SageTV Community  

Go Back   SageTV Community > SageTV Development and Customizations > SageTV Customizations > SageMC Custom Interface
Reload this Page Halt Detected in recording
Forum Rules FAQs Community Downloads Today's Posts Search

Notices

SageMC Custom Interface This forum is for discussing the user-created SageMC custom interface for SageTV.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-13-2010, 10:17 AM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
  
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
Halt Detected in recording
All, Im in desperate need of some help.

I recently moved to a new server (details in my sig)
I run everything in my network on a Gigabit switch 24 PORT.
After switching to my new server i have recently gotten tot he point where if i have mutliple recordings going i will get errors in the sage system console that say Halt was detected in recording, sage will try and reset. This also causes the spinning wheel of death on the ui when recordings are halted. This doesn't just happen with recordsings it will also happen while watching live tv..which i know is technically a recording so i guess it may be the same issue. So before posting this and over the past several days i have been watching Sage closely and have made sure of a few things:

Firstly i run the following:
- latest sage server XP build
- latest SageMC beta build
- latest phoenix
- latest BMT 4.0 (no AUTO PLUGIN! this was screwing my metadata up immensly and actually caused me some problems with the metadata being so messed up that Sage was becoming unresponsive. I had to manually fix metadata and then all seemed to be fine..)
- Jetty
- Neilms webserver for jetty
- Sage Movie Wall
- TVExplorer
- Playon Plugin
- SlimPlayer

On my server i also run
- Playon Server
- SqueezeBox server

One thing not in my sig is that i have recently stopped using the HVR1600 for recordings and only use it for hardware loopback capture for the SlimPlayer plugin.


1) NETBIOS is installed (eventhough i used the static ip of the server for recordings)
2) All sage recrodings are recorded to local sage server drives via UNC paths, and all drives are formatted in 64KB block size
3) AVG Virus Scan is set to EXCLUDE these drives from any scanning
4) All other additionaly software installed by my mobo disk (Asus) has been removed..so programs like vPower.
5) I do have an HVR1600 capture device which i have read has problems on certain mobos if not in the correct PCI slot, so i ensured that it is in fact located in the first PCI slot.
6) Set Sage debugging to on and have the following code snippet for you all to take a look at

