|
|
|||||||
| Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
05-05-2005, 01:04 PM
|
|||
|
|||
|
Happauge recoding levels
I have a Sage system with two Happauge cards, a 350 and a 150. The recorded files from the 150 have a much higher audio output level, enough that I can hear clipping in the output files. How can I adjust the audio output levels SEPERATELY, for each card? The input source is the same for both cards, analog cable via a splitter.
Thanks, and I love my SageTV setup! For those interested, I use VideoReDo as the MPEG editor and TMPEnc DVD Author to produce DVD's of my recordings. Scott 
|
|
#2
05-05-2005, 01:48 PM
|
||||
|
||||
|
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request.
|
|
#3
05-05-2005, 02:22 PM
|
||||
|
||||
|
I've tried this utility, and it does not work on RCA inputs. I wish it did, cause it is really annoying to adjust the slider and see that it made no change.
__________________
Mike Janer SageTV HD300 Extender X2 Sage Server: AMD X4 620,2048MB RAM,SageTV 7.x ,2X HDHR Primes, 2x HDHomerun(original). 80GB OS Drive, Video Drives: Local 2TB Drive GB RAID5
|
|
#4
05-05-2005, 03:10 PM
|
||||
|
||||
|
That utility looks good. I hadn't seen it until now.
Does anyone know if you can adjust the PVR-350 output volume separate from the tuner recording level? The utility doesn't have a setting for the 350 output. I looked into this a while back but didn't find anyone had had been able to do this. When they changed the recording level, it would change the output level too. Last edited by zz5; 05-05-2005 at 03:12 PM.
|
|
#6
05-06-2005, 03:39 AM
|
|||
|
|||
|
The tweak can adjust the rca input level as well (volume line in)
But.... - as SHS allready mentioned you might need to reboot. - It wont work with older drivers (only 23053 and some newer) - Hauppauge is still strugling with the audio, the latest prerelease drivers have shown several different default settings, but the havent improved things for everyone. - It seems that 23074 are the last drivers where the sound can be easily set-up just as you want, (the newer ones have major sound problems, see SHSPVR forum for more info).
__________________
"All that we see or seem, is but a dream within a dream" E.A.Poe
|
|
#7
05-06-2005, 04:47 AM
|
||||
|
||||
|
What is hooked up to the 150? Is it a cable/sat box? If so, can't you lower the volume on the box itself?
__________________
If this doesn't work right, Then: "I'm going to blow up the Earth!"
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
