![]() |
|
Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here. |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
#41
|
|||
|
|||
It's working !
I've added support for the WinTV-quadHD tuner in Sage 9 (Windows).
Sage sees this card as 4 tuners: Hauppauge WinTV 885 TS Capture Hauppauge WinTV 885 TS Capture #2 Hauppauge WinTV 885 TS Capture 2 Hauppauge WinTV 885 TS Capture 2 #2 It's been running for over a week with ATSC (OTA) input. I don't have the ability to test ClearQAM here. Multiple cards should work ok, but lack of a 2nd card has limited my testing. Update: the v9.1.6.47 (and later) Windows installer contains the fixes for this board.
__________________
System #1: Win7-64, I7-920, 8 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HDHR-US (1st gen white) tuners. HD-200. System #2: Win7-64, I7-920, 8 GB mem, 4TB HD. Java 1.8.0_131. Sage v9.1.6.747. ClearQAM: 2x HDHR3-US tuners. HD-200. System #3: Win7-64, I7-920, 12 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HVR2250; Spectrum Cable via HDPVR & USB-UIRT. 3x HD-200. Last edited by JustFred; 08-11-2017 at 11:59 AM. Reason: v9.1.6.747 installer contains fixed code |
#42
|
||||
|
||||
Quote:
![]()
__________________
SageTV v9 Server: ASRock Z97 Extreme4, Intel i7-4790K @ 4.4Ghz, 32GB RAM, 6x 3TB 7200rpm HD, 2x 5TB 7200rpm HD, 2x 6TB 7200rpm HD, 4x 256GB SSD, 4x 500GB SSD, unRAID Pro 6.7.2 (Dual Parity + SSD Cache). Capture: 1x Ceton InfiniTV 4 (ClearQAM), 2x Ceton InfiniTV 6, 1x BM1000-HDMI, 1x BM3500-HDMI. Clients: 1x HD300 (Living Room), 1x HD200 (Master Bedroom). Software: OpenDCT :: WMC Live TV Tuner :: Schedules Direct EPG |
#43
|
||||
|
||||
I'm interested
![]()
__________________
Windows 10 X64 ASUS Z270 TUF2 MOBO Intel I5 Kaby Lake @3.3 Corsair H65 AIO water cooler 16GB GSkill DRR4 10 SATA hotswap bays in 4U RM case Redundant power supply, dual UPS's, etc Samsung EVO 850 SSD X2 OS drives WD 4TB Purple drive for recordings, various other drives for archives Tuners are a work in progress |
#44
|
|||
|
|||
Sage is able to handle multiple Quads in the same system. I have no idea whether there will be PCIe h/w (bandwidth) limitations for any particular MoBo.
__________________
System #1: Win7-64, I7-920, 8 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HDHR-US (1st gen white) tuners. HD-200. System #2: Win7-64, I7-920, 8 GB mem, 4TB HD. Java 1.8.0_131. Sage v9.1.6.747. ClearQAM: 2x HDHR3-US tuners. HD-200. System #3: Win7-64, I7-920, 12 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HVR2250; Spectrum Cable via HDPVR & USB-UIRT. 3x HD-200. Last edited by JustFred; 08-11-2017 at 11:56 AM. Reason: removed zip attachments, since V9.1.6.747 installer is newer |
#45
|
|||
|
|||
Any thoughts if this will solve similar problem using WinTV-dualHD only seeing one tuner?
__________________
HTPC: Gigabyte GA-Z170XP-SLI, I7-6700, 16GB, Windows 10 Pro x64, Hauppauge HVR-1600, WinTV-dualHD, Colossus 2, Samsung 850 EVO 120GB, Seagate 3TB, WD 3TB, 3TB, 5TB, Java v1.8.0_231, SageTVx64 v9.2.1.826, Samsung UN60EH6003F, Dish ViP222K, ViewHD 1x2 HDMI Splitter. |
#46
|
|||
|
|||
Quote:
Now that I have a much better understanding of the code in this area, I might look into a similar fix... **if** I had a dual or access to a system with one. My purchase of the quad was done in a weak moment, primarily for the challenge of digging into the code. It's unlikely that I'll pony up more $$ for a usb gadget (I'm not fond of high-bandwidth usb stuff).
__________________
System #1: Win7-64, I7-920, 8 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HDHR-US (1st gen white) tuners. HD-200. System #2: Win7-64, I7-920, 8 GB mem, 4TB HD. Java 1.8.0_131. Sage v9.1.6.747. ClearQAM: 2x HDHR3-US tuners. HD-200. System #3: Win7-64, I7-920, 12 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HVR2250; Spectrum Cable via HDPVR & USB-UIRT. 3x HD-200. Last edited by JustFred; 06-24-2017 at 07:35 PM. |
#47
|
|||
|
|||
I'd be willing to test when and if the urge overcomes you.
