|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
can anyone suggest a good ATA IDE PCI card
I am not looking for anything expensive
no raid no SATA no four channel and up just need a two channel so I can add one more harddrive and no have to go down to just a DVD drive currently DVD, CD RW, 250 GB, 80 GB, ordered DVD burner, and want the 120 GB from circuit city I will need just two IDE connections any suggestions also this is all running on a 250 watt power supply will this survive? here are the specs General Manufacturer Delta/Astec Model NPS-250CBB/ATX250-3505-1412B Rev 01 Performance Voltage 115/230 V Frequency 50/60 Hz Input current 6.5 Amps at 115 VAC 3.5 Amps at 230 VAC Wattage 250 W Environmental Operating temperature 0 to 50° C ambient Operating humidity 20 to 80% RH Thermal regulation +/- 2% per ° C Shock 40g (half sine), 11 ms shock Vibration 2 to 300 Hz, 0.25 g sinusoidal vibration Mean time between failure 100,000 hrs. minimum excluding fan at full load (25° C) 40,000 hrs. minimum for fan only (25° C) Regulatory and safety compliance EMI/RFI regulations FCC Part 15 Class B, EN550221993, EN55082-1 1992, EN61000-3-2, EN61000-3-3, VCCI Class II ITE, AS/NZS 3548:1992 Safety UL 1950, CSA 22.2 No. 950, EN60950, IEC 950 CB Scheme, NOM-019-SCFI-1993, AS/NZS 3260:1993 |
#2
|
||||
|
||||
You could try one of these
http://cgi.ebay.com/ws/eBayISAPI.dll...701051681&rd=1 |
#3
|
|||
|
|||
promise or highpoint have some
some retail hdd's come with ide controllers, wd's 250 does im sure, they run anywhere from 20 to 50 bucks.. promise: http://www.newegg.com/app/ViewProduc...tby=14&order=1 highpoint: http://www.newegg.com/app/ViewProduc...tby=14&order=1 Last edited by xlr8shun; 05-25-2004 at 05:52 PM. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|