HDHomeRun (HDHR) Prime + SageDCT - Page 67

sflamm · #**1321** 08-27-2012, 02:40 PM

Code:

I've never been able to successfully tune a channel not listed on that page.

The entire page was blank at http://x.x.x.x/lineup.xml

After the soft reboot it was entirely filled.

Note the log file from the Prime had all the channel subscription info in it...

And everything was definitely working as was without that populated... only symptom was on re-tune boundaries.

I will check when I get home tonight to see whether the reboot / population solved the problem

Code:

The warning that you get from SageDCT is informational only, it still
 asks the DCT to tune it even if it's not in its list (the list is primarily used
 for "scanning" in SageTV).

I did not run a channel scan inside SageTV (I did do one in the HDHR config). In SageTV I simply manually configured a channel guide (enabled channels) which seemed to work. Should I have run a channel scan?

Quote:

But when I was seeing those errors a couple months ago, it was because the channel list on my CableCard would only be partially intact on occasion. It was a bug in the SiliconDust firmware that was the problem which they've since fixed.

I am still running the 20120405 firmware. I know there are several bug fixes like the IGMP multicast problem I discovered that have been fixed. But when I went to install the software it would not run on Windows 2003R2 because it currently has a DLL build problem.

It sounds like you have gone ahead an manually loaded/upgraded the firmware to the latest beta. I suppose I should do that too... has it made your system better or worse? a little reluctant to upgrade to a beta firmware when no downgrade is possible. let me know your thoughts.

babgvant · #**1322** 08-27-2012, 02:45 PM

Quote:

Originally Posted by sflamm

The entire page was blank at http://x.x.x.x/lineup.xml

After the soft reboot it was entirely filled.

Note the log file from the Prime had all the channel subscription info in it...

And everything was definitely working as was without that populated... only symptom was on re-tune boundaries.

I've never experienced that condition either. I'm surprised that it worked at all

Quote:

Originally Posted by sflamm

Should I have run a channel scan?

No. I got sick of all the "I scanned for channels and..." posts, so I faked it

Quote:

Originally Posted by sflamm

It sounds like you have gone ahead an manually loaded/upgraded the firmware to the latest beta.

I almost always load the latest beta firmware. Pretty sure I'm n-1 right now, but just because I haven't had a chance to load up the one that came out EOW.

sflamm · #**1323** 08-27-2012, 02:59 PM

Quote:

I've never experienced that condition either. I'm surprised that it worked at all

That is what I look for - to be a trailblazer, NOT!

Quote:

No. I got sick of all the "I scanned for channels and..." posts, so I faked it

I was pretty sure it didnt do anything

I remoted into home and checked the log file... sure enough the problem is still there despite the channel listing being fully populated at the Prime.

I went ahead and turned on verbose log. Will let that gather some info for you before I go and just upgrade the firmware. You never know it might help us diagnose something...

voorhees · #**1324** 08-27-2012, 09:36 PM

Quote:

Originally Posted by sflamm

But when I went to install the software it would not run on Windows 2003R2 because it currently has a DLL build problem.

I cannot get the last two beta updates to run after installing on WHS v1. Does it install OK, but will not run the executables? Do you get an error that the executables are not valid executables after install? Just good to hear this was just not me.

sflamm · #**1325** 08-27-2012, 09:51 PM

WHS v1 is a stripped down version of Windows 2003 R2 server. All these share the same XP kernel.

This is the same problem. The only thing to do right now is manually update the firmware for the Prime by loading the old 20120405 software, separately downloading the latest Beta firmware - only, and then manually updating.

phelme · #**1326** 08-27-2012, 11:26 PM

Quote:

Originally Posted by voorhees

I cannot get the last two beta updates to run after installing on WHS v1. Does it install OK, but will not run the executables? Do you get an error that the executables are not valid executables after install? Just good to hear this was just not me.

like sflamm said, it's a build issue. The latest Microsoft build tools, which SiliconDust just started to use, have dropped XP kernel support.

If this is going to be an issue for anyone here please let SD know as they are discussing how to proceed with future releases.

