2nd pvr 150 problem

[banmj]

I installed a 2nd pvr150 card. everything is working good except for one channel on the new card. The audio is breaking up. The first card is using svideo from the cable box. The second card uses the coax without the cable box. The coax works fine going straight through to the tv. Anyone have any ideas what the problem could be.
Thanks

[orangezero]

i would make sure all the connections are properly connected first, which i'm sure you have done.

also, check on another tv to make sure its not a station issue, sure you've done this, too, or it seems like it sounds fine from the other card.

I can say this, with sage, most problems i have are fixed by starting over, either installing the software again, or installing the drivers again. I would definitely start with the drivers, and then try to have sage accept it into the program and configure it again.

another option, if it is picked up by the other card, and you dont' think you'll ever record on it that often, turn the channel off on that card, then it will always record on the other card and you won't have a problem.

may not be much help, but i noticed no one else has responded yet.

good luck