Code:
Tue 4/13 10:21:11.801 [Ministry@155b814] Ministry is waiting for 180 sec
Tue 4/13 10:21:51.801 [FSManager@d965ea] Async encoder halt detector found a halt; kick the Seeker so it can restart the device
Tue 4/13 10:21:51.801 [FSManager@d965ea] Async encoder halt detector found a halt; kick the Seeker so it can restart the device
Tue 4/13 10:21:51.801 [FSManager@d965ea] Async encoder halt detector found a halt; kick the Seeker so it can restart the device
Tue 4/13 10:21:51.802 [FSManager@d965ea] Async encoder halt detector found a halt; kick the Seeker so it can restart the device
Tue 4/13 10:21:51.802 [FSManager@d965ea] Async encoder halt detector found a halt; kick the Seeker so it can restart the device
Tue 4/13 10:21:51.802 [Seeker@7f9d70] Seeker awoken
Tue 4/13 10:21:51.802 [Seeker@7f9d70] MemStats: Used=49MB Total=99MB Max=1037MB
Tue 4/13 10:21:51.803 [Seeker@7f9d70] MARK 1 currRecord=FA[stationID=20454 The Price Is Right time=Tue 4/13 10:00:00.000 dur=1:00:00] enc=Silicondust HDHomeRun Tuner 1016E1A1-0 clients=[] ir=false
Tue 4/13 10:21:51.803 [Seeker@7f9d70] Seeker in AUTOMATIC mode nextRecord=A[8467270,8465456,"American Idol",20361@0413.19:00,88] nextTTA=31088197
Tue 4/13 10:21:51.803 [Seeker@7f9d70] newRecord=FA[stationID=20454 The Price Is Right time=Tue 4/13 10:00:00.000 dur=1:00:00]
Tue 4/13 10:21:51.803 [Seeker@7f9d70] Record was enabled on what's already being recorded; update status.
Tue 4/13 10:21:51.803 [Seeker@7f9d70] Keeping record just the way it is.
Tue 4/13 10:21:51.803 [Seeker@7f9d70] MARK 1 currRecord=FA[stationID=20361 The Dr. Oz Show time=Tue 4/13 10:00:00.000 dur=1:00:00] enc=Silicondust HDHomeRun Tuner 1016E1A1-1 clients=[] ir=false
Tue 4/13 10:21:51.803 [Seeker@7f9d70] Seeker in AUTOMATIC mode nextRecord=A[8467403,8465551,"Lost",20456@0413.20:00,62] nextTTA=34688197
Tue 4/13 10:21:51.803 [Seeker@7f9d70] newRecord=FA[stationID=20361 The Dr. Oz Show time=Tue 4/13 10:00:00.000 dur=1:00:00]
Tue 4/13 10:21:51.804 [Seeker@7f9d70] Record was enabled on what's already being recorded; update status.
Tue 4/13 10:21:51.804 [Seeker@7f9d70] Keeping record just the way it is.
Tue 4/13 10:21:51.804 [Seeker@7f9d70] MARK 1 currRecord=FA[stationID=20452 Today time=Tue 4/13 7:00:00.000 dur=4:00:00] enc=Hauppauge WinTV-7164 Analog Capture clients=[] ir=false
Tue 4/13 10:21:51.804 [Seeker@7f9d70] Seeker in AUTOMATIC mode nextRecord=A[8467300,8465588,"Parenthood",20452@0413.21:00,60] nextTTA=38288197
Tue 4/13 10:21:51.804 [Seeker@7f9d70] newRecord=FA[stationID=20452 Today time=Tue 4/13 7:00:00.000 dur=4:00:00]
Tue 4/13 10:21:51.804 [Seeker@7f9d70] Record was enabled on what's already being recorded; update status.
Tue 4/13 10:21:51.804 [Seeker@7f9d70] Keeping record just the way it is.
Tue 4/13 10:21:51.804 [Seeker@7f9d70] MARK 1 currRecord=FA[stationID=11653 The View time=Tue 4/13 10:00:00.000 dur=1:00:00] enc=Hauppauge WinTV-7164 Analog Capture #2 clients=[] ir=false
Tue 4/13 10:21:51.805 [Seeker@7f9d70] Seeker in AUTOMATIC mode nextRecord=A[8516040,8466287,"Justified",14321@0413.21:00,62] nextTTA=38288197
Tue 4/13 10:21:51.805 [Seeker@7f9d70] newRecord=FA[stationID=11653 The View time=Tue 4/13 10:00:00.000 dur=1:00:00]
Tue 4/13 10:21:51.805 [Seeker@7f9d70] Record was enabled on what's already being recorded; update status.
Tue 4/13 10:21:51.805 [Seeker@7f9d70] Keeping record just the way it is.
Tue 4/13 10:21:51.805 [Seeker@7f9d70] MARK 1 currRecord=A[8414831,8414803,"Supernatural",11164@0413.10:00,60] enc=ATI AVStream Analog Capture clients=[] ir=false
Tue 4/13 10:21:51.805 [Seeker@7f9d70] Seeker in AUTOMATIC mode nextRecord=A[8464449,8464428,"Deadliest Catch",11150@0413.20:00,60] nextTTA=34688197
Tue 4/13 10:21:51.805 [Seeker@7f9d70] newRecord=A[8414831,8414803,"Supernatural",11164@0413.10:00,60]
Tue 4/13 10:21:51.805 [Seeker@7f9d70] Keeping record just the way it is.
Tue 4/13 10:21:51.805 [Seeker@7f9d70] MARK 1 currRecord=null enc=Hauppauge WinTV 418 Video Capture clients=[] ir=false
Tue 4/13 10:21:51.806 [Seeker@7f9d70] Seeker in AUTOMATIC mode nextRecord=null nextTTA=9223372036854775807
Tue 4/13 10:21:51.806 [Seeker@7f9d70] newRecord=null
Tue 4/13 10:21:51.806 [Seeker@7f9d70] NOTHING TO RECORD FOR NOW...
Tue 4/13 10:21:51.806 [Seeker@7f9d70] RootFile=\\192.168.1.110\FREC fstype=null fileLength=1044088832
Tue 4/13 10:21:51.806 [Seeker@7f9d70] SEEKER HAS DETECTED A HALT IN THE ENCODER...TRYING TO RESET IT
Tue 4/13 10:21:51.806 [Seeker@7f9d70] VF.submitJob(VFJob[InactiveFile r=0.0 t=0 file=null ifn=\\192.168.1.110\FREC\ThePriceIsRight-8417425-0.mpg])
Tue 4/13 10:21:51.806 [MainMsg@aa467] stopEncoding0 called (config:0x49000)
Tue 4/13 10:21:51.806 [MainMsg@aa467] stopEncoding0 trace 1 0x4add9f04
Tue 4/13 10:21:51.807 [MainMsg@aa467] stopEncoding0 trace 2
Tue 4/13 10:21:51.807 [MainMsg@aa467] stopEncoding0 trace 3 0x109bab4
Tue 4/13 10:21:51.831 [MainMsg@aa467] stopEncoding0 trace 4
Tue 4/13 10:21:51.831 [MainMsg@aa467] Stopped graph res=0x0
Tue 4/13 10:21:51.831 [MainMsg@aa467] stopEncoding0 trace 5
Tue 4/13 10:21:51.912 [Seeker@7f9d70] MediaFile startSegment enc=null MediaFile[id=8535999 A[8417425,1264536,"The Price Is Right",20454@0413.10:00,60] host=pixpvr encodedBy=Silicondust HDHomeRun Tuner 1016E1A1-0 WBBMDT format=MPEG2-PS 0:00:00 20576 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=bd-81010002 eng ]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=bd-82010002 spa ]] \\192.168.1.110\FREC\ThePriceIsRight-8417425-0.mpg, Seg0[Tue 4/13 10:11:46.466-Tue 4/13 10:21:51.839]]
Tue 4/13 10:21:51.913 [Seeker@7f9d70] MediaFile created subfile:\\192.168.1.110\FREC\ThePriceIsRight-8417425-1.mpg MediaFile[id=8535999 A[8417425,1264536,"The Price Is Right",20454@0413.10:00,60] host=pixpvr encodedBy=Silicondust HDHomeRun Tuner 1016E1A1-0 WBBMDT format=MPEG2-PS 0:00:00 20576 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=bd-81010002 eng ]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=bd-82010002 spa ]] \\192.168.1.110\FREC\ThePriceIsRight-8417425-0.mpg, Seg0[Tue 4/13 10:11:46.466-Tue 4/13 10:21:51.839]]
Tue 4/13 10:21:51.914 [Seeker@7f9d70] teardownGraph0 called for device='Silicondust HDHomeRun Tuner 1016E1A1-0'
Tue 4/13 10:21:51.914 [Seeker@7f9d70] QAM:CtrlData.... 0x4baf0f28
Tue 4/13 10:21:51.914 [Seeker@7f9d70] QAM: QAM Ctrl relesed Silicondust HDHomeRun Tuner 1016E1A1-0-0
Tue 4/13 10:21:51.914 [Seeker@7f9d70] teardownGraph0 step-1 
Tue 4/13 10:21:51.914 [Seeker@7f9d70] teardownGraph0 step0 
Tue 4/13 10:21:51.915 [Seeker@7f9d70] teardownGraph0 step1 
Tue 4/13 10:21:51.915 [Seeker@7f9d70] teardownGraph0 step2 
Tue 4/13 10:21:51.921 [Seeker@7f9d70] teardownGraph0 step3 
Tue 4/13 10:21:51.921 [Seeker@7f9d70] teardownGraph0 step4 
Tue 4/13 10:21:52.131 [Seeker@7f9d70] teardownGraph0 step5 
Tue 4/13 10:21:52.131 [Seeker@7f9d70] teardownGraph0 step6. 
Tue 4/13 10:21:52.131 [Seeker@7f9d70] teardownGraph0 pBuilder. 
Tue 4/13 10:21:52.131 [Seeker@7f9d70] teardownGraph0 pGraph. 
Tue 4/13 10:21:52.232 [Seeker@7f9d70] teardownGraph0 step8 
Tue 4/13 10:21:52.232 [Seeker@7f9d70] teardownGraph0 step9 
Tue 4/13 10:21:52.232 [Seeker@7f9d70] teardownGraph0 step10 
Tue 4/13 10:21:52.232 [Seeker@7f9d70] initGraph0 (ver 2.0.2) called capDev='Silicondust HDHomeRun Tuner 1016E1A1-0-0', Country:'United States of America', TuningMode:Cable, TunerType: Cap:0x49000
Tue 4/13 10:21:52.490 [Seeker@7f9d70] BDA capture is found on location:'Silicondust HDHomeRun Tuner 1016E1A1-0' id:'' for Silicondust HDHomeRun Tuner 1016E1A1-0-0 (@device:sw:{FD0A5AF4-B41D-11D2-9C95-00C04F7971E0}\Silicondust HDHomeRun Tuner 1016E1A1-0) (it's a BDA only).
Tue 4/13 10:21:52.490 [Seeker@7f9d70] Add BDA filters (capture:'@device:sw:{FD0A5AF4-B41D-11D2-9C95-00C04F7971E0}\Silicondust HDHomeRun Tuner 1016E1A1-0') for device=Silicondust HDHomeRun Tuner 1016E1A1-0
Tue 4/13 10:21:52.490 [Seeker@7f9d70] It's a HDHomeRun QAM(US Cable) tuner
Tue 4/13 10:21:52.490 [Seeker@7f9d70] Setup QAM BDATuningSpace (7  0)
Tue 4/13 10:21:52.491 [Seeker@7f9d70] LoadTuneTable QAM
Tue 4/13 10:21:52.515 [Seeker@7f9d70] QAM:Setup BDA QAM
Tue 4/13 10:21:52.526 [Seeker@7f9d70] BDA Filters are loaded
Tue 4/13 10:21:52.526 [MainMsg@aa467] switchToConnector0 tuningMode:Cable
Tue 4/13 10:21:52.526 [MainMsg@aa467] setEncodingProperties0 1302749192 Fair
Tue 4/13 10:21:52.526 [MainMsg@aa467] Set encoding property audiooutputmode to 0
Tue 4/13 10:21:52.526 [MainMsg@aa467] Set encoding property audiocrc to 0
Tue 4/13 10:21:52.526 [MainMsg@aa467] Set encoding property gopsize to 15
Tue 4/13 10:21:52.526 [MainMsg@aa467] Set encoding property videobitrate to 1700000
Tue 4/13 10:21:52.526 [MainMsg@aa467] Set encoding property inversetelecine to 0
Tue 4/13 10:21:52.526 [MainMsg@aa467] Set encoding property closedgop to 0
Tue 4/13 10:21:52.526 [MainMsg@aa467] Set encoding property vbr to 0
Tue 4/13 10:21:52.527 [MainMsg@aa467] Set encoding property outputstreamtype to 10
Tue 4/13 10:21:52.527 [MainMsg@aa467] Set encoding property width to 480
Tue 4/13 10:21:52.527 [MainMsg@aa467] Set encoding property height to 480
Tue 4/13 10:21:52.527 [MainMsg@aa467] Set encoding property audiobitrate to 256
Tue 4/13 10:21:52.527 [MainMsg@aa467] Set encoding property audiosampling to 48000
Tue 4/13 10:21:52.527 [MainMsg@aa467] Set encoding property disablefilter to 1
Tue 4/13 10:21:52.527 [MainMsg@aa467] Set encoding property medianfilter to 3
Tue 4/13 10:21:52.527 [MainMsg@aa467] Set encoding property fps to 30
Tue 4/13 10:21:52.527 [MainMsg@aa467] Set encoding property ipb to 0
Tue 4/13 10:21:52.527 [MainMsg@aa467] Set encoding property deinterlace to 0
Tue 4/13 10:21:52.527 [MainMsg@aa467] Set encoding property aspectratio to 1
Tue 4/13 10:21:52.527 [MainMsg@aa467] setupEncoding0 called for 1302749192 'Silicondust HDHomeRun Tuner 1016E1A1-0-0' (ver 1.0)
