|
|
|||||||
| Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
02-04-2007, 03:30 AM
|
|||
|
|||
|
HDHomerun ATSC VHF Problem
I have Sagetv 6 and a HDHomerun, most channels work great and the signal meter on HDHomerun Manager is very high on all channels that work.
But I cant seem to get channel 3 (2.1) to work. On the channel list it doesnt' have the x-x-x numbers after the name which the HDHomerun instructions say is a sign its not going to work. When I tune the channel Sage says no signal. On AntenaWeb i looked up my location and 2.1 happens to be the only vhf digital channel in my area, and recommends a bigger antenna for that channel. Will the HDHomerun not tune this channel? Or is my antenna just not picking it up? Really sucks since the superbowl is on this channel.. Thanks 
|
|
#2
02-04-2007, 06:46 AM
|
||||
|
||||
|
By your description it sounds like you're not receiving a strong enough signal for the HD Homerun to do anything with it. If it is not seen by the HD Homeroom SageTV has nothing to work with. It sounds like you need a bigger antenna.
Gerry
__________________
Big Gerr _______ Server - WHS 2011: Sage 7.1.9 - 1 x HD Prime and 2 x HDHomeRun - Intel Atom D525 1.6 GHz, Acer Easystore, RAM 4 GB, 4 x 2TB hotswap drives, 1 x 2TB USB ext Clients: 2 x PC Clients, 1 x HD300, 2 x HD-200, 1 x HD-100 DEV Client: Win 7 Ultimate 64 bit - AMD 64 x2 6000+, Gigabyte GA-MA790GP-DS4H MB, RAM 4GB, HD OS:500GB, DATA:1 x 500GB, Pace RGN STB.
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