The more people let them know this is going to mess them over the more likely I won't have to upgrade to Windows 7 any time soon.

voorhees · #**1327** 09-03-2012, 12:12 PM

Quote:

Originally Posted by babgvant

It should.

babgvant, OK I guess I have no idea what I am doing, but I cannot get the VLC option to work wither on my WHS v1 server or on a Win7 SageTV install. Attached is a log from my Win7 install. I am assuming all I have to do is give it a path to the vlc.exe file, but I cannot get that to work. SageTV just halts when I do that. Any help would be greatly appreciated. Thanks.

nyplayer · #**1328** 09-03-2012, 03:16 PM

Quote:

Originally Posted by voorhees

babgvant, OK I guess I have no idea what I am doing, but I cannot get the VLC option to work wither on my WHS v1 server or on a Win7 SageTV install. Attached is a log from my Win7 install. I am assuming all I have to do is give it a path to the vlc.exe file, but I cannot get that to work. SageTV just halts when I do that. Any help would be greatly appreciated. Thanks.

You know I had the same problem I could not get it to work. I am using a 64 bit sagedct and 32 bit VLC I wonder if that is the problem. VLC would start then disappear after a while. My client would just hang on tuning.

babgvant · #**1329** 09-03-2012, 04:05 PM

Quote:

Originally Posted by voorhees

babgvant, OK I guess I have no idea what I am doing, but I cannot get the VLC option to work wither on my WHS v1 server or on a Win7 SageTV install. Attached is a log from my Win7 install. I am assuming all I have to do is give it a path to the vlc.exe file, but I cannot get that to work. SageTV just halts when I do that. Any help would be greatly appreciated. Thanks.

Does the file that vlc is asked to create appear?

I don't see the full sage recording life cycle in there, how are you testing?

Can you try from the SageDCT config tool?

babgvant · #**1330** 09-03-2012, 04:06 PM

Quote:

Originally Posted by nyplayer

You know I had the same problem I could not get it to work. I am using a 64 bit sagedct and 32 bit VLC I wonder if that is the problem. VLC would start then disappear after a while. My client would just hang on tuning.

Platform compilation isn't an issue because they are in different processes.

nyplayer · #**1331** 09-03-2012, 05:14 PM

Quote:

Originally Posted by babgvant

Platform compilation isn't an issue because they are in different processes.

That is good to know but I still cannot get it to work I will try again when I have a gap to do it on then post log.

voorhees · #**1332** 09-03-2012, 06:33 PM

Quote:

Originally Posted by babgvant

Does the file that vlc is asked to create appear?

I don't see the full sage recording life cycle in there, how are you testing?

Can you try from the SageDCT config tool?

I am testing using SageTV and asking it to play Live TV, and it just hangs with VLC enabled. I will try again and look for the file it is trying to create. How do I test from the config tool? Thanks.

babgvant · #**1333** 09-03-2012, 06:35 PM

Quote:

Originally Posted by voorhees

I am testing using SageTV and asking it to play Live TV, and it just hangs with VLC enabled. I will try again and look for the file it is trying to create. How do I test from the config tool? Thanks.

When you say that SageTV hangs, do you mean the UI process stops working?

There's a tab in the config tool that lets you send commands to the SageDCT tuner. In this case you want to send a "START" command w/ a valid channel and file path. Don't forget to send a "STOP" when done.

nyplayer · #**1334** 09-03-2012, 06:36 PM

Here is my log with VLC ... It hangs my clients... when watching live TV etc.. Makes my Server go crazy. Hard to shutdown and restart. Going back to no VLC.

babgvant · #**1335** 09-03-2012, 07:50 PM

Quote:

Originally Posted by nyplayer

Here is my log with VLC ... It hangs my clients... when watching live TV etc.. Makes my Server go crazy. Hard to shutdown and restart. Going back to no VLC.

There's a lot going on there that I don't understand.

Do you have virus SW running on the system?

nyplayer · #**1336** 09-03-2012, 08:07 PM

No virus software ... No Firewall.. Attached is the log without VLC

Intel® Rapid Storage Technology is running but I do not have a raid configuration.

voorhees · #**1337** 09-03-2012, 08:11 PM

Quote:

Originally Posted by babgvant

When you say that SageTV hangs, do you mean the UI process stops working?

When trying to play Live TV on one of my extenders or Placeshiter I get the spinning circle and have to shut off and turn back on the extender to get it to "unhang," and I have to shut down (close out) Placeshifter and restart it to get it to "unhang." The UI becomes unresponsive and never comes back. The instance connecting to the server has to restarted to get out of the "hang."

voorhees · #**1338** 09-03-2012, 10:47 PM

Quote:

Originally Posted by babgvant

There's a tab in the config tool that lets you send commands to the SageDCT tuner. In this case you want to send a "START" command w/ a valid channel and file path. Don't forget to send a "STOP" when done.

