|
|
|||||||
| SageTV Beta Test Software Discussion related to BETA Releases of the SageTV application produced by SageTV. Questions, issues, problems, suggestions, etc. regarding SageTV Beta Releases should be posted here. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
11-07-2006, 10:33 AM
|
||||
|
||||
|
MVP Double-Image
Anyone seen an issue with the MVP where occasionally on startup you see a double-image? This is basically when the Sage menu comes up, there's the menu there with a second image overlaid a little below the first, so everything is duplicated. Hard to explain, but if you've seen it you'll know...
 Reckon it's a Hauppauge problem or a Sage one? Next time it happens and I'm home I'll take a photo.
__________________
unRAID Server: Intel Core i5 7600K, 48GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x10TB SATA3 Parity Drive, 3x8TB SATA Array, 1x hdHomeRun DVB-T2 Quattro, IPTV via xTeVe, unRAID 6.8.3, tvHeadEnd for recording back end, Emby Clients: 3 Nvidia Shields, 3 FireTV, 3 Win10 Pro PC Clients 
|
|
#3
11-07-2006, 10:56 AM
|
||||
|
||||
|
SCART (which won't mean a lot to you unless you're in Europe...). Thing is, I'm sure it's not cabling because it's only probably every 20th startup, and not when the MVPs have been moved; and also, it happens on both MVPs with different TVs...
__________________
unRAID Server: Intel Core i5 7600K, 48GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x10TB SATA3 Parity Drive, 3x8TB SATA Array, 1x hdHomeRun DVB-T2 Quattro, IPTV via xTeVe, unRAID 6.8.3, tvHeadEnd for recording back end, Emby Clients: 3 Nvidia Shields, 3 FireTV, 3 Win10 Pro PC Clients
|
|
#4
11-07-2006, 12:17 PM
|
|||
|
|||
|
I have seen this, too. But only since I update to 6 Beta so I don't think it's a cabling issue.
I can usually fix it by just switching the MVP off and on again. And like rickgillyon said it's only happening once in a blue moon so I didn't really pay much attention to this 'problem' BTW My MVP is PAL, too. SO maybe it's an issue with the PAL implementation in Sage 6
|
|
#5
11-07-2006, 01:06 PM
|
|||
|
|||
|
Same thing happened to me yesterday after switching the MVP off-on. Tried to restart the MVP several times with the on/off button but this did not help. Finally I unplugged the power, this did solve the problem. Never seen this behavior before.
I have a PAL MVP connected by SCART, SageTV 6.0.13 (not running in service mode).
__________________
Server: SageTV on WHS, 10,2 TB pooled + 1 TB for recordings, 2x FloppyDTV T/CI with Technicrypt CXV CAM for DVB-T, NOVA HD S2 for FTA (mainly German) DVB-S Clients: 2x HD200 + Wired HauppaugeMVP, SageTV Client on PC + Placeshifter on laptops
|
|
#6
11-07-2006, 01:43 PM
|
|||
|
|||
|
same here. saw it once, several restarts did not help, until cable was removed and image was renewed.
__________________
Server: AMD Phenomen IIX4 965 Black Edition, 4 GB, 2x Hauppauge HVR-3000, 2x PCTV DiB BDA - native, Terratec S7, Cine S2 (Dual DVBS2), WinTV-Nova usb via DVBLogic, xmltv, 20TB disk arrays Clients: 3 x MediaMVP, 2 x HD-300, 4 x SageTV Client
|
|
#7
11-07-2006, 02:35 PM
|
||||
|
||||
|
Just had a very swift reply from support. This has been seen, rarely, on both PAL and NTSC MVPs. Happens also with the Hauppauge MVP image, so it's a hardware issue rather than a Sage issue. Probably worth checking with Hauppauge support, when I have the time...
__________________
unRAID Server: Intel Core i5 7600K, 48GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x10TB SATA3 Parity Drive, 3x8TB SATA Array, 1x hdHomeRun DVB-T2 Quattro, IPTV via xTeVe, unRAID 6.8.3, tvHeadEnd for recording back end, Emby Clients: 3 Nvidia Shields, 3 FireTV, 3 Win10 Pro PC Clients
|
|
#8
11-07-2006, 02:49 PM
|
||||
|
||||
|
Quote:
PS.. I use the NTSC version of the MVP.. both wired and wireless
|
|
#9
11-07-2006, 02:59 PM
|
||||
|
||||
|
My problem doesn't show the boot screen and the UI, just two versions of the UI.
