Help with multi tuner

[Aganerral]

I'm sure it's there somewhere but I did a quick search and couldn't find it:

I have 2 PVR 250 cards. 1 is hooked up to a cable feed, and the other hooked up to cable through a cable box. The USB UIRT seems to control the cable box just fine. THe problem I'm having is trying to figure out how to set up SageTV to know which channels can be gotten only through the box. When I set up the box and enable all of the channels, it seems to enable all the channels for BOTH feeds. So when I try tot go to HBO, it tries to switch to that channel on the direct cable feed and obviously can't get it there. How do I set it up so that channels above 100 are enabled only on the tuner connected to the box, but channels 2-100 available on both?

Thanks!

I should add this is on Sage 2.0, not 2.1 yet

[Cayars]

You need to have seperate EPG lineups for each type of board. For example what I did on my system to handle this was to select Digital Cable/STB for one tuner and select Basic Cable/Tuner for the analog channels.

Let me know if that's clear enough (very brief) or if you need more info. Basically you want to set one up with basic cable and one with digital or extended lineup. That will make SageTV set them up differently.

[Aganerral]

Hmm..I'm at work right now so can't check, but I might have given them the same listing. I'll try this when I get home. Thanks for the tip!