OK, it looks like I may have figured out my issue, at least in limited testing but so far it is infinitely better results. I tried using the SageDCT test method mentioned by babgvant, and that worked

. I was not exactly sure why, but hey it did. Then I tested in SageTV several times, all with the same results I had gotten many times before, SageTV UI hangs/unusable. Then I put 2 + 2 together and realized the difference in how I ran the test in SageDCT and how I am using SageTV is UNC paths. I had my recording and import paths set using UNC paths, but I used the actual path when testing SageDCT. So, I changed my recording path to the actual path and it works (so far, but I have not tested the channels that stopped working recently with the Comcast issue). babgvant, I know I had read in this thread that you said we should not use UNC paths, but your comment addressed a different problem I was not experiencing. Any who, I will test some more, but so far it looks like changing from UNC to actual paths fixed my VLC problem. Thanks for all of the help, and I will let you know if I see any issues pop up after more testing. Thanks.

sflamm · #**1339** 09-05-2012, 10:12 PM

Having issues since I upgraded to latest Prime beta 20120823beta1

SageDCT log file contain numerous errors:

Code:

2012/09/04 19:05:28.95 : StartRecording 6972 - no matching channel found for 759
2012/09/04 19:09:38.84 : StartRecording 6975 - no matching channel found for 739
2012/09/04 20:00:00.13 : StartRecording 6975 - no matching channel found for 739
2012/09/04 20:24:16.57 : StartRecording 6972 - no matching channel found for 192
2012/09/04 20:30:00.27 : StartRecording 6972 - no matching channel found for 192
2012/09/04 21:00:01.15 : StartRecording 6975 - no matching channel found for 739
2012/09/04 21:02:57.68 : StartRecording 6975 - no matching channel found for 709
2012/09/04 21:53:00.15 : StartRecording 6975 - no matching channel found for 709
2012/09/04 22:47:00.18 : StartRecording 6975 - no matching channel found for 709
2012/09/04 23:30:01.17 : StartRecording 6975 - no matching channel found for 709
2012/09/05 06:22:32.99 : StartRecording 6975 - no matching channel found for 702
2012/09/05 07:00:00.17 : StartRecording 6975 - no matching channel found for 702
2012/09/05 07:29:38.48 : RTP Sequence Error Last: 41191 Current: 41180
2012/09/05 07:29:38.48 : RTP Sequence Error Last: 41192 Current: 41182
2012/09/05 07:29:38.48 : RTP Sequence Error Last: 41193 Current: 41183
2012/09/05 07:29:38.48 : RTP Sequence Error Last: 41194 Current: 41184
2012/09/05 07:29:38.48 : RTP Sequence Error Last: 41195 Current: 41185
2012/09/05 07:29:38.48 : RTP Sequence Error Last: 41196 Current: 41186
2012/09/05 18:00:00.08 : StartRecording 6975 - no matching channel found for 747
2012/09/05 19:14:42.10 : StartRecording 6975 - no matching channel found for 709
2012/09/05 19:15:13.86 : StartRecording 6975 - no matching channel found for 725
2012/09/05 20:00:00.12 : StartRecording 6975 - no matching channel found for 725
2012/09/05 20:24:14.53 : StartRecording 6972 - no matching channel found for 192
2012/09/05 20:28:21.83 : StartRecording 6972 - no matching channel found for 769
2012/09/05 20:30:00.20 : StartRecording 6972 - no matching channel found for 769
2012/09/05 20:30:01.06 : StartRecording 6975 - no matching channel found for 725
2012/09/05 20:30:01.32 : RTP Sequence Error Last: 41097 Current: 19945
2012/09/05 20:30:01.35 : RTP Sequence Error Last: 41098 Current: 19993
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41102 Current: 20009
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41103 Current: 20010
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41105 Current: 20011
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41106 Current: 20012
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41107 Current: 20013
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41109 Current: 20014
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41110 Current: 20015
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41111 Current: 20016
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41112 Current: 20017
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41113 Current: 20018
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41114 Current: 20019
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41115 Current: 20020
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41117 Current: 20021
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41118 Current: 20022
2012/09/05 20:30:01.39 : RTP Sequence Error Last: 41119 Current: 20023

The Prime log has the following:

Code:

