SageTV Community  

Go Back   SageTV Community > SageTV Products > SageTV EPG Service
Forum Rules FAQs Community Downloads Today's Posts Search

Notices

SageTV EPG Service Discussion related to the SageTV EPG Service used within SageTV. Questions about service area coverage, channel lineups, EPG listings, XMLTV, or anything else related to the service or programming guide data for SageTV should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-10-2007, 10:15 PM
btrcp2000 btrcp2000 is offline
Sage Fanatic
 
Join Date: Aug 2007
Posts: 888
Channels activated in setup but do not appear in EPG?

I have a firewire STB setup, works great for stuff like ESPN, Discovery HD, etc., but my locals are missing. They're available for me to select in the sage channel setup screen, and they all have a green dot, but they don't show up in the epg. I have tried activating/deactivting, but no result.
__________________
[size=1]Current Server:V9 UNRAID Docker, SuperMicro x9dri-LNF4+, 32 GB ECC, 2x Xeon e5-2660v2, storage array 6TB, 2 Dish r5000HD tuners, 1 HDHomerun Quatro, 1 HDHomerun Extend
4 Nvidia Shield TVs with Miniclient
Reply With Quote
  #2  
Old 12-10-2007, 10:29 PM
Opus4's Avatar
Opus4 Opus4 is offline
Administrator
 
Join Date: Sep 2003
Location: NJ
Posts: 19,624
Check the note at the bottom of the Program Guide page in the SageTV manual -- around p. 46 or so.

- Andy
__________________
SageTV Open Source v9 is available.
- Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1.
- Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus
- HD Extenders: A) FAQs B) URC MX-700 remote setup
Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request.
Reply With Quote
  #3  
Old 12-11-2007, 07:01 AM
btrcp2000 btrcp2000 is offline
Sage Fanatic
 
Join Date: Aug 2007
Posts: 888
I assume you are referring to the idea that they are already combined with the other channels that are assigned for the locals. I thought of that, but I guess I expected to see them separately because of the way I have my channel lineups set up. I use my actual Time Warner digital lineup for the STBs of course, and the locals are listed there in the 700 range, but do not show up in the guide. I also have set up a secondary digital lineup from a couple towns over because that's the only way I can correctly remap all of my OTA channels. It is that lineup that shows my locals in the epg in the 900 range.

If I understand correctly, has sage figured out that 706 and 906 are both CBS for example, and therefore both do not show up in the guide? If that's the case, why do my OTA channels show up by themselves?
__________________
[size=1]Current Server:V9 UNRAID Docker, SuperMicro x9dri-LNF4+, 32 GB ECC, 2x Xeon e5-2660v2, storage array 6TB, 2 Dish r5000HD tuners, 1 HDHomerun Quatro, 1 HDHomerun Extend
4 Nvidia Shield TVs with Miniclient
Reply With Quote
  #4  
Old 12-11-2007, 11:22 AM
Conejo Conejo is offline
Sage Expert
 
Join Date: May 2006
Location: California
Posts: 645
Plucked from another post:

Quote:
Originally Posted by ke6guj View Post
OK. What Sage will do is take all the EPG data and combine it into 1 list. Each channel name will be listed once, where in the list will vary. But Sage would have access to it from all sources that have it, even if it doesn't show up in the "proper" channel range.
If a Station Call Letter ID already exists but is available from two or more sources (Cable Analog, Cable Digital simulcast, OTA, SAT) then ONLY ONE channel is elected to represent that station in the EPG lineup. It's based on the Station Call Letters, not the Logical of Physical Channel No.
As stated previously, SageTV knows where to go to get the show. An analogy would be buying microwave popcorn. The same brand is available from MANY stores. You just buy it from the one most convenient at the time. You list it on you grocery list just once and buy it when you find it.

[/recycled goods]
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
many HD channels....what now? garyellis SageTV Software 10 10-29-2007 02:23 PM
Set top stoped changing channels kck Hardware Support 5 06-06-2007 09:04 AM
My EPG Experience... Azam SageTV EPG Service 6 04-10-2007 10:21 AM
EPG and QAM Channels harrijay SageTV Linux 0 03-11-2007 10:19 AM


All times are GMT -6. The time now is 11:51 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.