HVR-2200 (2250)

[moonshnr]

I am noticing the same thing. Removing the 1800 has no effect but the #2 digital tuner on the 2250 seems to be working and the #1 digital tuner is not.

[SHS]

Maybe you try getting another card just case that one is bad or call them and RMA it.

[bela41]

moonshnr,

Any luck getting this working? I'm getting the same error on either digital tuner of the 2250. I've tried the 7.6.1.27090 as well as the 27223 drivers and no dice. I'm using Sage 6.6.2 on a new install of Windows 7 x64.

[babgvant]

Originally Posted by SHS

Maybe you try getting another card just case that one is bad or call them and RMA it.

At least for me the board is fine. It worked before I put 7 on, and it works now after reverting to Vista.

[moonshnr]

Still no luck with mine. I had contacted Hauppauge support via email a week or two back and haven't heard anything out of them. I guess I will have to try rebuilding as windows XP just to see how it works for me there. I will post an update with what I find.

[SHS]

Originally Posted by babgvant

At least for me the board is fine. It worked before I put 7 on, and it works now after reverting to Vista.

Ok I see andy so it Windows 7 Thing.
Just wonder did try out the latest drivers 7.6.27.27223 (WHQL Signed)

[babgvant]

Originally Posted by SHS

Ok I see andy so it Windows 7 Thing.
Just wonder did try out the latest drivers 7.6.27.27223 (WHQL Signed)

i tried the ootb 7 drivers, those and the latest beta on your forum.

[gizmo3141]

I'm having the same issue with using more than one tuner as well. I'm going to try to use the compatability mode in windows 7 as the SageTV service would not run properly.

Installed WinTV 7 and it seems to think it only has one tuner as well!

Also, uninstall Media Center especially if you're using the mce remote as it can lock your tuners and pops up at the most inconvenient times.

Hope Hauppauge has a fix soon!

[gizmo3141]

As it turns out I now have the wintv 7 application running recording two streams at once. So it's not Hauppauges problem after all.

However, now Sage will not tune or view any live TV at all, even after uninstalling the WinTV pvr front end and uninstalling and reinstalling Sage.

Looks like it might be Sage after all...

[LehighBri]

Originally Posted by gizmo3141

As it turns out I now have the wintv 7 application running recording two streams at once. So it's not Hauppauges problem after all.

However, now Sage will not tune or view any live TV at all, even after uninstalling the WinTV pvr front end and uninstalling and reinstalling Sage.

Looks like it might be Sage after all...

I have the 2250 using the latest 27223 Hauppauge drivers in Windows 7 32-bit and it's working perfectly for me so it's definitely a configuration or driver issue on your side. What version of the drivers are you using?

Also, I posted the following on another "help me get my damn 2250 working" thread:

There are a few threads that help setting up the 2250. I personally have one and it is working perfectly. Try the tips here:

http://forums.sagetv.com/forums/show...3&postcount=64

[Qualmic]

Error (-4,0x8007001f) problem here too...glad to see I'm not alone.

I've just set up a new HTPC with Sage and an HD200 as an extender, and am getting the Capture Error (-4,0x8007001f) only on tuner #1 - even as I set it up at picking the digital tuner stage. Tuner #2 has been working perfectly for a few days now, but program conflicts are getting old fast!

Using the latest drivers for Sage and the 2250 and Win 7 64bit. Has anyone managed to find a fix for this issue? Is it a worth trying another 2250 on the chance it's a hardware problem? Is it maybe a 64bit issue?

[babgvant]

For me at least it's not a HW problem. Both tuners work fine in 7MC on the same box, I've put it in another 7 machine with the same problem, and both tuners work after reverting back to Vista.

[SHS]

Originally Posted by Qualmic

Error (-4,0x8007001f) problem here too...glad to see I'm not alone.

I've just set up a new HTPC with Sage and an HD200 as an extender, and am getting the Capture Error (-4,0x8007001f) only on tuner #1 - even as I set it up at picking the digital tuner stage. Tuner #2 has been working perfectly for a few days now, but program conflicts are getting old fast!

