![]() |
|
|||||||
| Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
|||
|
|||
|
3 tuner server help
Im going to be setting up a sever with some spare parts I got sitting around.
P4 1.8 ghz ati 9600 aiw 512 meg ram and a hard drive I will also be hooking up a adaptec usb dual tuner that I got with a HP MCE. Going to have to use xp mce as an OS as the usb tuner has problems with whs/2003 or vista. Right now I have a test system working on an old laptop with comparable hardware with HIP and exemultituner plugin as it is using a STB. The video is a little pixely coming over the internet, but I am hoping the desktop cpu will provide a little more transcoding juice. Now I need a little help on how to set up the extra tuners Im going to have available. They are going to be straight analog no STB. One connected to the left over tuner on the adaptec usb and one to the ati aiw. I know I can just go to source setup and select tuner and download the guide, but how do you know what tuner is in use? Can you set a preference order? can you restrict placeshifter accounts to use specific tuners? I would need to use the 1st one with the STB primarily, but when tuning in from other placeshifters when that one is in use it would then need to use the 2nd usb tuner, and lastly the software tuner on the aiw. |
|
#2
|
||||
|
||||
|
You can set priority for your tuners with encoder_merit in your properties. Here are a couple of links that speak more directly to it:
http://forums.sagetv.com/forums/showthread.php?t=24948 http://forums.sagetv.com/forums/show...=encoder_merit Basically, just set the tuner that is hooked to the STB to a higher merit. Also, be cognizant of your physical coax topology. Depending on how your feed is coming in and how many times you split that signal you’re going to lose PQ. |
|
#3
|
|||
|
|||
|
Thanks Ill look into it.
I should have a 15-20 dB input so Ill be good. + I have the ability to get seperate drops @ the same levels. Only issue ill have is if my hardware we be good enough to serve up the feeds. |
|
#4
|
|||
|
|||
|
The P4 1.8ghz is a pretty weak CPU. Using that for transcoding for serving over the 'net is going to be a bit difficult (It may be fine, but the P4 was a dog of a CPU especially anything below 2.0ghz). Also you have to remember that much of the issue with serving video via the internet has to do with your upload speeds. I know my ISP lets me download at 4mbps+, but my upload is only about 512kbps which means any placeshifting I do is considerably compressed.
__________________
Sage Server: AMD Athlon II 630, Asrock 785G motherboard, 3GB of RAM, 500GB OS HD in RAID 1 and 2 - 750GB Recording Drives, HDHomerun, Avermedia HD Duet & 2-HDPVRs, and 9.0TB storage in RAID 5 via Dell Perc 5i for DVD storage Source: Clear QAM and OTA for locals, 2-DishNetwork VIP211's Clients: 2 Sage HD300's, 2 Sage HD200's, 2 Sage HD100's, 1 MediaMVP, and 1 Placeshifter |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| need help getting tuner working on server 2008 | Mav | Hardware Support | 6 | 06-14-2009 12:33 PM |
| What/How for 4-tuner network server? | kbro | General Discussion | 15 | 01-28-2009 06:32 PM |
| SageTV Recorder as only tuner server? | GollyJer | SageTV Software | 12 | 11-27-2006 07:17 PM |
| single tuner locking channel in server/client setup | edgley | SageTV Software | 1 | 09-30-2004 09:47 AM |
| 3 Tuner Sage Server Specs? | SoonerToucan | Hardware Support | 9 | 08-31-2004 08:11 PM |