|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
USB-UIRT & Hauppage Remote not working
Hi...
I just got my USB-UIRT today and have installed the drivers, etc. In both Girder and SageTV I can't use the same IR command twice in a row. For intance, under Sgae (after mapping the up key, for example), to move up twice, I have to press the up key four times. Same with Girder. If I set an event, it will learn the IR code, etc but will not respond to the event twice in a row. If I press different keys on the remote back to back, everything works OK. I have tried this with Sage (with no girder running -- just the Sage USBUIRT plugin) and with Girder running without Sage. This is happening with two different Hauppauge remotes (both the old one and the new 45-button remote). It is fine on another remote I swiped from a TV set Anyone have any ideas? PS: My UIRT is: USBUIRT0038-Z S/N 113338 |
#2
|
||||
|
||||
The Hauppauge remote uses a toggle bit IR protocol -- it alternates between 2 different codes sent for each button press. You have to learn each button twice in a row w/o pressing any other remote buttons in between.
- Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request. |
#3
|
||||
|
||||
Quote:
Second..... WHY?????????? Why is that (having toggling codes) a good thing? |
#4
|
||||
|
||||
Quote:
Obviously, this isn't a requirement for IR remotes, but it is what Hauppauge obviously chose to go with, so you just have to be aware of it when teaching the remote's codes to other software. - Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|