sagetv and usb-uirt

[npereira]

how do I control sagetv with the USBUIRT and my harmony remote?

[npereira]

i found how to program the harmony with sagetv, but the problem im having now is that the usbuirt is repeating twice any thing i do with the remote...

[gplasky]

If it is a new Harmony choose to set it up on the Harmony site as various remotes. You could choose a Hauppague remote from the PVR150 or a MCE remote. Once you have defined and downloaded the remote you want to your Harmony then you will go to Setup-Detailed Setup-Commands-Link Infrared/Keystroke to Sage Command. And with your Harmony remote as close to the USB-UIRT as practical (inch or two) choose the command to link to and press the button you want to use for that command. You may have to link each button twice becase ot could generate to codes for each button (pressed and released). You'll know because you'll see 2 different codes for the same command and button if you do it twice.

Gerry

[gplasky]

Originally Posted by npereira

i found how to program the harmony with sagetv, but the problem im having now is that the usbuirt is repeating twice any thing i do with the remote...

Reconfigure your Harmony software and slow down the speed. In the Harmony software tell it it is not working like you want it to and it will give you a list of things wrong. One of them is the repeaating command problem. Just follow the steps.

Gerry

[npereira]

ok, but with the USBUIRT, when I go into my sources, i was told the USB URIT has 3 outputs, 1 in the front of the module, 2 and 3 on the 1/8" connector which I only have 1 imitter connected to it. SO I want the base to control the Satelite receiver, and the imitter to control my digital STB.

But sage only gives me 1 option which is motorola something....

[npereira]

ok i did what you just said, and now I need to press twice on each button for it to take... I simply dropped it down 1 as the harmony software said...