Tue 4/13 10:21:52.527 [MainMsg@aa467] Connecting capture Filters. (@device:sw:{FD0A5AF4-B41D-11D2-9C95-00C04F7971E0}\Silicondust HDHomeRun Tuner 1016E1A1-0)
Tue 4/13 10:21:52.531 [MainMsg@aa467] try connect BDA tuner 'Hauppauge WinTV-7164 BDA ATSC/QAM Tuner' (@device:pnp:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{8171d824-ce71-455b-8e02-f7bae3c59700}) to QAM
Tue 4/13 10:21:52.531 [MainMsg@aa467] checking mfr vendor, '1131' '' (class:2, 0)
Tue 4/13 10:21:52.532 [MainMsg@aa467] Tuner not sharing the same device with Capture, try next one. (QAM) state:1 loc1:pci:2-0 loc2:Silicondust HDHomeRun Tuner 1016E1A1-0.
Tue 4/13 10:21:52.532 [MainMsg@aa467] Didn't find TS pin in BDA tuner (QAM).
Tue 4/13 10:21:52.532 [MainMsg@aa467] Capture filter input pin mediatype clsid ({71985F41-1CA1-11D3-9CC8-00C04F7971E0}).
Tue 4/13 10:21:52.532 [MainMsg@aa467] Can't connect Tuner to Capture Filter (QAM).
Tue 4/13 10:21:52.534 [MainMsg@aa467] try connect BDA tuner 'Hauppauge WinTV-7164 BDA ATSC/QAM Tuner' (@device:pnp:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{8171d824-ce71-455b-8e02-f7bae3c59701}) to QAM
Tue 4/13 10:21:52.534 [MainMsg@aa467] checking mfr vendor, '1131' '' (class:2, 0)
Tue 4/13 10:21:52.535 [MainMsg@aa467] Tuner not sharing the same device with Capture, try next one. (QAM) state:1 loc1:pci:2-0 loc2:Silicondust HDHomeRun Tuner 1016E1A1-0.
Tue 4/13 10:21:52.535 [MainMsg@aa467] Didn't find TS pin in BDA tuner (QAM).
Tue 4/13 10:21:52.535 [MainMsg@aa467] Capture filter input pin mediatype clsid ({71985F41-1CA1-11D3-9CC8-00C04F7971E0}).
Tue 4/13 10:21:52.535 [MainMsg@aa467] Can't connect Tuner to Capture Filter (QAM).
Tue 4/13 10:21:52.865 [MainMsg@aa467] try connect BDA tuner 'Hauppauge WinTV 418 BDA Tuner' (@device:pnp:\\?\pci#ven_14f1&dev_5b7a&subsys_74440070&rev_00#4&2966ab86&0&28a4#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{e01e1072-3df3-4c23-b99f-6a27a7cc7cd2}) to QAM
Tue 4/13 10:21:52.865 [MainMsg@aa467] checking mfr vendor, '14f1' '' (class:2, 0)
Tue 4/13 10:21:52.867 [MainMsg@aa467] Tuner not sharing the same device with Capture, try next one. (QAM) state:1 loc1:pci:5-5 loc2:Silicondust HDHomeRun Tuner 1016E1A1-0.
Tue 4/13 10:21:52.867 [MainMsg@aa467] Didn't find TS pin in BDA tuner (QAM).
Tue 4/13 10:21:52.867 [MainMsg@aa467] Capture filter input pin mediatype clsid ({71985F41-1CA1-11D3-9CC8-00C04F7971E0}).
Tue 4/13 10:21:52.867 [MainMsg@aa467] Can't connect Tuner to Capture Filter (QAM).
Tue 4/13 10:21:52.868 [MainMsg@aa467] try connect BDA tuner 'ATI BDA Digital Tuner' (@device:pnp:\\?\usb#vid_0438&pid_b003#121713#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{eec5a519-643f-4a74-bc7f-5ce7d46fefd5}) to QAM
Tue 4/13 10:21:52.869 [MainMsg@aa467] checking mfr vendor, '0438' '' (class:2, 0)
Tue 4/13 10:21:52.870 [MainMsg@aa467] Tuner not sharing the same device with Capture, try next one. (QAM) state:1 loc1:usb:ATI Black Mamba                                          loc2:Silicondust HDHomeRun Tuner 1016E1A1-0.
Tue 4/13 10:21:52.870 [MainMsg@aa467] Didn't find TS pin in BDA tuner (QAM).
Tue 4/13 10:21:52.870 [MainMsg@aa467] Capture filter input pin mediatype clsid ({71985F41-1CA1-11D3-9CC8-00C04F7971E0}).
Tue 4/13 10:21:52.870 [MainMsg@aa467] Can't connect Tuner to Capture Filter (QAM).
Tue 4/13 10:21:52.871 [MainMsg@aa467] try connect BDA tuner 'Silicondust HDHomeRun Tuner 1016E1A1-0' (@device:sw:{71985F48-1CA1-11D3-9CC8-00C04F7971E0}\Silicondust HDHomeRun Tuner 1016E1A1-0) to QAM
Tue 4/13 10:21:52.871 [MainMsg@aa467] checking mfr vendor, '' '' (class:0, 0)
Tue 4/13 10:21:52.871 [MainMsg@aa467] Drop DBA network tuner (Source Fileter) (redundant filter).
Tue 4/13 10:21:52.872 [MainMsg@aa467] UnmapPID on TIF pin total:2 
Tue 4/13 10:21:52.872 [MainMsg@aa467] CAM:Setup PMT dump CapInfo:0x4da66008
Tue 4/13 10:21:52.872 [MainMsg@aa467] CAM:Setup program filter dump CapInfo:0x4da66008
Tue 4/13 10:21:52.872 [MainMsg@aa467] Capture filters are connected
Tue 4/13 10:21:52.872 [MainMsg@aa467] Encoding to file \\192.168.1.110\FREC\ThePriceIsRight-8417425-1.mpg
Tue 4/13 10:21:52.873 [MainMsg@aa467] setupEncoding0 Trace27 
Tue 4/13 10:21:52.873 [MainMsg@aa467] setupEncoding0 Trace28 
Tue 4/13 10:21:52.873 [MainMsg@aa467] startEncoding0 called for 'Silicondust HDHomeRun Tuner 1016E1A1-0-0'
Tue 4/13 10:21:53.123 [MainMsg@aa467] GetBroadcastStandard QAM for device:'Silicondust HDHomeRun Tuner 1016E1A1-0-0'
Tue 4/13 10:21:53.123 [MainMsg@aa467] autotune0 digital tuner 'Silicondust HDHomeRun Tuner 1016E1A1-0-0' num=116-1008-189 (ver 3.1)
Tue 4/13 10:21:53.123 [MainMsg@aa467] Splitter Filter set output mpeg2 format 
Tue 4/13 10:21:53.973 [MainMsg@aa467] DONE: autotune0 hr=0x0 locked:1
Tue 4/13 10:21:53.973 [Seeker@7f9d70] RootFile=\\192.168.1.110\FREC fstype=null fileLength=1102235648
Tue 4/13 10:21:53.974 [Seeker@7f9d70] SEEKER HAS DETECTED A HALT IN THE ENCODER...TRYING TO RESET IT
Tue 4/13 10:21:53.974 [Seeker@7f9d70] VF.submitJob(VFJob[InactiveFile r=0.0 t=0 file=null ifn=\\192.168.1.110\FREC\TheDrOzShow-DrOzsUltimateBackPainClinic-8498054-0.mpg])
Tue 4/13 10:21:53.974 [MainMsg@aa467] stopEncoding0 called (config:0x49000)
Tue 4/13 10:21:53.974 [MainMsg@aa467] stopEncoding0 trace 1 0x4addf3d4
Tue 4/13 10:21:53.974 [MainMsg@aa467] stopEncoding0 trace 2
Tue 4/13 10:21:53.974 [MainMsg@aa467] stopEncoding0 trace 3 0x4bd0e32c
Tue 4/13 10:21:53.983 [MainMsg@aa467] stopEncoding0 trace 4
Tue 4/13 10:21:53.983 [MainMsg@aa467] Stopped graph res=0x0
Tue 4/13 10:21:53.983 [MainMsg@aa467] stopEncoding0 trace 5
Tue 4/13 10:21:53.986 [Seeker@7f9d70] MediaFile startSegment enc=null MediaFile[id=8536001 A[8498054,8495996,"The Dr. Oz Show",20361@0413.10:00,60] host=pixpvr encodedBy=Silicondust HDHomeRun Tuner 1016E1A1-1 WFLDDT format=MPEG2-PS 0:00:00 20640 kbps [#0 Video[MPEG2-Video 59.94006 fps 1280x720 16:9 progressive]#1 Audio[AC3 48000 Hz 2 channels 448 kbps MAIN idx=1 id=bd-81010002 eng ]#2 Audio[AC3 48000 Hz 1 channels 192 kbps idx=2 id=bd-82010002 spa ]] \\192.168.1.110\FREC\TheDrOzShow-DrOzsUltimateBackPainClinic-8498054-0.mpg, Seg0[Tue 4/13 10:12:12.834-Tue 4/13 10:21:53.983]]
Tue 4/13 10:21:53.987 [Seeker@7f9d70] MediaFile created subfile:\\192.168.1.110\FREC\TheDrOzShow-DrOzsUltimateBackPainClinic-8498054-1.mpg MediaFile[id=8536001 A[8498054,8495996,"The Dr. Oz Show",20361@0413.10:00,60] host=pixpvr encodedBy=Silicondust HDHomeRun Tuner 1016E1A1-1 WFLDDT format=MPEG2-PS 0:00:00 20640 kbps [#0 Video[MPEG2-Video 59.94006 fps 1280x720 16:9 progressive]#1 Audio[AC3 48000 Hz 2 channels 448 kbps MAIN idx=1 id=bd-81010002 eng ]#2 Audio[AC3 48000 Hz 1 channels 192 kbps idx=2 id=bd-82010002 spa ]] \\192.168.1.110\FREC\TheDrOzShow-DrOzsUltimateBackPainClinic-8498054-0.mpg, Seg0[Tue 4/13 10:12:12.834-Tue 4/13 10:21:53.983]]
Tue 4/13 10:21:53.988 [Seeker@7f9d70] teardownGraph0 called for device='Silicondust HDHomeRun Tuner 1016E1A1-1'
Tue 4/13 10:21:53.988 [Seeker@7f9d70] QAM:CtrlData.... 0x4addf170
Tue 4/13 10:21:53.988 [Seeker@7f9d70] QAM: QAM Ctrl relesed Silicondust HDHomeRun Tuner 1016E1A1-1-0
Tue 4/13 10:21:53.988 [Seeker@7f9d70] teardownGraph0 step-1 
Tue 4/13 10:21:53.988 [Seeker@7f9d70] teardownGraph0 step0 
Tue 4/13 10:21:53.988 [Seeker@7f9d70] teardownGraph0 step1 
Tue 4/13 10:21:53.988 [Seeker@7f9d70] teardownGraph0 step2 
Tue 4/13 10:21:53.989 [Seeker@7f9d70] teardownGraph0 step3 
Tue 4/13 10:21:53.989 [Seeker@7f9d70] teardownGraph0 step4 
Tue 4/13 10:21:54.350 [Seeker@7f9d70] teardownGraph0 step5 
Tue 4/13 10:21:54.350 [Seeker@7f9d70] teardownGraph0 step6. 
Tue 4/13 10:21:54.350 [Seeker@7f9d70] teardownGraph0 pBuilder. 
Tue 4/13 10:21:54.350 [Seeker@7f9d70] teardownGraph0 pGraph. 
Tue 4/13 10:21:54.451 [Seeker@7f9d70] teardownGraph0 step8 
Tue 4/13 10:21:54.451 [Seeker@7f9d70] teardownGraph0 step9 
Tue 4/13 10:21:54.451 [Seeker@7f9d70] teardownGraph0 step10 
Tue 4/13 10:21:54.451 [Seeker@7f9d70] initGraph0 (ver 2.0.2) called capDev='Silicondust HDHomeRun Tuner 1016E1A1-1-0', Country:'United States of America', TuningMode:Cable, TunerType: Cap:0x49000
Tue 4/13 10:21:54.474 [Thread-137@1f468d0] AVINF:(bytes:322) Silicondust HDHomeRun Tuner 1016E1A1-0-0 AV-INF|f=MPEG2-PS;br=20576000;[bf=vid;f=MPEG2-Video;fps=29.970030;fpsn=30000;fpsd=1001;ar=1.777778;arn=16;ard=9;w=1920;h=1080;lace=1;index=0;tag=e0;main=yes];[bf=aud;f=AC3;sr=48000;br=384000;ch=6;index=1;tag=bd-81010002;lang=eng ;main=yes];[bf=aud;f=AC3;sr=48000;br=192000;ch=2;index=2;tag=bd-82010002;lang=spa ;main=no];
Tue 4/13 10:21:54.474 [MsgManager@106737f] Setting media file format for MediaFile[id=8535999 A[8417425,1264536,"The Price Is Right",20454@0413.10:00,60] host=pixpvr encodedBy=Silicondust HDHomeRun Tuner 1016E1A1-0 WBBMDT format=MPEG2-PS 0:00:00 20576 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=bd-81010002 eng ]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=bd-82010002 spa ]] \\192.168.1.110\FREC\ThePriceIsRight-8417425-0.mpg, Seg0[Tue 4/13 10:11:46.466-Tue 4/13 10:21:51.839], Seg1[Tue 4/13 10:21:51.912-Wed 12/31 18:00:00.000]] to be [B@10d39ec
Tue 4/13 10:21:54.475 [Thread-138@5c894c] PID Filter: Set program ID into HDHR programID:0x1 channel:0 
Tue 4/13 10:21:54.708 [Seeker@7f9d70] BDA capture is found on location:'Silicondust HDHomeRun Tuner 1016E1A1-1' id:'' for Silicondust HDHomeRun Tuner 1016E1A1-1-0 (@device:sw:{FD0A5AF4-B41D-11D2-9C95-00C04F7971E0}\Silicondust HDHomeRun Tuner 1016E1A1-1) (it's a BDA only).
Tue 4/13 10:21:54.708 [Seeker@7f9d70] Add BDA filters (capture:'@device:sw:{FD0A5AF4-B41D-11D2-9C95-00C04F7971E0}\Silicondust HDHomeRun Tuner 1016E1A1-1') for device=Silicondust HDHomeRun Tuner 1016E1A1-1
Tue 4/13 10:21:54.709 [Seeker@7f9d70] It's a HDHomeRun QAM(US Cable) tuner
You will notice that certain lines say SEEKER HAS DETECTED A HALT IN THE ENCODER.... but i don't see anything unusual before or after