HDHomeRun Prime Tuner
Log History
19700101-00:00:00 System: reset reason = firmware upgrade
19700101-00:00:01 CableCARD: M-CARD inserted
19700101-00:00:03 System: network link 1000f
19700101-00:00:05 CableCARD: Motorola card (0000:0625)
19700101-00:00:05 CableCARD: authentication status: authentication in progress
19700101-00:00:05 CableCARD: authentication status: authentication success, activation success
19700101-00:00:10 System: ip address obtained: 10.0.0.56 / 255.255.255.0
20120829-06:04:47 CableCARD: time changed from Thu Jan 01 00:01:08 1970 to Wed Aug 29 06:04:47 2012
20120829-06:32:49 CableCARD: Tuner2: vchannel 746 (519MHz-5039) access = subscribed
20120829-06:32:53 CableCARD: Tuner2: vchannel 746 (519MHz-5039) access = subscribed
20120829-06:44:33 CableCARD: Tuner2: vchannel 734 (519MHz-5038) access = subscribed
20120829-08:02:51 CableCARD: Tuner2: vchannel 739 (465MHz-5004) access = subscribed
20120829-09:59:59 CableCARD: Tuner2: vchannel 739 (465MHz-5004) access = subscribed
20120829-10:01:07 CableCARD: Tuner2: vchannel 738 (567MHz-5007) access = subscribed
20120830-00:00:00 CableCARD: Tuner2: vchannel 747 (465MHz-5005) access = subscribed
20120830-02:54:39 CableCARD: Tuner2: vchannel 703 (93MHz-1) access = subscribed
20120830-03:00:00 CableCARD: Tuner2: vchannel 703 (93MHz-1) access = subscribed
20120830-03:11:19 CableCARD: Tuner2: vchannel 739 (465MHz-5004) access = subscribed
20120830-03:59:59 CableCARD: Tuner2: vchannel 739 (465MHz-5004) access = subscribed
20120830-04:06:37 CableCARD: Tuner2: vchannel 746 (519MHz-5039) access = subscribed
20120830-04:59:59 CableCARD: Tuner2: vchannel 746 (519MHz-5039) access = subscribed
20120830-06:58:56 CableCARD: Tuner2: vchannel 744 (411MHz-5058) access = subscribed
20120830-06:59:59 CableCARD: Tuner2: vchannel 744 (411MHz-5058) access = subscribed
20120830-07:59:59 CableCARD: Tuner2: vchannel 744 (411MHz-5058) access = subscribed
20120830-08:09:04 CableCARD: Tuner2: vchannel 741 (363MHz-5028) access = subscribed
20120830-08:29:20 CableCARD: Tuner2: vchannel 739 (465MHz-5004) access = subscribed
20120831-04:16:53 CableCARD: Tuner2: vchannel 787 (303MHz-5098) access = subscribed
20120831-04:26:33 CableCARD: Tuner2: vchannel 787 (303MHz-5098) access = subscribed
20120831-04:31:25 CableCARD: Tuner2: vchannel 738 (567MHz-5007) access = subscribed
20120831-05:00:00 CableCARD: Tuner2: vchannel 738 (567MHz-5007) access = subscribed
20120831-05:59:59 CableCARD: Tuner2: vchannel 738 (567MHz-5007) access = subscribed
20120831-06:01:12 CableCARD: Tuner2: vchannel 759 (459MHz-5021) access = subscribed
20120831-06:06:18 CableCARD: Tuner2: vchannel 787 (303MHz-5098) access = subscribed
20120831-06:08:09 CableCARD: Tuner2: vchannel 787 (303MHz-5098) access = subscribed
20120831-06:09:13 CableCARD: Tuner2: vchannel 759 (459MHz-5021) access = subscribed
20120831-06:11:23 CableCARD: Tuner2: vchannel 787 (303MHz-5098) access = subscribed
20120831-06:14:17 CableCARD: Tuner2: vchannel 759 (459MHz-5021) access = subscribed
20120831-06:16:15 CableCARD: Tuner2: vchannel 707 (285MHz-1) access = subscribed
20120831-06:17:47 CableCARD: Tuner2: vchannel 703 (93MHz-1) access = subscribed
20120831-06:18:29 CableCARD: Tuner2: vchannel 743 (351MHz-5065) access = subscribed
20120831-06:19:56 CableCARD: Tuner2: vchannel 759 (459MHz-5021) access = subscribed
20120831-06:26:17 CableCARD: Tuner2: vchannel 787 (303MHz-5098) access = subscribed
20120831-15:45:00 CableCARD: Tuner2: vchannel 766 (381MHz-5051) access = subscribed
20120831-19:47:15 CableCARD: message: Emergency message on TV - tune to channel 27
20120831-23:01:39 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120831-23:30:00 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120901-00:53:58 CableCARD: Tuner2: vchannel 192 (531MHz-8110) access = subscribed
20120901-01:02:52 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120901-03:49:20 CableCARD: Tuner2: vchannel 737 (483MHz-2) access = subscribed
20120901-05:00:00 CableCARD: Tuner2: vchannel 737 (483MHz-2) access = subscribed
20120901-15:15:00 CableCARD: Tuner2: vchannel 766 (381MHz-5051) access = subscribed
20120901-15:33:41 CableCARD: Tuner2: vchannel 189 (285MHz-3) access = subscribed
