Channel Missing in guide

[technazz]

I have Sage 4.0 and have trouble with a EPG lineup. When I setup the tuner Channel 26 (TLC) it's in the Channels setup and enabled. When I go to the guide it is the only channel not there, even though it is enabled in the channel setup


Anybody Else see this before?

Technazz

[Opus4]

Do you have multiple lineups in use, for multiple sources? If so & that channel is also on the other lineup, it is probably getting combined with the same channel on the other lineup.

- Andy

[dbfresh23]

I've been having the same issue. I'm missing 4,5,7,9,11 even though they are all listed in the setup and enabled - they are no longer showing in the guide.

Only a single source and a single tuner is configured.

[technazz]

Do you have multiple lineups in use, for multiple sources? If so & that channel is also on the other lineup, it is probably getting combined with the same channel on the other lineup.

- Andy

I have 2 Tuner One PVR-250 hooked up to cable and a Twinhan 102G DVB-S card via Network encoder hooked up to Dishnetwork.

If it is getting combined, this is the only channel that is combined. I have around 25 other channels that are the same name on both tuners. If Sage usually combines them why doesnt it combine the other 25?

I had this working fine for almost 2 months with NO channels combined.

technazz

[gabrielcab]

im havin the exact problem... im missin channels 4,5, ... and others... and channel 2 appears on the configuration menu but when i use the program guide it dosnt appears.... im using a DISH network lineup...

[SHS]

Ok boys and girls when come dishnetwork the main problem is multiple channel some time there can be as min as 3 channel that are the same channel name, Get some paper wirte down the channel number that you see in on Dish Receiver EPG lineup that are not mark as green or red or the channel you want.
Go to Mian Menu down to Setup | Setup Video Sources | Your PVR card that Listed | Channel Setup then Disable All Channel, then go thur the list of channel and maunel enable one at time.
But beware that Local channel are map from 6200 though 9399 to reg Antenna Channel Number in your area make it eazy for people to punch in the number and you should be ware that if you have HDTV Receiver you not use Local channel number you should used from 6200 though 9399 only which not map in same way as SD Receiver.