Any suggestions, or ideas, more info needed, let me know

Thanks all!
Pix64
Reply With Quote
  #2  
Old 04-13-2010, 10:17 AM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
  
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
Here is the rest of the debug info from the same minute of time..

Code:
Tue 4/13 10:21:54.709 [Seeker@7f9d70] Setup QAM BDATuningSpace (7  0)
Tue 4/13 10:21:54.709 [Seeker@7f9d70] LoadTuneTable QAM
Tue 4/13 10:21:54.717 [Seeker@7f9d70] QAM:Setup BDA QAM
Tue 4/13 10:21:54.725 [Seeker@7f9d70] BDA Filters are loaded
Tue 4/13 10:21:54.726 [MainMsg@aa467] switchToConnector0 tuningMode:Cable
Tue 4/13 10:21:54.726 [MainMsg@aa467] setEncodingProperties0 1270273336 Fair
Tue 4/13 10:21:54.726 [MainMsg@aa467] Set encoding property audiooutputmode to 0
Tue 4/13 10:21:54.726 [MainMsg@aa467] Set encoding property audiocrc to 0
Tue 4/13 10:21:54.726 [MainMsg@aa467] Set encoding property gopsize to 15
Tue 4/13 10:21:54.726 [MainMsg@aa467] Set encoding property videobitrate to 1700000
Tue 4/13 10:21:54.726 [MainMsg@aa467] Set encoding property inversetelecine to 0
Tue 4/13 10:21:54.726 [MainMsg@aa467] Set encoding property closedgop to 0
Tue 4/13 10:21:54.726 [MainMsg@aa467] Set encoding property vbr to 0
Tue 4/13 10:21:54.726 [MainMsg@aa467] Set encoding property outputstreamtype to 10
Tue 4/13 10:21:54.726 [MainMsg@aa467] Set encoding property width to 480
Tue 4/13 10:21:54.726 [MainMsg@aa467] Set encoding property height to 480
Tue 4/13 10:21:54.727 [MainMsg@aa467] Set encoding property audiobitrate to 256
Tue 4/13 10:21:54.727 [MainMsg@aa467] Set encoding property audiosampling to 48000
Tue 4/13 10:21:54.727 [MainMsg@aa467] Set encoding property disablefilter to 1
Tue 4/13 10:21:54.727 [MainMsg@aa467] Set encoding property medianfilter to 3
Tue 4/13 10:21:54.727 [MainMsg@aa467] Set encoding property fps to 30
Tue 4/13 10:21:54.727 [MainMsg@aa467] Set encoding property ipb to 0
Tue 4/13 10:21:54.727 [MainMsg@aa467] Set encoding property deinterlace to 0
Tue 4/13 10:21:54.727 [MainMsg@aa467] Set encoding property aspectratio to 1
Tue 4/13 10:21:54.727 [MainMsg@aa467] setupEncoding0 called for 1270273336 'Silicondust HDHomeRun Tuner 1016E1A1-1-0' (ver 1.0)
Tue 4/13 10:21:54.727 [MainMsg@aa467] Connecting capture Filters. (@device:sw:{FD0A5AF4-B41D-11D2-9C95-00C04F7971E0}\Silicondust HDHomeRun Tuner 1016E1A1-1)
Tue 4/13 10:21:54.731 [MainMsg@aa467] try connect BDA tuner 'Hauppauge WinTV-7164 BDA ATSC/QAM Tuner' (@device:pnp:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{8171d824-ce71-455b-8e02-f7bae3c59700}) to QAM
Tue 4/13 10:21:54.731 [MainMsg@aa467] checking mfr vendor, '1131' '' (class:2, 0)
Tue 4/13 10:21:54.732 [MainMsg@aa467] Tuner not sharing the same device with Capture, try next one. (QAM) state:1 loc1:pci:2-0 loc2:Silicondust HDHomeRun Tuner 1016E1A1-1.
Tue 4/13 10:21:54.732 [MainMsg@aa467] Didn't find TS pin in BDA tuner (QAM).
Tue 4/13 10:21:54.732 [MainMsg@aa467] Capture filter input pin mediatype clsid ({71985F41-1CA1-11D3-9CC8-00C04F7971E0}).
Tue 4/13 10:21:54.733 [MainMsg@aa467] Can't connect Tuner to Capture Filter (QAM).
Tue 4/13 10:21:54.734 [MainMsg@aa467] try connect BDA tuner 'Hauppauge WinTV-7164 BDA ATSC/QAM Tuner' (@device:pnp:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{8171d824-ce71-455b-8e02-f7bae3c59701}) to QAM
Tue 4/13 10:21:54.734 [MainMsg@aa467] checking mfr vendor, '1131' '' (class:2, 0)
Tue 4/13 10:21:54.735 [MainMsg@aa467] Tuner not sharing the same device with Capture, try next one. (QAM) state:1 loc1:pci:2-0 loc2:Silicondust HDHomeRun Tuner 1016E1A1-1.
Tue 4/13 10:21:54.735 [MainMsg@aa467] Didn't find TS pin in BDA tuner (QAM).
Tue 4/13 10:21:54.735 [MainMsg@aa467] Capture filter input pin mediatype clsid ({71985F41-1CA1-11D3-9CC8-00C04F7971E0}).
Tue 4/13 10:21:54.735 [MainMsg@aa467] Can't connect Tuner to Capture Filter (QAM).
Tue 4/13 10:21:55.065 [MainMsg@aa467] try connect BDA tuner 'Hauppauge WinTV 418 BDA Tuner' (@device:pnp:\\?\pci#ven_14f1&dev_5b7a&subsys_74440070&rev_00#4&2966ab86&0&28a4#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{e01e1072-3df3-4c23-b99f-6a27a7cc7cd2}) to QAM
Tue 4/13 10:21:55.066 [MainMsg@aa467] checking mfr vendor, '14f1' '' (class:2, 0)
Tue 4/13 10:21:55.067 [MainMsg@aa467] Tuner not sharing the same device with Capture, try next one. (QAM) state:1 loc1:pci:5-5 loc2:Silicondust HDHomeRun Tuner 1016E1A1-1.
Tue 4/13 10:21:55.067 [MainMsg@aa467] Didn't find TS pin in BDA tuner (QAM).
Tue 4/13 10:21:55.067 [MainMsg@aa467] Capture filter input pin mediatype clsid ({71985F41-1CA1-11D3-9CC8-00C04F7971E0}).
Tue 4/13 10:21:55.067 [MainMsg@aa467] Can't connect Tuner to Capture Filter (QAM).
Tue 4/13 10:21:55.068 [MainMsg@aa467] try connect BDA tuner 'ATI BDA Digital Tuner' (@device:pnp:\\?\usb#vid_0438&pid_b003#121713#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{eec5a519-643f-4a74-bc7f-5ce7d46fefd5}) to QAM
Tue 4/13 10:21:55.068 [MainMsg@aa467] checking mfr vendor, '0438' '' (class:2, 0)
Tue 4/13 10:21:55.069 [MainMsg@aa467] Tuner not sharing the same device with Capture, try next one. (QAM) state:1 loc1:usb:ATI Black Mamba                                          loc2:Silicondust HDHomeRun Tuner 1016E1A1-1.
Tue 4/13 10:21:55.070 [MainMsg@aa467] Didn't find TS pin in BDA tuner (QAM).
Tue 4/13 10:21:55.070 [MainMsg@aa467] Capture filter input pin mediatype clsid ({71985F41-1CA1-11D3-9CC8-00C04F7971E0}).
Tue 4/13 10:21:55.070 [MainMsg@aa467] Can't connect Tuner to Capture Filter (QAM).
Tue 4/13 10:21:55.071 [MainMsg@aa467] try connect BDA tuner 'Silicondust HDHomeRun Tuner 1016E1A1-0' (@device:sw:{71985F48-1CA1-11D3-9CC8-00C04F7971E0}\Silicondust HDHomeRun Tuner 1016E1A1-0) to QAM
Tue 4/13 10:21:55.071 [MainMsg@aa467] checking mfr vendor, '' '' (class:0, 0)
Tue 4/13 10:21:55.071 [MainMsg@aa467] Tuner not sharing the same device with Capture, try next one. (QAM) state:1 loc1:Silicondust HDHomeRun Tuner 1016E1A1-0 loc2:Silicondust HDHomeRun Tuner 1016E1A1-1.
Tue 4/13 10:21:55.071 [MainMsg@aa467] Didn't find TS pin in BDA tuner (QAM).
Tue 4/13 10:21:55.071 [MainMsg@aa467] Capture filter input pin mediatype clsid ({71985F41-1CA1-11D3-9CC8-00C04F7971E0}).
Tue 4/13 10:21:55.071 [MainMsg@aa467] Can't connect Tuner to Capture Filter (QAM).
Tue 4/13 10:21:55.320 [MainMsg@aa467] try connect BDA tuner 'Silicondust HDHomeRun Tuner 1016E1A1-1' (@device:sw:{71985F48-1CA1-11D3-9CC8-00C04F7971E0}\Silicondust HDHomeRun Tuner 1016E1A1-1) to QAM
Tue 4/13 10:21:55.320 [MainMsg@aa467] checking mfr vendor, '' '' (class:0, 0)
Tue 4/13 10:21:55.321 [MainMsg@aa467] Drop DBA network tuner (Source Fileter) (redundant filter).
Tue 4/13 10:21:55.321 [MainMsg@aa467] UnmapPID on TIF pin total:2 
Tue 4/13 10:21:55.321 [MainMsg@aa467] CAM:Setup PMT dump CapInfo:0x4bb6d538
Tue 4/13 10:21:55.321 [MainMsg@aa467] CAM:Setup program filter dump CapInfo:0x4bb6d538
Tue 4/13 10:21:55.321 [MainMsg@aa467] Capture filters are connected
Tue 4/13 10:21:55.321 [MainMsg@aa467] Encoding to file \\192.168.1.110\FREC\TheDrOzShow-DrOzsUltimateBackPainClinic-8498054-1.mpg
Tue 4/13 10:21:55.322 [MainMsg@aa467] setupEncoding0 Trace27 
Tue 4/13 10:21:55.322 [MainMsg@aa467] setupEncoding0 Trace28 
Tue 4/13 10:21:55.322 [MainMsg@aa467] startEncoding0 called for 'Silicondust HDHomeRun Tuner 1016E1A1-1-0'