__________________
HTPC: Gigabyte GA-Z170XP-SLI, I7-6700, 16GB, Windows 10 Pro x64, Hauppauge HVR-1600, WinTV-dualHD, Colossus 2, Samsung 850 EVO 120GB, Seagate 3TB, WD 3TB, 3TB, 5TB, Java v1.8.0_231, SageTVx64 v9.2.1.826, Samsung UN60EH6003F, Dish ViP222K, ViewHD 1x2 HDMI Splitter. |
#48
|
||||
|
||||
Quote:
|
#49
|
||||
|
||||
OK, I just ordered 2 of these, i'll let you guys know how it works out when I get them. Now if i can get 3 2250's to coexist, ill have 8 ATSC OTA tuners, and 6 NTSC SD cable tuners
![]()
__________________
Windows 10 X64 ASUS Z270 TUF2 MOBO Intel I5 Kaby Lake @3.3 Corsair H65 AIO water cooler 16GB GSkill DRR4 10 SATA hotswap bays in 4U RM case Redundant power supply, dual UPS's, etc Samsung EVO 850 SSD X2 OS drives WD 4TB Purple drive for recordings, various other drives for archives Tuners are a work in progress |
#50
|
|||
|
|||
Quote:
I also will keep an eye out for your fix of the DualHD tuner as well since I have that too but if this works, I may find myself ordering another QuadHD tuner instead since I have room for it ![]() I am testing this new file with the DualHD tuner I own JustFred and it may be working great with that tuner as well. I removed all my tuners after using your directions and only setup my sage tv setup to use the DualHD tuner and see thumbnails for each channel I am recording using both tuners so it seems to work with the DualHD tuners as well for me but wont know how well until 7 pm EST when the 2 shows end and I can watch them ![]() Yep I tried playing them both before the recordings ended since I stopped my services and started it back up again and that fix of your's seems to fix the DualHD tuners as well to get full use out of them. They show up as Hauppauge WinTV -7164 Analog Capture Digital TV Tuner and Hauppauge WinTV -7164 Analog Capture #2 Digital TV Tuner for me Now to add my QuadHD tuner in the mix and max out my tuners and fully use them. Last edited by trallyus; 06-26-2017 at 04:51 PM. |
#51
|
|||
|
|||
Quote:
On the other hand, the Hauppauge 2250 dual tuner PCIe board reports itself as "WinTV-7164 Analog Capture Digital TV Tuner", and has been supported in Sage for a very long time. Is a 2250 (or 2255) installed in your system?
__________________
System #1: Win7-64, I7-920, 8 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HDHR-US (1st gen white) tuners. HD-200. System #2: Win7-64, I7-920, 8 GB mem, 4TB HD. Java 1.8.0_131. Sage v9.1.6.747. ClearQAM: 2x HDHR3-US tuners. HD-200. System #3: Win7-64, I7-920, 12 GB mem, 4TB HD. Java-64 1.8.0_141. Sage-64 v9.2.1 ATSC: 2x HVR2250; Spectrum Cable via HDPVR & USB-UIRT. 3x HD-200. |
#52
|
|||
|
|||
Quote:
I have a 2255 I think from before and never put it in my new setup but could pop it in but it may take a day or so due to my sage tv recording stuff and me not wanting to change stuff at the moment. Before your changes my DualHD tuner only showed up if I remember right as a single tuner as I was always complaining about both of those only getting 1/2 the tuners out of 6 showing up and only 3 tuners would work. |
#53
|
|||
|
|||
The DualHD tuner shows up like the 2255 tuners when you install them but due to that bug you fixed it does not allow you to make use of the second tuner in it and only showed up for me as one tuner in the past if I remember right. You can google DualHD and my nick here as I mentioned it before I believe when I asked if anyone was working on a fix.
Yep it was posted by me and someone else here that the DualHD problem was the same problems of using half the tuner like the QuadHD tuners https://forums.sagetv.com/forums/sho...ghlight=tuners Last edited by trallyus; 06-26-2017 at 07:01 PM. |
#54
|
||||
|
||||
I recall that the Hauppauge WinTV-dualHD should show as Hauppauge WinTV-dualHD TS Capture but sagetv didn't see Hauppauge WinTV-dualHD TS Capture 2 just so you know trallyus.
|
#55
|
|||
|
|||
I just tried the replacement dll for my dualHD and it did NOT show two tuners. I did not remove the existing tuner though. May try tomorrow removing the existing tuner like trallyus said and try again.
