|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
sage2.28 USBURIT
Hey guys.
Just did a reinstall and setting up ny new (zoned) USBUIRT. I'm having problems at the setup wizard trying to select external tuning. When it gets to "what to tune with" I select USB-UIRT Transceiver but it won't advance. I have the dlls in place as before, in the Common folder. Also I'm using the latest USB-UIRT driver. I know I'm missing something simple here - can someone light the bulb for me ? Thx Davey Last edited by davey_fl; 05-24-2005 at 07:47 PM. |
#2
|
||||
|
||||
Are you using SageTV's service mode? If so, try setting it up w/o the service enabled. I seem to recall some posts about using the USB-UIRT + the service, but can't remember the details. A quick search found this thread, but I thought there were some other comments on it too.
- Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request. |
#3
|
|||
|
|||
Thanks Opus. I got that working by reverting back to the original STV. For some strange reason it wouldn't work under the Mlbdude stv. However, I ran into a bigger problem. the wonderful sageException (4,0,0) failed to render video error. I have tried everything to get it working, switched decoders, default, overlay, VMR9, changed video drivers (I'm using an ATI 9600 PRO with the DVI dongle out) - same error everytime. There's obviously a problem with the newer version of sage. I've had to drop back to version 2.019 to get it to work. Guess I'll never be upgrading
davey |
#4
|
||||
|
||||
I'm not familiar with that error. But, what version of DirectX is installed? You might need the latest one... unless you already did that too.
- Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request. |
#5
|
|||
|
|||
Hi Opus,
the exact error is: There was a Playback Error in playback. Details: sage.PlaybackException: ERROR (-4,0x0): There was a problem rendering the video portion of the content for playback. I have DX9.0c installed. Not sure where to go from here in terms of troubleshooting. I would love to get a later version running. davey |
#6
|
||||
|
||||
You might want to send a note to tech support to see what the "0x0" error means. Normally, there is a longer number than that, but I seem to reall others posting an error like that.
What tuner are you using? Also -- in all the things you listed above that you tried, did you try disabling 3D Acceleration in Detailed Setup -> Advanced? - Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request. |
#7
|
|||
|
|||
thx for the reply. I'll submit it and see if I can get some help. I did try it with 3D enabled and disabled, as well as turning off overlay color keying - still doesn't work, I'm using pvr-250s....
davey |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|