Tue 4/13 10:21:55.572 [MainMsg@aa467] GetBroadcastStandard QAM for device:'Silicondust HDHomeRun Tuner 1016E1A1-1-0'
Tue 4/13 10:21:55.572 [MainMsg@aa467] autotune0 digital tuner 'Silicondust HDHomeRun Tuner 1016E1A1-1-0' num=117-1008-190 (ver 3.1)
Tue 4/13 10:21:55.572 [MainMsg@aa467] Splitter Filter set output mpeg2 format 
Tue 4/13 10:21:56.441 [MainMsg@aa467] DONE: autotune0 hr=0x0 locked:1
Tue 4/13 10:21:56.441 [Seeker@7f9d70] RootFile=\\192.168.1.110\FREC fstype=null fileLength=830511104
Tue 4/13 10:21:56.441 [Seeker@7f9d70] SEEKER HAS DETECTED A HALT IN THE ENCODER...TRYING TO RESET IT
Tue 4/13 10:21:56.441 [Seeker@7f9d70] VF.submitJob(VFJob[InactiveFile r=0.0 t=0 file=null ifn=\\192.168.1.110\FREC\Today-8417380-0.mpg])
Tue 4/13 10:21:56.441 [MainMsg@aa467] stopEncoding0 called (config:0x8810)
Tue 4/13 10:21:56.442 [MainMsg@aa467] stopEncoding0 trace 1 0x4d9e9afc
Tue 4/13 10:21:56.442 [MainMsg@aa467] stopEncoding0 trace 2
Tue 4/13 10:21:56.442 [MainMsg@aa467] stopEncoding0 trace 3 0x4bd1add4
Tue 4/13 10:21:56.668 [MainMsg@aa467] stopEncoding0 trace 4
Tue 4/13 10:21:56.668 [MainMsg@aa467] Stopped graph res=0x0
Tue 4/13 10:21:56.668 [MainMsg@aa467] stopEncoding0 trace 5
Tue 4/13 10:21:56.670 [Seeker@7f9d70] MediaFile startSegment enc=null MediaFile[id=8536003 A[8417380,8415394,"Today",20452@0413.07:00,240] host=pixpvr encodedBy=Hauppauge WinTV-7164 Analog Capture WMAQDT format=MPEG2-PS 0:00:00 20576 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=bd-81010002 eng ]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=bd-82010002 spa ]] \\192.168.1.110\FREC\Today-8417380-0.mpg, Seg0[Tue 4/13 10:12:40.437-Tue 4/13 10:21:56.668]]
Tue 4/13 10:21:56.671 [Seeker@7f9d70] MediaFile created subfile:\\192.168.1.110\FREC\Today-8417380-1.mpg MediaFile[id=8536003 A[8417380,8415394,"Today",20452@0413.07:00,240] host=pixpvr encodedBy=Hauppauge WinTV-7164 Analog Capture WMAQDT format=MPEG2-PS 0:00:00 20576 kbps [#0 Video[MPEG2-Video 29.97003 fps 1920x1080 16:9 interlaced]#1 Audio[AC3 48000 Hz 6 channels 384 kbps MAIN idx=1 id=bd-81010002 eng ]#2 Audio[AC3 48000 Hz 2 channels 192 kbps idx=2 id=bd-82010002 spa ]] \\192.168.1.110\FREC\Today-8417380-0.mpg, Seg0[Tue 4/13 10:12:40.437-Tue 4/13 10:21:56.668]]
Tue 4/13 10:21:56.680 [Seeker@7f9d70] teardownGraph0 called for device='Hauppauge WinTV-7164 Analog Capture'
Tue 4/13 10:21:56.680 [Seeker@7f9d70] QAM:CtrlData.... 0x4da4a748
Tue 4/13 10:21:56.680 [Seeker@7f9d70] QAM: QAM Ctrl relesed Hauppauge WinTV-7164 Analog Capture-0
Tue 4/13 10:21:56.681 [Seeker@7f9d70] teardownGraph0 step-1 
Tue 4/13 10:21:56.681 [Seeker@7f9d70] teardownGraph0 step0 
Tue 4/13 10:21:56.681 [Seeker@7f9d70] teardownGraph0 step1 
Tue 4/13 10:21:56.681 [Seeker@7f9d70] teardownGraph0 step2 
Tue 4/13 10:21:56.682 [Seeker@7f9d70] teardownGraph0 step3 
Tue 4/13 10:21:56.682 [Seeker@7f9d70] teardownGraph0 step4 
Tue 4/13 10:21:56.684 [Seeker@7f9d70] teardownGraph0 step5 
Tue 4/13 10:21:56.684 [Seeker@7f9d70] teardownGraph0 step6. 
Tue 4/13 10:21:56.684 [Seeker@7f9d70] teardownGraph0 pBuilder. 
Tue 4/13 10:21:56.684 [Seeker@7f9d70] teardownGraph0 pGraph. 
Tue 4/13 10:21:56.785 [Seeker@7f9d70] teardownGraph0 step8 
Tue 4/13 10:21:56.786 [Seeker@7f9d70] teardownGraph0 step9 
Tue 4/13 10:21:56.786 [Seeker@7f9d70] teardownGraph0 step10 
Tue 4/13 10:21:56.786 [Seeker@7f9d70] initGraph0 (ver 2.0.2) called capDev='Hauppauge WinTV-7164 Analog Capture-0', Country:'United States of America', TuningMode:Cable, TunerType: Cap:0x8810
Tue 4/13 10:21:56.793 [Seeker@7f9d70] BAD Tuner index :1 dev:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\{bd5b5aea-2141-48a8-8758-f0cf5e0bc800} name:@device:pnp:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\{bd5b5aea-2141-48a8-8758-f0cf5e0bc800} loc:pci:2-0 (1 0) select
Tue 4/13 10:21:56.793 [Seeker@7f9d70] Check BDA capture device:Hauppauge WinTV-7164 Analog Capture-0 (\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\{bd5b5aea-2141-48a8-8758-f0cf5e0bc800}) on location:'pci:2-0' id:'PCI\VEN_1131&DEV_7164&SUBSYS_88800070&REV_81' [state1, index:0] .
Tue 4/13 10:21:56.796 [Seeker@7f9d70] >>BDA capture device found:@device:pnp:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{b3e3d165-54eb-4b9e-a805-1756644fa400}; loc:'pci:2-0' id:'PCI\VEN_1131&DEV_7164&SUBSYS_88800070&REV_81' guid:b3e3d165-54eb-4b9e-a805-1756644fa400 desc:Hauppauge WinTV-HVR-2250 (8880)
Tue 4/13 10:21:56.796 [Seeker@7f9d70] BDA Capture found: (0) @device:pnp:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{b3e3d165-54eb-4b9e-a805-1756644fa400} on loc pci:2-0.
Tue 4/13 10:21:56.796 [Seeker@7f9d70] >>BDA capture device found:@device:pnp:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{b3e3d165-54eb-4b9e-a805-1756644fa401}; loc:'pci:2-0' id:'PCI\VEN_1131&DEV_7164&SUBSYS_88800070&REV_81' guid:b3e3d165-54eb-4b9e-a805-1756644fa401 desc:Hauppauge WinTV-HVR-2250 (8880)
Tue 4/13 10:21:56.796 [Seeker@7f9d70] BDA Capture found: (1) @device:pnp:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{b3e3d165-54eb-4b9e-a805-1756644fa401} on loc pci:2-0.
Tue 4/13 10:21:56.796 [Seeker@7f9d70] >>BDA capture device found:@device:pnp:\\?\pci#ven_14f1&dev_5b7a&subsys_74440070&rev_00#4&2966ab86&0&28a4#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{e851bfaf-aeda-493c-a817-73b527c0b765}; loc:'pci:5-5' id:'PCI\VEN_14F1&DEV_5B7A&SUBSYS_74440070&REV_00' guid:e851bfaf-aeda-493c-a817-73b527c0b765 desc:Hauppauge WinTV HVR-1600 NTSC/ATSC/QAM Combo
Tue 4/13 10:21:56.796 [Seeker@7f9d70] >>BDA capture device found:@device:pnp:\\?\root#system#0000#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{03884cb6-e89a-4deb-b69e-8dc621686e6a}&global; loc:'' id:'root\swenum' guid:03884cb6-e89a-4deb-b69e-8dc621686e6a desc:Plug and Play Software Device Enumerator
Tue 4/13 10:21:56.796 [Seeker@7f9d70] >>BDA capture device found:@device:pnp:\\?\root#system#0000#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{8e60217d-a2ee-47f8-b0c5-0f44c55f66dc}&global; loc:'' id:'root\swenum' guid:8e60217d-a2ee-47f8-b0c5-0f44c55f66dc desc:Plug and Play Software Device Enumerator
Tue 4/13 10:21:56.796 [Seeker@7f9d70] >>BDA capture device found:@device:pnp:\\?\usb#vid_0438&pid_b003#121713#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{30ca4e99-f538-442e-ade9-9bce73da67a3}; loc:'usb:ATI Black Mamba                                         ' id:'USB\Vid_0438&Pid_b003&Rev_0101' guid:30ca4e99-f538-442e-ade9-9bce73da67a3 desc:ATI Unified AVStream Driver
Tue 4/13 10:21:56.796 [Seeker@7f9d70] >>BDA capture device found:@device:sw:{FD0A5AF4-B41D-11D2-9C95-00C04F7971E0}\Silicondust HDHomeRun Tuner 1016E1A1-0; loc:'Silicondust HDHomeRun Tuner 1016E1A1-0' id:'' guid: desc:
Tue 4/13 10:21:56.796 [Seeker@7f9d70] >>BDA capture device found:@device:sw:{FD0A5AF4-B41D-11D2-9C95-00C04F7971E0}\Silicondust HDHomeRun Tuner 1016E1A1-1; loc:'Silicondust HDHomeRun Tuner 1016E1A1-1' id:'' guid: desc:
Tue 4/13 10:21:56.797 [Seeker@7f9d70] Mutil-tuner(2) BDA capture is found on location:'pci:2-0' id:'PCI\VEN_1131&DEV_7164&SUBSYS_88800070&REV_81' for Hauppauge WinTV-7164 Analog Capture-0. (@device:pnp:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{b3e3d165-54eb-4b9e-a805-1756644fa400}, 0).
