Sage looses IRMAN after standby

[Franc]

Playing around with letting my Sage machine going to standby (and testing whether it will come back for a scheduled recording).
It seems to come back, at least for manual recorded, which I tested, but my remote doesn't work after that.
I use an IRMAN on COM1 with a couple of remotes. Works fine, but not after standby. When I stop and restart SageTV (I use the service mode) my remote works again.
Something easy to fix this? Like autorestarting Sage after coming back from standby or could this be fixed in another way?

[Franc]

Noone experienced this or found a solution?

I switched to hibernation, which also works fine, except for the IRMAN loosing focus again.

Is there an easy way to restart SageTV at wakeup?

[Franc]

Okay, looks like I have solved the problem

Through this thread: http://forums.sagetv.com/forums/showthread.php?t=16522

I removed all parts about stopping and starting the Hauppauge IR software because all I need is to restart Sage at resume and it seems to work fine.
Doesn't do anything when going into hibernation (leaves Sage running), but stops and starts Sage on Resume, which gives me fullscreen Sage again and control with the remote.

Great stuff, thanks to the original author, amac.
Maybe this is useful for someone else too.

Franc.