![]() |
|
SageTV Media Extender Discussion related to any SageTV Media Extender used directly by SageTV. Questions, issues, problems, suggestions, etc. relating to a SageTV supported media extender should be posted here. Use the SageTV HD Theater - Media Player forum for issues related to using an HD Theater while not connected to a SageTV server. |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
AUUUGH I Give UP!!!
OK, I have been trying for days to get this MVP player working. I have left several issues in other threads and am not going to regurgitate it here. I thank you for all of your help, but I belive this issue is related directly to the router that I am using (DGL-4300) I think SageTV has a lot of issues yet to iron out with this router/MVP combo. Unfortunately, I have already registered my MVP Client and am out the $30....water under the bridge. I need to get this MVP working!
I have heard many of you refer to Matt's plugin and I would like to give that a try with my MVP. Whats a good link to read up on this plugin? Any other ideas for a client I should check out? I have tried the Hauppage software that came out with the MVP. Although it works, its far from ideal. Sage support, admins, employees....please polish this software. IF it worked like its advertized, I would buy 4 more of these things. |
#2
|
|||
|
|||
The DGL router has a bug, the next version of SageTV will include a workaround.
_Demo_ |
#3
|
|||
|
|||
I give up too!!
Just bought an MVP from Sage and have also been pulling my hair out. I sincerely hope Sage gets this software fixed.
|
#4
|
||||
|
||||
I just got a MVP, plugged it in and it is working great. I get a freeze every now and then (maybe once per 2 hours), but other than that I'm extremely happy. The video quality is the best I have seen and the speed is pretty good. I just wish it played Divx movies.
|
#5
|
|||
|
|||
Quote:
Thanks for the update Demo. When can we expect a release? Is there something I can help you test out? PM me if you would like a beta tester. By the way, Nigfink makes a good comment, can we expect Divx support any time soon? |
#6
|
|||
|
|||
I would think that this warrants another beta release of 4.14, even the rest of it isn't finished yet.
|
#7
|
|||
|
|||
Actually, I think it's pretty nice of them to work around a bug in the router, rather than expecting the guys who made the router to fix their problem. Meanwhile, how about a better router?
|
#8
|
|||
|
|||
This is quite a good router, but those devices run software, thus there are bugs.
|
#9
|
|||
|
|||
Its actually its a great router....one of the best I have ever used. But Sage IMO did go above and beyond in the form of customer service. Demo sent me a Alpha load and it fixed everything right up. He was very responsive and helpfull. Now I hate to act like a spoiled child, but if they could only get Divx support, I would be happy as a clam. Thanks Sage!
![]() Last edited by TripleTapper; 01-01-2006 at 09:33 AM. |
#10
|
|||
|
|||
I ordered a new MVP yesterday, after selling two of them last summer..
|
#11
|
|||
|
|||
Linksys router also doesn't work correctly
The problem is not limited to any specific brand of router. My Linksys router also does not appear to work correctly with the Sage application for the MVP. Since the Happauge firmware application and Matt's client do work properly, I hardly am suspicious of the router. I believe the Sage MVP binary application has a bug (or two) and needs to be fixed. Doing a lot of router measurerments and comparisons will hopefully help isolate the software bug.
Larry |
#12
|
|||
|
|||
Quote:
What Linksys router are you using? I am using a Linksys BEFSR41 with no problems. I am also using a Linksys EZXS55W switch with no problems. Of course, both of these are wired Cat5E. Steve |
#13
|
|||
|
|||
Lynksys router
I also use a Linksys router, and had relatively good experience with Matt's plugin. I had serious stuttering on both hard-wired and wireless mvps after upgrading to the built-in sage mvp client. I upgraded the firmware in my Linksys router, and noticed significant improvement. I upgraded the router again, using third-party firmware (the most recent version of tofu's version of HyperWRT), and am extemely pleased with the result. It made a dramatic improvement.
|
#14
|
|||
|
|||
Steve,
I have the same Linksys router, also wired cat5e. As you may be aware, there are several firmware revs for this router. I recently flashed the router with the latest firmware since it was neccesary to allow the router to be used reliably with some Apple video conferencing software called iChat. Perhaps we have different firmware revs. My earlier point is that 2 other client GUIs run in the MVP extender box with this router, yet Sage does not. I don't think the router is at fault, although there sure seems to be some subtle dependency on router performance. Larry |
#15
|
|||
|
|||
Quote:
Last edited by blade; 01-01-2006 at 07:49 PM. |
#16
|
|||
|
|||
Larry,
The question was more curiosity on my part than anything else. You are correct that I am running an earlier firmware and I do agree that it makes sense that there would be extender dependency on the routers performance. Hopefully the alpha provided by Demo will help you as well. You might contact tech support to see. Regards, Steve |
#17
|
|||
|
|||
You might want to check if your routers that have problems are using QoS for anything. If so, it may be throttling the bandwidth to the MVP. Try exempting the ports the MVP users or put them at a higher priority. I am using 2 Linksys WRT54GS with 2 MVPs. One MVP hardwired to my main router, one wired to the 2nd router which acts as a Wireless Bridge. Both MVPS work great, however, because I use QoS to control bandwidth to certain applications, I had to put the ports the MVP use at the highest priority, then the problems went away.
|
#18
|
|||
|
|||
I'm anxious to try the suggestion of raising the Qos for the ports used by MVP.
What specific ports are used? Thanks very much, Larry |
#19
|
|||
|
|||
Somebody posted a list in one of the other threads.
|
#20
|
|||
|
|||
Quote:
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|