DVBT No Signal on all channels with 6.0.14

[pschweig]

Hi

Has anybody got DVBT working with 6.0.14? I upgraded from 6.0.13 and now all my DVBT channels give No Signal.

I tried scanning which found most channels but still all gave no signal. Also the channel names found are all missing the first letter

ch:1 9018 4105 4169 578375 8 0 1 #BC ONE
ch:2 9018 4105 4233 578375 8 0 1 #BC TWO

I will raise this support but wondered if anybody had more luck with it than me?

[Paul365]

Yes, Using a HVR 1300 or a 3000 The same Here, Very Limited DVB-T and the first letter is missing from the channel Name AND Some of the Lines of the OTA EPG Guide.

[Mark SS]

Get the bug reports in

[Lucas]

It must be related to your specific card.

I have no problems with 2 TT 1300 DVB-T cards.

Granted I use a hand built .freq file and use XMLTV for EPG data so my use is not typical.

[jamjam]

Originally Posted by pschweig

Hi

Has anybody got DVBT working with 6.0.14? I upgraded from 6.0.13 and now all my DVBT channels give No Signal.

I tried scanning which found most channels but still all gave no signal. Also the channel names found are all missing the first letter



I will raise this support but wondered if anybody had more luck with it than me?

this is the same problem as i am having

will submit a bug report note

[Paul365]

Also when I use the HVR-3000 the "Select the input" Section doesn't list the satellite option, only the 2 composites, the 2 S-videos, the TV Tuner and the Digital TV Tuner

[i0zjh02]

I have same issue with 6.0.14 and twin HVR1300's using manual frq files, i have tried a complete fresh install (in case it was an issue installing over 6.0.13) and still the same. Have reinstalled 6.0.13 over the top and all channels are now back so definately looks like a bug in this specific beta release

[pschweig]

Originally Posted by Lucas

It must be related to your specific card.

I have no problems with 2 TT 1300 DVB-T cards.

Granted I use a hand built .freq file and use XMLTV for EPG data so my use is not typical.

Might be related to the card as I am using XMLTV and a manual .frq too so it can't be that.

I have submitted a bug report. Hopefully they will be able to spot the problem from the logs straight away

[Paul365]

Ive tried it both with new install and no xmltv and with manual .frq and xmltv, both fail in the same way, infact it appears to ignore the xmltv info completely.

Also submited a bug report

[Mark SS]

Just installed the latest beta to test and noticed the same issue with channel names using a DVB-S card.

[donkey]

"First letter eaten" bug or channel name bug is fixed in
http://download.sage.tv/users/qian/TSSplitter.ax
a multiple Cinergy card bug is fixed in
http://download.sage.tv/users/qian/DSShowCapture.dll

I need raw data to reproduce "No signal" problem for fixing

[Paul365]

Using Both of the fixes provided above has fixed all my issues except the Satellite related stuff, which is not relevent in this thread.

Thanks Qian

[Armandou]

Originally Posted by Paul365

Yes, Using a HVR 1300 or a 3000 The same Here, Very Limited DVB-T and the first letter is missing from the channel Name AND Some of the Lines of the OTA EPG Guide.

Hi,
I wonder how you can use the HVR-3000 (I guess the Hauppauge card).
I'm trying SageTV and I do not find the available drivers even if I use all the last revisons ...
Moreover the card is not listed on the SageTv site so of course the software do not detect the hardware, just it mentions the video input.
Thx by advance for your answers.