20120901-17:21:18 CableCARD: Tuner2: vchannel 733 (375MHz-5040) access = subscribed
20120901-18:00:00 CableCARD: Tuner2: vchannel 733 (375MHz-5040) access = subscribed
20120901-20:27:17 CableCARD: Tuner2: vchannel 189 (285MHz-3) access = subscribed
20120901-20:27:50 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120901-20:29:59 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120901-20:54:59 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120901-20:59:58 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120901-21:29:59 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120901-21:34:47 CableCARD: Tuner1: vchannel 798 (459MHz-5020) access = subscribed
20120901-21:59:58 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120901-22:29:59 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120901-23:00:00 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120902-00:59:59 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120902-01:17:54 CableCARD: Tuner0: vchannel 737 (483MHz-2) access = subscribed
20120902-01:29:59 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120902-01:59:59 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120902-02:00:00 CableCARD: Tuner1: vchannel 753 (381MHz-5049) access = subscribed
20120902-02:29:59 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120902-03:00:00 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120902-04:29:59 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120902-04:59:59 CableCARD: Tuner2: vchannel 769 (765MHz-5068) access = subscribed
20120902-05:44:25 CableCARD: Tuner2: vchannel 743 (351MHz-5065) access = subscribed
20120902-05:49:43 CableCARD: Tuner2: vchannel 750 (567MHz-5009) access = subscribed
20120902-05:59:59 CableCARD: Tuner2: vchannel 750 (567MHz-5009) access = subscribed
20120902-07:00:54 CableCARD: Tuner2: vchannel 798 (459MHz-5020) access = subscribed
20120902-07:04:23 CableCARD: Tuner2: vchannel 733 (375MHz-5040) access = subscribed
20120902-07:07:22 CableCARD: Tuner2: vchannel 746 (519MHz-5039) access = subscribed
20120902-15:03:32 CableCARD: Tuner2: vchannel 189 (285MHz-3) access = subscribed
20120902-15:05:42 CableCARD: Tuner2: vchannel 767 (351MHz-5066) access = subscribed
20120902-15:29:59 CableCARD: Tuner2: vchannel 767 (351MHz-5066) access = subscribed
20120902-15:50:36 CableCARD: Tuner1: vchannel 746 (519MHz-5039) access = subscribed
20120902-15:59:59 CableCARD: Tuner1: vchannel 746 (519MHz-5039) access = subscribed
20120902-16:00:00 CableCARD: Tuner2: vchannel 767 (351MHz-5066) access = subscribed
20120902-16:03:47 CableCARD: Tuner1: vchannel 745 (357MHz-5063) access = subscribed
20120902-17:00:00 CableCARD: Tuner2: vchannel 767 (351MHz-5066) access = subscribed
20120902-17:55:59 CableCARD: Tuner1: vchannel 745 (357MHz-5063) access = subscribed
20120902-17:59:59 CableCARD: Tuner2: vchannel 767 (351MHz-5066) access = subscribed
20120902-18:29:59 CableCARD: Tuner2: vchannel 767 (351MHz-5066) access = subscribed
20120902-18:59:59 CableCARD: Tuner2: vchannel 767 (351MHz-5066) access = subscribed
20120902-19:00:45 CableCARD: Tuner2: vchannel 767 (351MHz-5066) access = subscribed
20120902-20:37:01 CableCARD: Tuner1: vchannel 745 (357MHz-5063) access = subscribed
20120902-21:09:01 CableCARD: Tuner1: vchannel 745 (357MHz-5063) access = subscribed
20120902-21:40:01 CableCARD: Tuner1: vchannel 745 (357MHz-5063) access = subscribed
20120902-23:07:30 CableCARD: Tuner2: vchannel 712 (267MHz-5) access = subscribed
20120902-23:18:19 CableCARD: Tuner2: vchannel 709 (285MHz-2) access = subscribed
20120902-23:20:13 CableCARD: Tuner2: vchannel 712 (267MHz-5) access = subscribed
20120902-23:59:59 CableCARD: Tuner2: vchannel 712 (267MHz-5) access = subscribed
20120903-00:10:05 CableCARD: Tuner1: vchannel 769 (765MHz-5068) access = subscribed
20120903-00:11:21 CableCARD: Tuner1: vchannel 769 (765MHz-5068) access = subscribed
20120903-00:11:58 CableCARD: Tuner1: vchannel 769 (765MHz-5068) access = subscribed
20120903-00:13:17 CableCARD: Tuner2: vchannel 750 (567MHz-5009) access = subscribed
20120903-00:16:20 CableCARD: Tuner2: vchannel 750 (567MHz-5009) access = subscribed