Tue 4/13 10:21:56.797 [Seeker@7f9d70] Add BDA filters (capture:'@device:pnp:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{b3e3d165-54eb-4b9e-a805-1756644fa400}') for device=Hauppauge WinTV-7164 Analog Capture
Tue 4/13 10:21:56.797 [Seeker@7f9d70] Not specify TV type ( Network type  ), to search matching one.
Tue 4/13 10:21:56.806 [Seeker@7f9d70] BDA Filters are loaded
Tue 4/13 10:21:56.807 [MainMsg@aa467] switchToConnector0 tuningMode:Cable
Tue 4/13 10:21:56.807 [MainMsg@aa467] setEncodingProperties0 1270795296 MPEG2 Max Quality
Tue 4/13 10:21:56.807 [MainMsg@aa467] Set encoding property audiooutputmode to 0
Tue 4/13 10:21:56.807 [MainMsg@aa467] Set encoding property audiocrc to 0
Tue 4/13 10:21:56.807 [MainMsg@aa467] Set encoding property gopsize to 15
Tue 4/13 10:21:56.807 [MainMsg@aa467] Set encoding property videobitrate to 12000000
Tue 4/13 10:21:56.807 [MainMsg@aa467] Set encoding property inversetelecine to 0
Tue 4/13 10:21:56.807 [MainMsg@aa467] Set encoding property closedgop to 0
Tue 4/13 10:21:56.807 [MainMsg@aa467] Set encoding property vbr to 0
Tue 4/13 10:21:56.807 [MainMsg@aa467] Set encoding property outputstreamtype to 0
Tue 4/13 10:21:56.808 [MainMsg@aa467] Set encoding property width to 720
Tue 4/13 10:21:56.808 [MainMsg@aa467] Set encoding property height to 480
Tue 4/13 10:21:56.808 [MainMsg@aa467] Set encoding property audiobitrate to 384
Tue 4/13 10:21:56.808 [MainMsg@aa467] Set encoding property audiosampling to 48000
Tue 4/13 10:21:56.808 [MainMsg@aa467] Set encoding property disablefilter to 1
Tue 4/13 10:21:56.808 [MainMsg@aa467] Set encoding property medianfilter to 3
Tue 4/13 10:21:56.808 [MainMsg@aa467] Set encoding property fps to 30
Tue 4/13 10:21:56.808 [MainMsg@aa467] Set encoding property ipb to 0
Tue 4/13 10:21:56.808 [MainMsg@aa467] Set encoding property deinterlace to 0
Tue 4/13 10:21:56.808 [MainMsg@aa467] Set encoding property aspectratio to 1
Tue 4/13 10:21:56.808 [MainMsg@aa467] setupEncoding0 called for 1270795296 'Hauppauge WinTV-7164 Analog Capture-0' (ver 1.0)
Tue 4/13 10:21:56.808 [MainMsg@aa467] Connecting capture Filters. (@device:pnp:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{b3e3d165-54eb-4b9e-a805-1756644fa400})
Tue 4/13 10:21:56.808 [MainMsg@aa467] Network not specified, Try Network type ATSC
Tue 4/13 10:21:56.808 [MainMsg@aa467] Setup ATSC BDATuningSpace (3  0)
Tue 4/13 10:21:56.809 [MainMsg@aa467] QAM:Got capture drv info for QAM mfg:'Hauppauge' Hauppauge WinTV-7164 Analog Capture-0
Tue 4/13 10:21:56.810 [MainMsg@aa467] QAM:supported tag:HauppaugeQAM
Tue 4/13 10:21:56.810 [MainMsg@aa467] It's a QAM tuner
Tue 4/13 10:21:56.810 [MainMsg@aa467] LoadTuneTable QAM
Tue 4/13 10:21:56.822 [MainMsg@aa467] try connect BDA tuner 'Hauppauge WinTV-7164 BDA ATSC/QAM Tuner' (@device:pnp:\\?\pci#ven_1131&dev_7164&subsys_88800070&rev_81#4&c4c8321&0&0020#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{8171d824-ce71-455b-8e02-f7bae3c59700}) to ATSC
Tue 4/13 10:21:56.822 [MainMsg@aa467] checking mfr vendor, '1131' '1131' (class:2, 3)
Tue 4/13 10:21:56.828 [MainMsg@aa467] UnmapPID on TIF pin total:2 
Tue 4/13 10:21:56.828 [MainMsg@aa467] CAM:Setup PMT dump CapInfo:0x4bbecc20
Tue 4/13 10:21:56.828 [MainMsg@aa467] Capture filters are connected
Tue 4/13 10:21:56.828 [MainMsg@aa467] QAM:Got capture drv info for QAM mfg:'Hauppauge' Hauppauge WinTV-7164 Analog Capture-0
Tue 4/13 10:21:56.828 [MainMsg@aa467] QAM: Hauppauge QAM interface found (3) hr=0x0 at Hauppauge WinTV-7164 Analog Capture-0 
Tue 4/13 10:21:56.828 [MainMsg@aa467] QAM:supported tag:HauppaugeQAM
Tue 4/13 10:21:56.829 [MainMsg@aa467] QAM: Hauppauge QAM Setup mod: 11 for ATSC Cable, (3, hr=0x0) at Hauppauge WinTV-7164 Analog Capture-0 
Tue 4/13 10:21:56.829 [MainMsg@aa467] Encoding to file \\192.168.1.110\FREC\Today-8417380-1.mpg
Tue 4/13 10:21:56.829 [MainMsg@aa467] setupEncoding0 Trace27 
Tue 4/13 10:21:56.829 [MainMsg@aa467] setupEncoding0 Trace28 
Tue 4/13 10:21:56.830 [MainMsg@aa467] startEncoding0 called for 'Hauppauge WinTV-7164 Analog Capture-0'
Tue 4/13 10:21:56.850 [MainMsg@aa467] GetBroadcastStandard ATSC for device:'Hauppauge WinTV-7164 Analog Capture-0'
Tue 4/13 10:21:56.850 [MainMsg@aa467] autotune0 digital tuner 'Hauppauge WinTV-7164 Analog Capture-0' num=117-5-1 (ver 3.1)
Tue 4/13 10:21:56.850 [MainMsg@aa467] Splitter Filter set output mpeg2 format 
Tue 4/13 10:21:56.850 [MainMsg@aa467] QAM: Hauppauge QAM interface found (3) hr=0x0 at Hauppauge WinTV-7164 Analog Capture-0 
Tue 4/13 10:21:56.964 [Thread-147@1df1366] AVINF:(bytes:321) Silicondust HDHomeRun Tuner 1016E1A1-1-0 AV-INF|f=MPEG2-PS;br=20640000;[bf=vid;f=MPEG2-Video;fps=59.940060;fpsn=60000;fpsd=1001;ar=1.777778;arn=16;ard=9;w=1280;h=720;lace=0;index=0;tag=e0;main=yes];[bf=aud;f=AC3;sr=48000;br=448000;ch=2;index=1;tag=bd-81010002;lang=eng ;main=yes];[bf=aud;f=AC3;sr=48000;br=192000;ch=1;index=2;tag=bd-82010002;lang=spa ;main=no];
Tue 4/13 10:21:56.964 [MsgManager@106737f] Setting media file format for MediaFile[id=8536001 A[8498054,8495996,"The Dr. Oz Show",20361@0413.10:00,60] host=pixpvr encodedBy=Silicondust HDHomeRun Tuner 1016E1A1-1 WFLDDT format=MPEG2-PS 0:00:00 20640 kbps [#0 Video[MPEG2-Video 59.94006 fps 1280x720 16:9 progressive]#1 Audio[AC3 48000 Hz 2 channels 448 kbps MAIN idx=1 id=bd-81010002 eng ]#2 Audio[AC3 48000 Hz 1 channels 192 kbps idx=2 id=bd-82010002 spa ]] \\192.168.1.110\FREC\TheDrOzShow-DrOzsUltimateBackPainClinic-8498054-0.mpg, Seg0[Tue 4/13 10:12:12.834-Tue 4/13 10:21:53.983], Seg1[Tue 4/13 10:21:53.985-Wed 12/31 18:00:00.000]] to be [B@72a40a
Tue 4/13 10:21:56.965 [Thread-148@303c2e] PID Filter: Set program ID into HDHR programID:0x2 channel:0 
Tue 4/13 10:21:58.178 [MainMsg@aa467] DONE: autotune0 hr=0x0 locked:1
Tue 4/13 10:21:58.179 [Seeker@7f9d70] RootFile=\\192.168.1.110\FREC fstype=null fileLength=364024400
Tue 4/13 10:21:58.179 [Seeker@7f9d70] SEEKER HAS DETECTED A HALT IN THE ENCODER...TRYING TO RESET IT
Tue 4/13 10:21:58.179 [Seeker@7f9d70] VF.submitJob(VFJob[InactiveFile r=0.0 t=0 file=null ifn=\\192.168.1.110\FREC\TheView-8415366-0.mpg])
Tue 4/13 10:21:58.179 [MainMsg@aa467] stopEncoding0 called (config:0x810)
Tue 4/13 10:21:58.179 [MainMsg@aa467] stopEncoding0 trace 3 0x4bcf49ec
Tue 4/13 10:21:58.330 [MainMsg@aa467] stopEncoding0 trace 4
Tue 4/13 10:21:58.330 [MainMsg@aa467] Stopped graph res=0x0
Tue 4/13 10:21:58.330 [MainMsg@aa467] stopEncoding0 trace 5
Tue 4/13 10:21:58.333 [Seeker@7f9d70] MediaFile startSegment enc=null MediaFile[id=8536005 A[8415366,8415353,"The View",11653@0413.10:00,60] host=pixpvr encodedBy=Hauppauge WinTV-7164 Analog Capture #2 MPEG2 Max Quality format=MPEG2-PS 0:00:00 0 kbps [#0 Video[MPEG2-Video 29.97 fps 720x480 4:3 12000 kbps interlaced]#1 Audio[MP2 48000 Hz 2 channels 384 kbps]] \\192.168.1.110\FREC\TheView-8415366-0.mpg, Seg0[Tue 4/13 10:12:55.622-Tue 4/13 10:21:58.331]]
Tue 4/13 10:21:58.334 [Seeker@7f9d70] MediaFile created subfile:\\192.168.1.110\FREC\TheView-8415366-1.mpg MediaFile[id=8536005 A[8415366,8415353,"The View",11653@0413.10:00,60] host=pixpvr encodedBy=Hauppauge WinTV-7164 Analog Capture #2 MPEG2 Max Quality format=MPEG2-PS 0:00:00 0 kbps [#0 Video[MPEG2-Video 29.97 fps 720x480 4:3 12000 kbps interlaced]#1 Audio[MP2 48000 Hz 2 channels 384 kbps]] \\192.168.1.110\FREC\TheView-8415366-0.mpg, Seg0[Tue 4/13 10:12:55.622-Tue 4/13 10:21:58.331]]
