Cant get channels with 3 or 4 digits to tune

[bollockz]

Here is my setup.

SageTV, PVR-150, MCE remote/blaster using EXETuner, HIPWSend & HIP.

Got it all setup and working but if I punch in channel 180 on the remote it trys to tune to 18. It skips the 3rd (and therefor the 4th) digit

It tunes 2 digit channels fine. It also does the same if i use the channel guide to select a channel.

This has to be an easy fix but I cant figure it out. Someone pleae help

Thanks

[gplasky]

Make sure HIPSEND is configured right. That is what is blasting the digits. You may have to configure Sage for 4 digits. I think 3 is by default. It is int he detailed settings-custom I believe.

Gerry

[bollockz]

i dont see anything to configure with HipWSend. It just takes what exetuner gives it and passes it to HIP

Oh BTW, I set Sage to use 4 digits but it didnt fix the problem. It still only sends 2 digits

[bollockz]

Anyone else have any ideas?

[bollockz]

I just realized that it doesnt like the 3rd digit at all. I was using HIP to send channels and if i send 10 it turns the STB to channel 10

If i send 109 it tunes to 10
if I send 1098 it tunes to 108

Anyone have any sugestions