20120903-00:16:32 CableCARD: Tuner0: vchannel 750 (567MHz-5009) access = subscribed
20120903-00:29:59 CableCARD: Tuner1: vchannel 769 (765MHz-5068) access = subscribed
20120903-00:59:59 CableCARD: Tuner1: vchannel 769 (765MHz-5068) access = subscribed
20120903-01:00:00 CableCARD: Tuner0: vchannel 750 (567MHz-5009) access = subscribed
20120903-01:00:01 CableCARD: Tuner2: vchannel 753 (381MHz-5049) access = subscribed
20120903-01:30:00 CableCARD: Tuner1: vchannel 769 (765MHz-5068) access = subscribed
20120903-01:31:21 CableCARD: Tuner1: vchannel 769 (765MHz-5068) access = subscribed
20120903-01:36:02 CableCARD: Tuner1: vchannel 769 (765MHz-5068) access = subscribed
20120903-02:00:00 CableCARD: Tuner0: vchannel 750 (567MHz-5009) access = subscribed
20120903-02:00:16 CableCARD: Tuner1: vchannel 798 (459MHz-5020) access = subscribed
20120903-03:00:00 CableCARD: Tuner0: vchannel 750 (567MHz-5009) access = subscribed
20120903-04:00:00 CableCARD: Tuner0: vchannel 750 (567MHz-5009) access = subscribed
20120903-04:44:07 CableCARD: Tuner2: vchannel 750 (567MHz-5009) access = subscribed
20120903-04:48:07 CableCARD: Tuner1: vchannel 739 (465MHz-5004) access = subscribed
20120903-05:00:00 CableCARD: Tuner2: vchannel 746 (519MHz-5039) access = subscribed
20120903-05:32:59 CableCARD: Tuner1: vchannel 739 (465MHz-5004) access = subscribed
20120903-05:36:22 CableCARD: Tuner1: vchannel 739 (465MHz-5004) access = subscribed
20120903-05:36:22 CableCARD: Tuner1: vchannel 739 (465MHz-5004) access = subscribed
20120903-05:51:47 CableCARD: Tuner1: vchannel 747 (465MHz-5005) access = subscribed
20120903-06:00:00 CableCARD: Tuner1: vchannel 747 (465MHz-5005) access = subscribed
20120903-06:03:21 CableCARD: Tuner2: vchannel 782 (357MHz-5062) access = subscribed
20120903-06:32:19 CableCARD: Tuner2: vchannel 735 (321MHz-2) access = subscribed
20120903-06:42:35 CableCARD: Tuner2: vchannel 746 (519MHz-5039) access = subscribed
20120903-06:51:51 CableCARD: Tuner2: vchannel 725 (483MHz-1) access = subscribed
20120903-07:01:16 UPnP: tcp unexpected close (soap_service_connection:80)
20120903-07:01:16 UPnP: transaction did not complete 11 (soap_service_connection:51)
20120903-07:02:09 CableCARD: Tuner2: vchannel 738 (567MHz-5007) access = subscribed
20120903-07:59:47 CableCARD: Tuner2: vchannel 739 (465MHz-5004) access = subscribed
20120903-15:59:05 CableCARD: Tuner2: vchannel 189 (285MHz-3) access = subscribed
20120903-15:59:48 CableCARD: Tuner1: vchannel 192 (531MHz-8110) access = subscribed
20120903-15:59:59 CableCARD: Tuner1: vchannel 192 (531MHz-8110) access = subscribed
20120903-16:30:00 CableCARD: Tuner1: vchannel 192 (531MHz-8110) access = subscribed
20120903-16:59:59 CableCARD: Tuner1: vchannel 192 (531MHz-8110) access = subscribed
20120903-17:29:59 CableCARD: Tuner1: vchannel 192 (531MHz-8110) access = subscribed
20120903-17:59:59 CableCARD: Tuner1: vchannel 192 (531MHz-8110) access = subscribed
20120904-00:30:00 CableCARD: Tuner2: vchannel 766 (381MHz-5051) access = subscribed
20120904-03:35:54 CableCARD: Tuner1: vchannel 189 (285MHz-3) access = subscribed
20120904-03:36:13 CableCARD: Tuner2: vchannel 192 (531MHz-8110) access = subscribed
20120904-03:56:49 CableCARD: Tuner1: vchannel 739 (465MHz-5004) access = subscribed
20120904-03:58:14 CableCARD: Tuner0: vchannel 769 (765MHz-5068) access = subscribed
20120904-03:59:59 CableCARD: Tuner1: vchannel 739 (465MHz-5004) access = subscribed
20120904-04:00:00 CableCARD: Tuner2: vchannel 737 (483MHz-2) access = subscribed
20120904-04:01:27 CableCARD: Tuner2: vchannel 737 (483MHz-2) access = subscribed
20120904-04:30:00 CableCARD: Tuner0: vchannel 769 (765MHz-5068) access = subscribed
20120904-04:59:36 CableCARD: Tuner2: vchannel 737 (483MHz-2) access = subscribed
20120904-05:00:08 CableCARD: Tuner2: vchannel 737 (483MHz-2) access = subscribed
20120904-05:00:33 CableCARD: Tuner2: vchannel 737 (483MHz-2) access = subscribed
20120904-05:06:22 CableCARD: Tuner1: vchannel 758 (441MHz-5012) access = subscribed
20120904-05:06:57 CableCARD: Tuner2: vchannel 737 (483MHz-2) access = subscribed
20120904-06:00:00 CableCARD: Tuner2: vchannel 737 (483MHz-2) access = subscribed