Tue 4/13 10:21:58.335 [Seeker@7f9d70] teardownGraph0 called for device='Hauppauge WinTV-7164 Analog Capture'
Tue 4/13 10:21:58.335 [Seeker@7f9d70] teardownGraph0 step-1 
Tue 4/13 10:21:58.335 [Seeker@7f9d70] teardownGraph0 step0 
Tue 4/13 10:21:58.335 [Seeker@7f9d70] teardownGraph0 step1 
Tue 4/13 10:21:58.347 [Seeker@7f9d70] teardownGraph0 step2 
Tue 4/13 10:21:58.348 [Seeker@7f9d70] teardownGraph0 step3 
Tue 4/13 10:21:58.348 [Seeker@7f9d70] teardownGraph0 step4 
Tue 4/13 10:21:58.348 [Seeker@7f9d70] teardownGraph0 step5 
Tue 4/13 10:21:58.348 [Seeker@7f9d70] teardownGraph0 step6. 
Tue 4/13 10:21:58.348 [Seeker@7f9d70] teardownGraph0 pBuilder. 
Tue 4/13 10:21:58.348 [Seeker@7f9d70] teardownGraph0 pGraph. 
Tue 4/13 10:21:58.449 [Seeker@7f9d70] teardownGraph0 step8 
Tue 4/13 10:21:58.449 [Seeker@7f9d70] teardownGraph0 step9 
Tue 4/13 10:21:58.449 [Seeker@7f9d70] teardownGraph0 step10 
Tue 4/13 10:21:58.449 [Seeker@7f9d70] initGraph0 (ver 2.0.2) called capDev='Hauppauge WinTV-7164 Analog Capture-1', Country:'United States of America', TuningMode:, TunerType: Cap:0x810
Tue 4/13 10:21:58.449 [Seeker@7f9d70] Add analog filters for device=Hauppauge WinTV-7164 Analog Capture
Tue 4/13 10:21:58.454 [Seeker@7f9d70] Found the pin2 ;)
Tue 4/13 10:21:58.469 [Seeker@7f9d70] Found the pin2 ;)
Tue 4/13 10:21:58.477 [MainMsg@aa467] switchToConnector0 tuningMode:
Tue 4/13 10:21:58.477 [MainMsg@aa467] switchToConnector0 1256048912 type=2 index=1 country:1 format:1
Tue 4/13 10:21:58.561 [MainMsg@aa467] Crossbar route: video:5, auido:7
Tue 4/13 10:21:58.561 [MainMsg@aa467] DONE: switchToConnector0 1256048912 type=2 index=1
Tue 4/13 10:21:58.578 [MainMsg@aa467] Set capture brightness: (0 255)-127 val:127 hr:0x0 Hauppauge WinTV-7164 Analog Capture-1
Tue 4/13 10:21:58.642 [MainMsg@aa467] setEncodingProperties0 1256048912 MPEG2 Max Quality
Tue 4/13 10:21:58.642 [MainMsg@aa467] Set encoding property audiooutputmode to 0
Tue 4/13 10:21:58.642 [MainMsg@aa467] Set encoding property audiocrc to 0
Tue 4/13 10:21:58.642 [MainMsg@aa467] Set encoding property gopsize to 15
Tue 4/13 10:21:58.642 [MainMsg@aa467] Set encoding property videobitrate to 12000000
Tue 4/13 10:21:58.642 [MainMsg@aa467] Set encoding property inversetelecine to 0
Tue 4/13 10:21:58.642 [MainMsg@aa467] Set encoding property closedgop to 0
Tue 4/13 10:21:58.642 [MainMsg@aa467] Set encoding property vbr to 0
Tue 4/13 10:21:58.642 [MainMsg@aa467] Set encoding property outputstreamtype to 0
Tue 4/13 10:21:58.643 [MainMsg@aa467] Set encoding property width to 720
Tue 4/13 10:21:58.643 [MainMsg@aa467] Set encoding property height to 480
Tue 4/13 10:21:58.643 [MainMsg@aa467] Set encoding property audiobitrate to 384
Tue 4/13 10:21:58.643 [MainMsg@aa467] Set encoding property audiosampling to 48000
Tue 4/13 10:21:58.643 [MainMsg@aa467] Set encoding property disablefilter to 1
Tue 4/13 10:21:58.643 [MainMsg@aa467] Set encoding property medianfilter to 3
Tue 4/13 10:21:58.643 [MainMsg@aa467] Set encoding property fps to 30
Tue 4/13 10:21:58.643 [MainMsg@aa467] Set encoding property ipb to 0
Tue 4/13 10:21:58.643 [MainMsg@aa467] Set encoding property deinterlace to 0
Tue 4/13 10:21:58.643 [MainMsg@aa467] Set encoding property aspectratio to 1
Tue 4/13 10:21:58.643 [MainMsg@aa467] setupEncoding0 called for 1256048912 'Hauppauge WinTV-7164 Analog Capture-1' (ver 1.0)
Tue 4/13 10:21:58.643 [MainMsg@aa467] setupEncoding0 Trace1 
Tue 4/13 10:21:58.644 [MainMsg@aa467] setupEncoding0 Trace2 
Tue 4/13 10:21:58.644 [MainMsg@aa467] setupEncoding0 forced Encoder Hauppauge WinTV-7164 MPEG2 PS Encoder/Mux 
Tue 4/13 10:21:58.644 [MainMsg@aa467] setupEncoding0 Trace3 
Tue 4/13 10:21:58.649 [MainMsg@aa467] Using encoder filter (1)
Tue 4/13 10:21:58.649 [MainMsg@aa467] setupEncoding0 Trace4 
Tue 4/13 10:21:58.651 [MainMsg@aa467] setupEncoding0 Trace5 
Tue 4/13 10:21:58.653 [MainMsg@aa467] setupEncoding0 Trace6 
Tue 4/13 10:21:58.653 [MainMsg@aa467] is not ATI encoder.
Tue 4/13 10:21:58.653 [MainMsg@aa467] setupEncoding0 Trace6-1 
Tue 4/13 10:21:58.653 [MainMsg@aa467] configureHCWEncoder is running for 'Hauppauge WinTV-7164 Analog Capture-1'.
Tue 4/13 10:21:58.653 [MainMsg@aa467] configureHCWEncoder setup width 720 on encoder
Tue 4/13 10:21:58.658 [MainMsg@aa467] configureHCWEncoder setup width 720 succeeded
Tue 4/13 10:21:58.658 [MainMsg@aa467] configureHCWEncoder setup ouputstream 0 on encoder
Tue 4/13 10:21:58.669 [MainMsg@aa467] configureHCWEncoder setup ouputstream change 0 succeeded
Tue 4/13 10:21:58.669 [MainMsg@aa467] configureHCWEncoder setup video GOP open/close failed
Tue 4/13 10:21:58.669 [MainMsg@aa467] configureHCWEncoder setup BitRate 12000 mode:0 on HW econder
Tue 4/13 10:21:58.696 [MainMsg@aa467] configureHCWEncoder setup BitRate change failed
Tue 4/13 10:21:58.696 [MainMsg@aa467] configureHCWEncoder setup GOP size 15 on HW encoder filter
Tue 4/13 10:21:58.698 [MainMsg@aa467] configureHCWEncoder setup GOP size failed
Tue 4/13 10:21:58.698 [MainMsg@aa467] configureHCWEncoder setup inverse telecine 0 on HW encoder filter
Tue 4/13 10:21:58.701 [MainMsg@aa467] configureHCWEncoder inverse telecine succeeded
Tue 4/13 10:21:58.702 [MainMsg@aa467] configureHCWEncoder setup audio BitRate 384 on HW encoder
Tue 4/13 10:21:58.721 [MainMsg@aa467] configureHCWEncoder setup audio BitRate succeeded
Tue 4/13 10:21:58.721 [MainMsg@aa467] configureHCWEncoder audio sampling rate 48000 on HW encoder
Tue 4/13 10:21:58.723 [MainMsg@aa467] configureHCWEncoder setup audio sampling rate succeeded
Tue 4/13 10:21:58.723 [MainMsg@aa467] configureHCWEncoder setup audio channel succeeded
Tue 4/13 10:21:58.724 [MainMsg@aa467] configureHCWEncoder setup audio crc on/off succeeded
Tue 4/13 10:21:58.724 [MainMsg@aa467] configureHCWEncoder done 'Hauppauge WinTV-7164 Analog Capture-1'
Tue 4/13 10:21:58.724 [MainMsg@aa467] setupEncoding0 Trace7 
Tue 4/13 10:21:58.724 [MainMsg@aa467] setupEncoding0 Trace8 
Tue 4/13 10:21:58.728 [MainMsg@aa467] setupEncoding0 Trace9 
Tue 4/13 10:21:58.734 [MainMsg@aa467] setupEncoding0 Trace10 
Tue 4/13 10:21:58.734 [MainMsg@aa467] Encoding to file \\192.168.1.110\FREC\TheView-8415366-1.mpg
Tue 4/13 10:21:58.734 [MainMsg@aa467] setupEncoding0 Trace27 
Tue 4/13 10:21:58.735 [MainMsg@aa467] setupEncoding0 Trace28 
Tue 4/13 10:21:58.735 [MainMsg@aa467] startEncoding0 called for 'Hauppauge WinTV-7164 Analog Capture-1'
Tue 4/13 10:21:58.915 [MainMsg@aa467] GetBroadcastStandard  for device:'Hauppauge WinTV-7164 Analog Capture-1'
Tue 4/13 10:21:58.915 [Seeker@7f9d70] RootFile=\\192.168.1.110\EREC fstype=null fileLength=1451638784
Tue 4/13 10:21:58.916 [Seeker@7f9d70] SEEKER HAS DETECTED A HALT IN THE ENCODER...TRYING TO RESET IT
Tue 4/13 10:21:58.916 [Seeker@7f9d70] VF.submitJob(VFJob[InactiveFile r=0.0 t=0 file=null ifn=\\192.168.1.110\EREC\Supernatural-Skin-8414831-0.mpg])
Tue 4/13 10:21:58.916 [MainMsg@aa467] stopEncoding0 called (config:0x10800)
Tue 4/13 10:21:58.916 [MainMsg@aa467] stopEncoding0 trace 3 0x4bd120a4
*** I JUST NOTICED THAT
when a halt happens the recording is broken into mutliple files. so one of the reocrdings that was interupted in teh above minute of time there is actually 2 seperate files for it....
Last edited by PiX64; 04-13-2010 at 10:20 AM.
Reply With Quote
  #3  
Old 04-13-2010, 10:24 AM
Opus4's Avatar
Opus4 Opus4 is offline
Administrator
  
