|
|
|||||||
| Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
03-30-2005, 05:16 PM
|
|||
|
|||
|
Multiple Input Sources
Sorry I currently have a TiVo and I am trying to emulate some of its features.
I live in an appartment complex and receive local chanels free over a coas cable. And I pay for DirecTv WITHOUT local channels to save some cash. On a normal TV this meant changing Video Input to switch between DirecTv and local channels. TiVo has a feature that allowed me to Map the channels in sequence so that I never had to worry whether it was local or satelite. Does SageTV have this feature. Can I tell it to use the video input for satellite channels 100 and above and use the coax input for local over the air broadcasts 100 and below, thru the same tuner card? Thanks Kevin 
|
|
#2
03-30-2005, 05:44 PM
|
||||
|
||||
|
Configure 2 sources from the same tuner -- one for the tuner input & one for the svideo input. They will have different providers (DirecTV + cable), but since they are both going through the smae physical tuner, make sure they don't share any channels in Channel Setup, at the end of the source config process.
- Andy
__________________
SageTV Open Source v9 is available. - Read the SageTV FAQ. Older PDF User's Guides mostly still apply: SageTV V7.0 & SageTV Studio v7.1. - Hauppauge remote help: 1) Basics/Extending it 2) Replace it 3) Use it w/o needing focus - HD Extenders: A) FAQs B) URC MX-700 remote setup Note: This is a users' forum; see the Rules. For official tech support fill out a Support Request.
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