20120904-13:45:08 CableCARD: Tuner2: vchannel 702 (261MHz-2) access = subscribed
20120904-13:59:59 CableCARD: Tuner2: vchannel 702 (261MHz-2) access = subscribed
20120904-14:20:33 CableCARD: Tuner2: vchannel 762 (375MHz-5041) access = subscribed
20120904-15:12:10 CableCARD: Tuner2: vchannel 189 (285MHz-3) access = subscribed
20120904-15:12:54 CableCARD: Tuner2: vchannel 709 (285MHz-2) access = subscribed
20120904-15:29:59 CableCARD: Tuner2: vchannel 709 (285MHz-2) access = subscribed
20120904-16:00:00 CableCARD: Tuner2: vchannel 709 (285MHz-2) access = subscribed
20120904-18:31:39 CableCARD: message: Emergency message on TV - tune to channel 27
20120905-00:52:35 CableCARD: Tuner2: vchannel 192 (531MHz-8110) access = subscribed
20120905-00:58:23 CableCARD: Tuner2: vchannel 766 (381MHz-5051) access = subscribed
20120905-00:59:59 CableCARD: Tuner2: vchannel 766 (381MHz-5051) access = subscribed
20120905-01:00:49 CableCARD: Tuner2: vchannel 767 (351MHz-5066) access = subscribed
20120905-01:29:59 CableCARD: Tuner2: vchannel 767 (351MHz-5066) access = subscribed
20120905-01:46:27 CableCARD: Tuner1: vchannel 725 (483MHz-1) access = subscribed
20120905-01:47:27 CableCARD: Tuner1: vchannel 724 (321MHz-1) access = subscribed
20120905-01:48:42 CableCARD: Tuner1: vchannel 703 (93MHz-1) access = subscribed
20120905-01:51:28 CableCARD: Tuner1: vchannel 759 (459MHz-5021) access = subscribed
20120905-02:03:26 CableCARD: Tuner0: vchannel 703 (93MHz-1) access = subscribed
20120905-02:04:22 CableCARD: Tuner0: vchannel 711 (93MHz-6) access = subscribed
20120905-02:05:29 CableCARD: Tuner1: vchannel 759 (459MHz-5021) access = subscribed
20120905-02:05:33 CableCARD: Tuner1: vchannel 759 (459MHz-5021) access = subscribed
20120905-02:09:39 CableCARD: Tuner2: vchannel 739 (465MHz-5004) access = subscribed
20120905-03:00:00 CableCARD: Tuner2: vchannel 739 (465MHz-5004) access = subscribed
20120905-03:24:16 CableCARD: Tuner1: vchannel 192 (531MHz-8110) access = subscribed
20120905-03:30:00 CableCARD: Tuner1: vchannel 192 (531MHz-8110) access = subscribed
20120905-04:00:00 CableCARD: Tuner2: vchannel 739 (465MHz-5004) access = subscribed
20120905-04:02:57 CableCARD: Tuner2: vchannel 709 (285MHz-2) access = subscribed
20120905-04:52:59 CableCARD: Tuner2: vchannel 709 (285MHz-2) access = subscribed
20120905-05:46:59 CableCARD: Tuner2: vchannel 709 (285MHz-2) access = subscribed
20120905-06:30:00 CableCARD: Tuner2: vchannel 709 (285MHz-2) access = subscribed
20120905-11:18:30 CableCARD: card indicated fatal error or firmware upgrade (ccio_detect:218)
20120905-11:18:30 CableCARD: technical error 0 (ccio_detect:219)
20120905-11:18:30 CableCARD: message: A technical problem is preventing you from receiving all the cable services at this time. Please call your cable operator and report error code 161-0 to have this problem resolved.
20120905-11:18:30 CableCARD: M-CARD reset
20120905-11:18:34 CableCARD: Motorola card (0000:0625)
20120905-11:18:34 CableCARD: authentication status: authentication in progress
20120905-11:18:34 CableCARD: authentication status: authentication success, activation success
20120905-13:22:32 CableCARD: Tuner2: vchannel 702 (261MHz-2) access = subscribed
20120905-14:00:00 CableCARD: Tuner2: vchannel 702 (261MHz-2) access = subscribed
20120906-01:00:00 CableCARD: Tuner2: vchannel 747 (465MHz-5005) access = subscribed
20120906-02:14:42 CableCARD: Tuner2: vchannel 709 (285MHz-2) access = subscribed
20120906-02:15:14 CableCARD: Tuner2: vchannel 725 (483MHz-1) access = subscribed
20120906-02:59:59 CableCARD: Tuner2: vchannel 725 (483MHz-1) access = subscribed
20120906-03:24:14 CableCARD: Tuner1: vchannel 192 (531MHz-8110) access = subscribed
20120906-03:28:21 CableCARD: Tuner1: vchannel 769 (765MHz-5068) access = subscribed
20120906-03:29:59 CableCARD: Tuner1: vchannel 769 (765MHz-5068) access = subscribed
20120906-03:30:00 CableCARD: Tuner2: vchannel 725 (483MHz-1) access = subscribed
20120906-03:32:02 CableCARD: Tuner2: vchannel 746 (519MHz-5039) access = subscribed
20120906-03:59:59 CableCARD: Tuner2: vchannel 746 (519MHz-5039) access = subscribed
20120906-04:02:28 CableCARD: Tuner2: vchannel 795 (351MHz-5064) access = subscribed