Join Date: Sep 2003
Location: NJ
Posts: 19,624
The first thing you should do when troubleshooting problems is to remove all customizations to help narrow down where the problem may be.

- Andy
__________________
SageTV Open Source v9 is available.
- Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1.
- Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus
- HD Extenders: A) FAQs B) URC MX-700 remote setup
Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request.
Reply With Quote
  #4  
Old 04-13-2010, 10:35 AM
jerryt jerryt is offline
Sage Fanatic
  
Join Date: Oct 2007
Posts: 832
Have you tried the "Delay 600" trick on the tuner which is giving you the halt warning?
Reply With Quote
  #5  
Old 04-13-2010, 10:56 AM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
  
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
I have not, nor am i familiar with it...what do I do?

Opus -

what is the best way to accomplish this. Will removing the jetty starter line from the properties and running the stock STV accomplish this?

~Pix64
Reply With Quote
  #6  
Old 04-13-2010, 11:16 AM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
  
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
Jerryt -- found the "trick" you were talking about, and ill give it a whirl...
Reply With Quote
  #7  
Old 04-13-2010, 11:56 AM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
  
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
Sadly that didn't work. I created the files -- 5 in total one for each tuner, and immedietly upon setting up 5 recordings within 5 minutes i received a HALT DETECTED..." on all 5 devices.
Reply With Quote
  #8  
Old 04-13-2010, 12:05 PM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
  
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
As a next step...not sure if this is what OPUS meant or not but i did the following:

Reverted some of the JARs back to the latest STABLE build no beta especially the sagex.api...not sure if this is used by the default stv or not, but i reverted it nontheless.

I also removed startup classes (only had jetty starting up) and I reverted the ui back to the default STV.

Will report back....

Oh and i stopped playon as well as squeezebox server..
Last edited by PiX64; 04-13-2010 at 12:07 PM.
Reply With Quote
  #9  
Old 04-13-2010, 12:22 PM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
  
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
So far so good. Been recording 5 streams at once without a hiccup or HALT. 3 HD 2 SD.

when i get to the point of adding my add-ons back in does anyone have suggestions as to the order at which i should add/update things?


Spoke to soon. almost immedietly after i posted this i checked agian and all 5 recordings "HALT DETECTED".

GRRRR!!!! any suggestions on what to do next?
Last edited by PiX64; 04-13-2010 at 12:29 PM.
Reply With Quote
  #10  
Old 04-13-2010, 12:42 PM
jerryt jerryt is offline
Sage Fanatic
  
Join Date: Oct 2007
Posts: 832
Setup to record to a different local drive as a test.
Reply With Quote
  #11  
Old 04-13-2010, 12:50 PM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
  
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
Do u mean without unc path 192.168...\record

or do u mean a physically different drive? Or both
Reply With Quote
  #12  
Old 04-13-2010, 12:56 PM
MeInMaui's Avatar
MeInMaui MeInMaui is offline
SageTVaholic
  
Join Date: Feb 2005
Location: Maui. HI
Posts: 4,203
@ PiX64

The first thing you should do is switch back to the default STV with no plugins at all (i.e a completely stock setup). If the problem occurs in this configuration then you can rule out any 3rd party add-ons/plugins and you will be able to contact official SageTV support for help.

I had a lot of problems in the past with halted recordings. They all stemmed from either poor Hauppauge HD-PVR drivers (updating to the latest version resolved this) or occasionally from my cable boxes shutting themselves off. You should check to see what tuners are giving you problems. Is it a specific tuner or is it random?

Aloha,
Mike
__________________
"Everything doesn't exist. I'm thirsty." ...later... "No, it's real!!! I'm full."
- Nikolaus (4yrs old)
Reply With Quote
  #13  
Old 04-13-2010, 01:08 PM
nyplayer nyplayer is offline
SageTVaholic
  
Join Date: Sep 2005
Posts: 4,997
PiX64,
Try recording directly to the drives without using UNC paths... Also is your switch a router and gigabit?.. What I did when I was getting problems with recordings was to move the hd homeruns clients etc... to its own switch. Then connect a router to 1 of the ports. UNC is much more slower then writing directly to the HD.
__________________
Channels DVR UBUNTU Server 2 Primes 3 Connects TVE SageTV Docker with input from Channels DVR XMLTV and M3U VIA Opendct.
Last edited by nyplayer; 04-13-2010 at 01:28 PM.
Reply With Quote
  #14  
Old 04-13-2010, 01:30 PM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
  
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
Ill try not using UNC paths.

Currently everything SAGE (3 x hd200, Sage Server, Ubuntu Storage SErver (blu-ray,DVD,Music) and HDHR) is connected directly to a 24 port gigabit switch. The switch is linked to a router.

If this does in fact fix the issue, then won't I be out of luck with commercial skip and the hd200's being able to see the comskip files?

MeiInMaui -

First of I LOVE your SageMC it is simply put AMAZING!!!!
The problem occurs actually on ALL of my devices which are setup as follows:

HDHR - 2 QAM
HVR2250 - 1 conencted for QAM 1 connected to standard def non DVR Comcast STB DCT2000 i believe
ATI USB encoder connected to Comcast PACE DC50x DTA
HVR1600 - Used solely for SlimPlayer Hardware loopback (thought to be causign problems, and was previous being used for Comcast Pace DC50x DTA capture

~Pix64
Last edited by PiX64; 04-13-2010 at 01:34 PM.
Reply With Quote
  #15  
Old 04-13-2010, 01:39 PM
jerryt jerryt is offline
Sage Fanatic
  
Join Date: Oct 2007
Posts: 832
Quote:
Originally Posted by PiX64 View Post
Do u mean without unc path 192.168...\record

or do u mean a physically different drive? Or both
Physically different (rules out; hardware, drives, etc...)
Reply With Quote
  #16  
Old 04-13-2010, 01:41 PM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
  
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
OK.

I am trying the above suggestion of not using UNC paths first, and then if that doesn't work i will try a phsycially different drive.

Forgot to state that both STB(s) are controlled via USB-UIRT
Last edited by PiX64; 04-13-2010 at 01:50 PM.
Reply With Quote
  #17  
Old 04-13-2010, 02:41 PM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
  
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
After recording about an hour of 5 simultaneous streams 3HD and 2 SD, i haven't recieved a single HALT Detected.

Not sure if this is by chance, or if the UNC paths were causing problems. So currently i have the actual drive letter mapped in sage as recordings. Reason i was using UNC paths before was so that the 1 client PC i have could see comskip files. I rarely use this so not a huge deal anymore. I will start adding things back in one at a time to see if i am still successful..

Any thoughts on why UNC paths might exhibit this kind of behavior?

~Pix64
Reply With Quote
  #18  
Old 04-13-2010, 03:41 PM
nyplayer nyplayer is offline
SageTVaholic
  
Join Date: Sep 2005
Posts: 4,997
Quote:
Originally Posted by PiX64 View Post
After recording about an hour of 5 simultaneous streams 3HD and 2 SD, i haven't recieved a single HALT Detected.

Not sure if this is by chance, or if the UNC paths were causing problems. So currently i have the actual drive letter mapped in sage as recordings. Reason i was using UNC paths before was so that the 1 client PC i have could see comskip files. I rarely use this so not a huge deal anymore. I will start adding things back in one at a time to see if i am still successful..

Any thoughts on why UNC paths might exhibit this kind of behavior?

~Pix64
I stopped using UNC paths for recording for that same reason as far as my client goes I mapped the administrative shares to the same drive letters.. I found this explanation a while back.


With the UNC name, your computer will actually query DNS for the ip of itself, unless that info is in the computers cache. Then it probably moves data to the pci bus and then to the disk controller. The extra copy time is because it thinks its moving it across a network connection so is probably buffering the sent packets.



PS I did test on a very large file and found that the UNC copy took twice as long.

copytest.bat
time /t>c:\nounc.txt
copy U:\HGWellsWaroftheWorlds-6022746-0.mpg c:\temp
time /t>>c:\nounc.txt
time /t>c:\unc.txt
copy U:\HGWellsWaroftheWorlds-6022746-0.mpg \\nyplayer\sharetest
time /t>>c:\unc.txt

\\nyplayer\sharetest is a share also on the c drive.
__________________
Channels DVR UBUNTU Server 2 Primes 3 Connects TVE SageTV Docker with input from Channels DVR XMLTV and M3U VIA Opendct.
Last edited by nyplayer; 04-13-2010 at 04:36 PM.
Reply With Quote
  #19  
Old 04-13-2010, 06:03 PM
PiX64's Avatar
PiX64 PiX64 is offline
Sage Icon
  
Join Date: Dec 2008
Location: Illinois
Posts: 1,991
Well it has been several hours and i have been recording on 5 tuners 3SD 2HD with all my plugins and webserver and such up an running, and everything has been working perfectly.

No ui lock ups, no spinning circle of death, and MOST importantly i have not a SINGLE Halt detected in recording.

Thanks so much to all of you for your help. Seems like I am good to go now.

Got a bunch of stuff recording tonight lost, and such, and will be watching simultaneously. So it will be the true test, but I suspect that everything is fixed now.

Thanks again for the great suggestions and help!

~Pix64
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Halt detected in Recording issues dvd_maniac SageTV Software 3 03-25-2010 04:32 PM
Halt Detected In Recording vrscdx Hardware Support 43 03-05-2010 09:14 AM
Halt Detected in Recording - repaired Skiier__Dude SageTV Software 40 01-04-2010 11:17 AM
HDHomeRun tuner reports Halt Detected in Recording vhurst Hardware Support 5 09-29-2009 10:49 PM
Halt detected in recording loonsailor SageTV Software 0 08-12-2009 12:14 PM


All times are GMT -6. The time now is 07:45 AM.

Contact Us - SageTV, LLC - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.