handle, you'd get video but no audio.

Have you tried adjusting the audio sync settings and using the soundcard's output?

[Danimal]

I will give that a go and report back.

Thanks,

Danimal

[Danimal]

I now have the audio out of the 350 going to the input of the sound card & the speakers plugged into the output of the sound card. So far so good. If this doesn't work out I will play with the audio delay within Sage.

Thanks

Danimal