6.0.13 and Tuning Digital/Analog Channels

[trini0]

I had a problem with tuning channels documented in this thread ->
http://forums.sagetv.com/forums/showthread.php?t=19673

I got the beta installed before I left for work this morning.
In the short time while I was playing with it, here is what Im seeing ->

1. If I tune to digital 7.1, the USB-UIRT fires off, and Sage tunes to analog 7
2. If I tune to digital 7.2, the USB-UIRT does not fire, and Sage tunes to the correct digital station.

This happened to most of the channels I tried.
I'll try again when I get home this evening, along with getting a log dump of this oddity.

Is anyone having any problems changing channels?
Thanks

[trini0]

In addition to what I described above, it is also displaying the problem
that I linked to in the previous post.
I tried tuning to digital 6.1, and I end up on analog 88xx
Debug log sent to sage.
Im too frustrated. Going to rebuild the box from scratch...

[trini0]

I've been back and forth with Sage tech support concerning my channel changing issue.
The last email from tech support ->

I've verified that you have the digital channel enabled in both lineups.
Please disable it from the DISH lineup and it will fix this problem.

If Im understanding them correctly, it seems that I have a digital channel
enabled in my analog lineup.
Im not sure what is meant by that and how to disable, as I can swear
that my digital and analog lineups are unique.
Could someone please enlighten me on what I should be doing...

If this is off-topic for this forum, please redirect.
Thanks

[Narflex]

Go to Setup->Setup Video Sources....then select your source and then select Channel Setup. That's where you enable/disable channels.

[trini0]

Now that I've gotten home, I checked, and yes the digital channels are enabled
in my analog lineup. (Never noticed that before).
Going to disable and give it a try again.

[trini0]

Originally Posted by Narflex

Go to Setup->Setup Video Sources....then select your source and then select Channel Setup. That's where you enable/disable channels.

I just figured it out.
I didn't know that the analog lineup contained digital listings...
Thanks

[jamesnw]

I have been noticing oddities with my digital channels as well. I am 100% sure that I have separate analog and digital EPGs on my DualTV and Vbox DTA-150 cards. There is a strange issue on the Vbox where sometimes the sub-channels seem to be swapped. If I tune to 2-1 for example, I will see the output for 2-2. One time I even had the 2-2 station being played when I changed to 2-1 OR 2-2. I'm not really sure what is going on here but I have been working on a separate issue so I haven't been able to debug it yet.