|
|
|||||||
| Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
05-27-2004, 12:54 AM
|
|||
|
|||
|
onboard audio asus a7n8x-e pvr-250
Hi folks....
I have an ASUS A7N8X-E Deluxe motherboard with onboard audio. I also have the Hauppauge PVR-250 capture card. I use the WinTV2000 software to watch Live TV, and it works fine. I get audio & video output. If I try to use the SAGE 2 trial, or the Beyond TV trial; I can get video, but no audio. I have tried using both the 1/8" audio out jack, and the coaxial digital audio out. Both work with WinTV2000, neither work with Sage/Beyond. Any suggestions? 
|
|
#2
05-27-2004, 02:48 AM
|
||||
|
||||
|
I have the same sysbrd in both my Client and Server and audio works with both. Server I don't do any watching but just checked it's settings for playback (through dinky speakers plugged into sybrd just so I know what's going on if needed.) Check your audio settings under setup:detailed:audio. Server set for Renderer - Directsound:Nvidia..., mpeq2 audio decoder - Intervideo NonCSS. My main Client isn't up at the moment but I output via sysbrd digital coax to theater 5.1 sound system. As I recall renderer the same but different Intervideo mpeq2 decoder.
__________________
Click here for Pic's & spec's of my SageTV Server & HTPC Client
|
|
#3
05-27-2004, 04:50 AM
|
||||
|
||||
|
In your NVMixer set your input for stereo mix.
Gerry
__________________
Big Gerr _______ Server - WHS 2011: Sage 7.1.9 - 1 x HD Prime and 2 x HDHomeRun - Intel Atom D525 1.6 GHz, Acer Easystore, RAM 4 GB, 4 x 2TB hotswap drives, 1 x 2TB USB ext Clients: 2 x PC Clients, 1 x HD300, 2 x HD-200, 1 x HD-100 DEV Client: Win 7 Ultimate 64 bit - AMD 64 x2 6000+, Gigabyte GA-MA790GP-DS4H MB, RAM 4GB, HD OS:500GB, DATA:1 x 500GB, Pace RGN STB.
|
|
#4
05-27-2004, 11:56 AM
|
|||
|
|||
|
I've tried every combination of renderer and decoder. I previously didnt have NVMixer, but I d/l the latest driver from nvidia.com, which includes this, and have set input to Stereo Mix.
no luck. any other suggestions?
|
|
#5
05-27-2004, 12:34 PM
|
||||
|
||||
|
I'm at work and not at the PC. I have this working fine on this board. Stereo mix for input. Make sure none of the other inputs are muted for now. Try this without digitized input. In Sage I have used Default Directsound and also Directsound:Nvidia device or whatever it says. The PVR250 passes sound over the PCI bus and the stereo mix should work for you. I'll look tonight to see if I missed anything for you.
Gerry
__________________
Big Gerr _______ Server - WHS 2011: Sage 7.1.9 - 1 x HD Prime and 2 x HDHomeRun - Intel Atom D525 1.6 GHz, Acer Easystore, RAM 4 GB, 4 x 2TB hotswap drives, 1 x 2TB USB ext Clients: 2 x PC Clients, 1 x HD300, 2 x HD-200, 1 x HD-100 DEV Client: Win 7 Ultimate 64 bit - AMD 64 x2 6000+, Gigabyte GA-MA790GP-DS4H MB, RAM 4GB, HD OS:500GB, DATA:1 x 500GB, Pace RGN STB.
|
|
#6
05-30-2004, 03:33 AM
|
|||
|
|||
|
I have this exact same mobo in my Sage based HTPC and using the coax digital out to my receiver. This works fine.
I know this doesn't solve your problem directly, but just wanted to provide another data point that there is nothing inherently wrong with this configuration. Good luck !
|
|
#7
05-30-2004, 06:24 AM
|
|||
|
|||
|
sound like your decoder is not set up correctly
try using the hauppauge intervideo decoder with default render for both also this is weird but I installed the new beta of BeyondTV 3.5 and I got no audio with NVDVD but I get it in Sage, huh?
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