Using the latest drivers for Sage and the 2250 and Win 7 64bit. Has anyone managed to find a fix for this issue? Is it a worth trying another 2250 on the chance it's a hardware problem? Is it maybe a 64bit issue?

Have you tested WinTV7 ?.

[Qualmic]

I installed WinTV 7 and it only lists one tuner under devices. Interestingly I can watch/record one station on Sage, and another station on WinTV 7 simultaneously. Any ideas?

Might end up adding a 1600 for the other tuner until this gets sorted - hate spending the extra dosh for it though.

[SHS]

Originally Posted by Qualmic

I installed WinTV 7 and it only lists one tuner under devices. Interestingly I can watch/record one station on Sage, and another station on WinTV 7 simultaneously. Any ideas?

Might end up adding a 1600 for the other tuner until this gets sorted - hate spending the extra dosh for it though.

It should only show one tuner but with WinTV 7 you can do simultaneously recodering just add one to the scheduler rigth click in the video window you see the option.

[Qualmic]

Thanks for the tip re Win7 TV - it appears to record 2 channels simultaneously just fine, so that takes hardware out of the equation.

I'll try it with 32-bit Windows 7 like LehighBri when I get a chance - maybe I'll get lucky.

[benjamintm]

Not sure if this will help others, but I was receiving the Error (-4,0x8007001f) when adding the second tuner as a source on my new Windows 7 Pro 64-Bit system using the latest Hauppauge drivers (22xxdrv_27323). I found this Microsoft article which suggested running AmCap. I downloaded a version from here. Once I ran the app, I used it to access both tuners and received errors, but when I went back to SageTV I was able to add the second tuner without the error. YMMV, but it's worked between reboots.

Ben

[moonshnr]

Originally Posted by benjamintm

Not sure if this will help others, but I was receiving the Error (-4,0x8007001f) when adding the second tuner as a source on my new Windows 7 Pro 64-Bit system using the latest Hauppauge drivers (22xxdrv_27323). I found this Microsoft article which suggested running AmCap. I downloaded a version from here. Once I ran the app, I used it to access both tuners and received errors, but when I went back to SageTV I was able to add the second tuner without the error. YMMV, but it's worked between reboots.

Ben

Thanks for this info Ben. I am not sure if the AmCap app was any real help but between it, the new drivers, and a couple of reboots the problematic tuner now works. AmCap seems to only detect the analog tuners, or at least only reports two tuners, and immediately gives errors when selecting either. It does not appear that you need this running in the background after the initial attempts at setting up the tuner, but it may help to have it running as you try to set it up. I tried selecting each tuner in AmCap and then setting it up in Sage (without closing AmCap). Although it failed both times, I was able to reboot and then configure the tuner without any problems.

Assuming that it is permanently fixed, it appears to have been a Win 7 x64 issue as it worked for me and others in this thread on XP/Vista just fine. Even though it turned out to be drivers and not hardware, I never did get a response from Hauppage...

[emverham]

Originally Posted by Qualmic

Error (-4,0x8007001f) problem here too...glad to see I'm not alone.

I've just set up a new HTPC with Sage and an HD200 as an extender, and am getting the Capture Error (-4,0x8007001f) only on tuner #1 - even as I set it up at picking the digital tuner stage. Tuner #2 has been working perfectly for a few days now, but program conflicts are getting old fast!

Using the latest drivers for Sage and the 2250 and Win 7 64bit. Has anyone managed to find a fix for this issue? Is it a worth trying another 2250 on the chance it's a hardware problem? Is it maybe a 64bit issue?

I'm getting the same error... although sometimes I can add the tuner correctly... but it later crashes when SageTV tries to use the second tuner to record anything. Anyone made any progress in the last month? Or have you just turned off this tuner?

[moonshnr]

I haven't had that error since I got the new drivers and played around with AmCap