__________________
unRAID Server: Intel Core i5 7600K, 48GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x10TB SATA3 Parity Drive, 3x8TB SATA Array, 1x hdHomeRun DVB-T2 Quattro, IPTV via xTeVe, unRAID 6.8.3, tvHeadEnd for recording back end, Emby Clients: 3 Nvidia Shields, 3 FireTV, 3 Win10 Pro PC Clients
|
|
#10
11-07-2006, 04:45 PM
|
|||
|
|||
|
I see it too and it started with ver 6. Not a big problem though but for sure a Sage one.
rtengvad
__________________
Server: Win7 • SageTV v7.1.9 • GA-MA785GM-US2H • Athlon 64 X2 BE-2350 • 2 Gb RAM • 4x 1Tb WD RE-2 GP in RAID5, Adaptec 5405 Raid controller • 2x firewire DVB-C FloppyDTV C/CI, 1x TechnoTrend CT-3650 CI via the LM Smart DVB Recorder plug-in. Clients: HD300 to a Samsung PS50C7705 (PN50C8000) via a DVDO Edge • HD200 • Placeshifter Remote: Universal Remote Control MX-980
|
|
#11
11-07-2006, 04:48 PM
|
||||
|
||||
|
Support say they saw it on Hauppauge's bootloader too, so not a Sage problem. I have no reason to doubt them.
__________________
unRAID Server: Intel Core i5 7600K, 48GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x10TB SATA3 Parity Drive, 3x8TB SATA Array, 1x hdHomeRun DVB-T2 Quattro, IPTV via xTeVe, unRAID 6.8.3, tvHeadEnd for recording back end, Emby Clients: 3 Nvidia Shields, 3 FireTV, 3 Win10 Pro PC Clients
|
|
#12
11-07-2006, 05:12 PM
|
|||
|
|||
|
Hmm, I've never seen it on my Hauppauge bootloader. And why are we all seeing it now with ver 6 and not berfore? Well in any case I don't think it is a big problem - I'm used to "pull the plug" - but for new costumers it might be.
rtengvad
__________________
Server: Win7 • SageTV v7.1.9 • GA-MA785GM-US2H • Athlon 64 X2 BE-2350 • 2 Gb RAM • 4x 1Tb WD RE-2 GP in RAID5, Adaptec 5405 Raid controller • 2x firewire DVB-C FloppyDTV C/CI, 1x TechnoTrend CT-3650 CI via the LM Smart DVB Recorder plug-in. Clients: HD300 to a Samsung PS50C7705 (PN50C8000) via a DVDO Edge • HD200 • Placeshifter Remote: Universal Remote Control MX-980
|
|
#13
11-07-2006, 05:19 PM
|
||||
|
||||
|
If you think it's not a hardware issue and is a Sage v6 problem, you should report it. I've only used the MVP in v6, so don't have the perspective you may have. I can assure you, if it's not reported as a bug, it won't be investigated.
__________________
unRAID Server: Intel Core i5 7600K, 48GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x10TB SATA3 Parity Drive, 3x8TB SATA Array, 1x hdHomeRun DVB-T2 Quattro, IPTV via xTeVe, unRAID 6.8.3, tvHeadEnd for recording back end, Emby Clients: 3 Nvidia Shields, 3 FireTV, 3 Win10 Pro PC Clients
|
|
#14
11-09-2006, 01:27 PM
|
||||
|
||||
|
I've seen the same problem at about the same frequency. I highly doubt it's a cabling issue either. This is on my iTreadmill and the cables are tied tight. I've never seen the issue on the Hauppauge software, but then again, it doesn't happen often and I don't use the Hauppauge software often so my limited statistics ability says I'm not likely to see it in native Hauppage software just by the odds.
My fix was the same as everyone elses, ... pull the power plug, count to 5, plug in, fixed.
__________________
Server: WinXPProSP2, Athlon64 4000+ Dual Core, ASUS NVidia Premium SLI MB, 2Gig DDR, 2xGeForce 7800GTX in SLI, 2x250G SATA HD's in RAID stripe, 250G SATA Video, 250G Backup HD, Onboard Realtek sound, PureVid 1.0.2.223, SageTV 6.3.8 HTPC: WinXPProSP2, AthlonXP 1700+, 1GigDDR, ATI Radeon 2400HD AGP with , Overlay, SageTV 6.3.8 iTreadmill: Media MVP with USRobotics wireless bridge.
|
|
#15
11-09-2006, 03:08 PM
|
||||
|
||||
|
And another one (me) reporting the same issue, never had it before - first time I saw it was after this beta.
And no, not a major issue - reboot does the trick.
__________________
If we knew what we were doing, it wouldn't be called research, would it? Albert Einstein (1879-1955)
|
|
#16
11-09-2006, 03:39 PM
|
|||
|
|||
|
Rick I think you put the kiss of death on this.
Never had this problem before. Then when I was watching a Dvix file it froze and when I tried to reboot via the romote this happend. Only ever seen this happen once. Had to unplug the unit. I only had to unplug the MVP twice sence ver 6. Had to do this daily in ver 5 Dean
|
|
#17
11-09-2006, 04:12 PM
|
||||
|
||||
|
Quote:
 Not my fault, honest!
__________________
unRAID Server: Intel Core i5 7600K, 48GB DDR4, 2x512GB PCIe M.2 Cache Pool, 2x10TB SATA3 Parity Drive, 3x8TB SATA Array, 1x hdHomeRun DVB-T2 Quattro, IPTV via xTeVe, unRAID 6.8.3, tvHeadEnd for recording back end, Emby Clients: 3 Nvidia Shields, 3 FireTV, 3 Win10 Pro PC Clients
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