__________________
HTPC: Gigabyte GA-Z170XP-SLI, I7-6700, 16GB, Windows 10 Pro x64, Hauppauge HVR-1600, WinTV-dualHD, Colossus 2, Samsung 850 EVO 120GB, Seagate 3TB, WD 3TB, 3TB, 5TB, Java v1.8.0_231, SageTVx64 v9.2.1.826, Samsung UN60EH6003F, Dish ViP222K, ViewHD 1x2 HDMI Splitter. Last edited by Denali; 06-26-2017 at 07:58 PM. |
#56
|
|||
|
|||
Quote:
The DLL only works with Windows I believe Denali as I am using Windows 10 64 bit and had it show up like I said with Sage TV version 9 the latest version so make sure you are using Sage 9 and not 7 and try selecting the tuners and make sure you are using windows Last edited by trallyus; 06-26-2017 at 08:14 PM. |
#57
|
|||
|
|||
I'm using SageTV ver 9 under Win10Pro x64.
Edit: Tried removing existing tuner and re adding the dualHD with the same results, only one tuner available.
__________________
HTPC: Gigabyte GA-Z170XP-SLI, I7-6700, 16GB, Windows 10 Pro x64, Hauppauge HVR-1600, WinTV-dualHD, Colossus 2, Samsung 850 EVO 120GB, Seagate 3TB, WD 3TB, 3TB, 5TB, Java v1.8.0_231, SageTVx64 v9.2.1.826, Samsung UN60EH6003F, Dish ViP222K, ViewHD 1x2 HDMI Splitter. Last edited by Denali; 06-26-2017 at 08:27 PM. |
#58
|
|||
|
|||
I am using plain vanilla SageTV with my new setup Denali as I bought a new computer and decided to see what new users would go through with sagetv 9 open source without having sagetv , so I never installed sagetv 7 first on the new computer.
Instead I downloaded sagetv 9 and did a fresh install and set it up that way so maybe that is why my tuners worked that way while your's show up as WinTV-dualHD TS Capture instead as I only have the DualHD and the QuadHD in my new computer and the quad tuner showed up as 6 tuners for me instead of 4 but I use the DTV part of the tuners instead of analog so I know to look for TS on the right tuners and the other 2 tuners I can only assume were the analog part of the tv tuners in the quad tuner. I uploaded 2 pics showing what I see - Tuners.jpg show tuners 3 and 4 added to my setup as the QuadHD tuner as the tuner 1 and 2 of the QuadHD tuners are above the tuners showing up and I have no idea how to get them all to show up at once. The other 2 tuners on the list with the number 7164 is how SageTV vanilla without going the upgrade route shows my DualHD tuner after I set it up. Selections.jpg shows all the tuners to choose from and as you can see the Quad Tuner digital part of the tuner has the letters TS for some reason so I know to use that for digital part of the tuner and I am guessing the two other tuners with the name video capture and the number 885 are the analog part of the tuners that could maybe be used for analog tuning like the old tuners I used to use. The other tuner on the list is the 7164 and is actually the DualHD tuner. Hope the photo helps what I see with a brand new setup and new tuners without installing my registered copy of sagetv 7 and using the upgrade route like most do. |
#59
|
|||
|
|||
did you do the following when you installed the new file denali
To use: 1) Stop the SageTv service 2) Make a backup of Sage.properties and the current DShowCapture.dll (both in SageTv/SageTv). 3) Replace the original DShowCapture.dll with the new unzipped file. 4) Restart the SageTv service and (assuming you've already got the Quad's drivers installed) Sage should now show 4 tuners for each Quad card. After doing all that , I removed the old tuners - and did a scan for new channels on my first tuner. Then I installed the rest of the tuners 1 by one until I had all 5 extra added and used the same lineups without scanning for new channels. Secret is removing all tuners for me and starting from scratch as I use mine for OTA tuning. Last edited by trallyus; 06-26-2017 at 08:50 PM. |
#60
|
|||
|
|||
Quote:
Sorry for arguing with you and now I will slink off in shame ![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Replacement for Hauppauge WinTV-PVR-500 | troycheek | Hardware Support | 8 | 10-17-2011 08:21 PM |
Hauppauge WinTV-PVR-USB2 | MrVining | Hardware Support | 2 | 09-12-2009 08:11 AM |
There seems to be two Hauppauge WinTV USB/2 models? | Steve2112 | Hardware Support | 1 | 08-27-2006 03:36 AM |
Hauppauge WinTV 500 Problem | mike1961 | Hardware Support | 0 | 01-20-2006 02:06 AM |
Wintv pvr 150 vs the USB2 PVR from hauppauge? | steingra | Hardware Support | 9 | 10-14-2005 02:23 PM |