|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
theatre 550 pci express
I am considering buying one of these for use with sage
http://www.powercolor.com/global/pro...0pro_pcie.html According to the main web page Sage supports the theatre 550 chipset - will the pci express version be supported as well? Will it require an update or will it be supported by the current version? thanks |
#2
|
|||
|
|||
ahem
*bump* Also will the Haupaugge HVR 1100/1300 be supported by Sage? |
#3
|
|||
|
|||
I don't think a lot (if any) users are familiar with this. Maybe email Sage support?
P |
#4
|
|||
|
|||
sorry I thought that this was the right place to ask. I'll mail support as you suggest and update this thread with the answer
cheers |
#5
|
|||
|
|||
No worries This forum is user to user...just didn't want you to think you were being ignored.
P |
#6
|
||||
|
||||
I'm 99% sure that all the 550 PCIe should work out the boxs in SageTV as long ATI didn't change the DirectShow Interface by keeping the same main Stardard PCI DirectShow Interface.
By the way newegg.com has them PowerColor T55E-P03 Theater 550 PRO PCI-Express x1 Haupaugge HVR 1100 no it need support DVB card and as for the 1300 this kind of YES S-Video, Composite input and NO to DVB Tuner, but it all depnd on DirectShow Interface and Drivers. |
#7
|
|||
|
|||
sadly I live in the UK so I can't get one from newegg. If I did get an american capture card would it work in the UK (PAL) or would it only work with an NTSC source?
Last edited by pschweig; 11-15-2005 at 12:04 PM. |
#8
|
||||
|
||||
Quote:
|
#9
|
|||
|
|||
I just ordered one so I will let you know next week. OOPS week after that is Thanksgiving.
GeoffQ |
#10
|
||||
|
||||
ATI said that all 550 PCI/PCIe are dedicated to the broadcasting standard of the country it is sold in pschweig so sadly been you live in the UK you I can't get one from newegg sorry.
|
#11
|
||||
|
||||
Sage Support don't give good news on the HVR-1300:
**************************************** Unfortunately, that capture device is not supported. Here is a list of currently supported cards. http://www.sage.tv/requirements.html I also don't know if/ when it will be supported. **************************************** Does Sage support *any* DVB cards? Rgds, Rick |
#12
|
||||
|
||||
Rick as I said the 1300 may work with SageTV just not the Tuner part of it being it is base on DVB Stream where Analog S-Video/Composite input is conn to a Hardware Encoder which is the very some one found on 150, 250 and 500 card know as Conexant CX23416 but also as I said it all depnd on DirectShow Interface and Drivers for the 1300 and if look at the card it look very much like the reference design "Blackbird" by Conexant but as one more chip.
|
#13
|
||||
|
||||
Thanks, but I'm not sure I understand the answer! I'm a bit of a noob at this stuff. Are you saying that the hardware encoder isn't used with the tuner on the 1300? Because on Hauppauge's page it says:
"Record analogue or digital TV to your PC’s hard disk using the built-in high performance hardware MPEG encoder!" Or are you just saying that Sage supports the S-Video etc. but just doesn't ever support DVB feeds? Sorry for being daft! Thanks, Rick |
#14
|
||||
|
||||
Digital TV doesn't require encoding since it's broadcast as an MPEG-2 stream. And yes, Sage doesn't currently support DVB.
|
#15
|
||||
|
||||
So when I have my freeview box, scart out to S-Video on a 350 card, we're going digital-analogue-digital?
And using like a Nova-T card on PCI with GBPVR, you don't need a hardware encoder at all? It can record directly? Every day I realise how little I know! Rick |
#16
|
||||
|
||||
There is a thread for BDA DVB Network Encoder, but I have no idea whether it can be used for what you are talking about... I'm just poiting it out as something to look into.
- Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request. |
#17
|
||||
|
||||
Quote:
Looks like I need to stick to analogue to use Sage...but doesn't it seem weird that Sage doesn't use something as common as a DVB card, when it has to make sense to skip the analogue stage? Rick |
#18
|
||||
|
||||
DVB, HDTV, Sat have few diff type data transmission which are close to MPEG-2 but not common stardard MPEG-2 stream and some case it an encrypted data transmission.
Yes that rigth digital-analogue-digital when ref to DVB, HDTV, DTV, Satellite or Digital Cable. |
#19
|
|||
|
|||
sage support confirmed for me that the pci express version of the theatre 550 should still work and will be supported
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|