Help?

sflamm · #**1340** 09-06-2012, 11:34 AM

Rebooted the HDHR Prime in hopes the problem would go away - but no luck.
Still getting the errors:

Code:

2012/09/05 21:27:22.53 : StartRecording 6975 - no matching channel found for 795
2012/09/05 22:00:00.31 : StartRecording 6972 - no matching channel found for 769
2012/09/05 22:05:00.10 : StartRecording 6972 - no matching channel found for 769
2012/09/05 22:30:00.31 : StartRecording 6972 - no matching channel found for 769
2012/09/05 22:31:11.67 : StartRecording 6975 - no matching channel found for 702
2012/09/05 22:33:02.92 : StartRecording 6975 - no matching channel found for 746
2012/09/05 22:44:02.03 : RTP Sequence Error Last: 51977 Current: 51968
2012/09/05 22:44:02.03 : RTP Sequence Error Last: 51979 Current: 51969
2012/09/05 23:00:00.26 : StartRecording 6975 - no matching channel found for 746
2012/09/05 23:21:25.46 : StartRecording 6975 - no matching channel found for 733
2012/09/06 00:00:00.25 : StartRecording 6975 - no matching channel found for 733

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HDHomeRun PRIME CableCARD does work with premium channels	Homebuilder	Hardware Support	1	05-17-2011 08:08 AM
HDHR Prime Available For Pre-Order on Amazon, $207.20 USD (or not)	mayamaniac	General Discussion	20	05-14-2011 04:15 PM
Let's add support for the new silcon dust HDHR Prime (copy freely channels)	Gustovier	Hardware Support	30	05-05-2011 08:32 AM
HDHomerun Prime?	cenwesi	Hardware Support	26	04-19-2011 05:40 PM
HDHomeRun Prime with CableCARD might work with MythTV after all	KJake	The SageTV Community	4	07-22-2010 09:10 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)