OpenDCT: An open source digital cable tuner.

[EnterNoEscape]

Originally Posted by jptheripper

logs attached

You have 64-bit Java installed. You will want to either uninstall 64-bit Java or use the 64-bit version of OpenDCT.

[jnickels]

Originally Posted by EnterNoEscape

I might have a new version of OpenDCT coming out soonish that addresses this issue, but it still involves waiting a little longer than usual (about 10 seconds) because if we don't, some channels could be missing audio streams.

Nice, I will keep an eye out.

Originally Posted by EnterNoEscape

This issue describes the problem in detail. Essentially the PMT packets don't get decrypted which causes problems. I think I pulled the video from from the link in the first post, but you can get 2 minutes of the problematic stream directly from your Prime if you use the link below.

http://192.168.0.142:5004/tuner1/v764?duration=120

Thanks for the links. Here is the results of the last link, incase it's helpful: https://drive.google.com/file/d/0B5V...ew?usp=sharing.

Thanks again for all your help!

[jptheripper]

Originally Posted by EnterNoEscape

You have 64-bit Java installed. You will want to either uninstall 64-bit Java or use the 64-bit version of OpenDCT.

pretty sure its 32bit

and according to this link
https://wiki.scn.sap.com/wiki/displa...+bit+or+64+bit
when i run java -version i get
java version "1.8.0_101"
Java(TM) SE Runtime Environment (build 1.8.0_101-b13)
Java HotSpot(TM) Client VM (build 25.101-b13, mixed mode)

Which also indicates 32bit

[EnterNoEscape]

Originally Posted by jptheripper

pretty sure its 32bit

and according to this link
https://wiki.scn.sap.com/wiki/displa...+bit+or+64+bit
when i run java -version i get
java version "1.8.0_101"
Java(TM) SE Runtime Environment (build 1.8.0_101-b13)
Java HotSpot(TM) Client VM (build 25.101-b13, mixed mode)

Which also indicates 32bit

Can you humor me and try the 64-bit OpenDCT install?

The exact error reported from the JVM is literally that it can't load wrapper.dll because the DLL is 32-bit and the JVM is 64-bit. Then FFmpeg can't initialize for the exact same reason. The soft link to java.exe is under C:\ProgramData\Oracle\Java\javapath\java.exe which should be the same java.exe you'll get from the environment path. It looks like based on what you're seeing on the command line, that doesn't appear to be the case for some reason.

[EnterNoEscape]

Originally Posted by jnickels

Thanks for the links. Here is the results of the last link, incase it's helpful: https://drive.google.com/file/d/0B5V...ew?usp=sharing.

Thanks again for all your help!

Unfortunately I don't think that file actually exhibits the problem I was describing. I'm not sure if these issues are sometimes temporary. Is the channel you got that from still not working well in OpenDCT?

No problem.

[jptheripper]

Originally Posted by EnterNoEscape

Can you humor me and try the 64-bit OpenDCT install?

The exact error reported from the JVM is literally that it can't load wrapper.dll because the DLL is 32-bit and the JVM is 64-bit. Then FFmpeg can't initialize for the exact same reason. The soft link to java.exe is under C:\ProgramData\Oracle\Java\javapath\java.exe which should be the same java.exe you'll get from the environment path. It looks like based on what you're seeing on the command line, that doesn't appear to be the case for some reason.

Id be happy to in the morning, anything to help!

[KryptoNyte]

Can the OpenDCT properties file be modified with the OpenDCT service running, then take effect on the next restart of the service?

[jptheripper]

Originally Posted by EnterNoEscape

Can you humor me and try the 64-bit OpenDCT install?

The exact error reported from the JVM is literally that it can't load wrapper.dll because the DLL is 32-bit and the JVM is 64-bit. Then FFmpeg can't initialize for the exact same reason. The soft link to java.exe is under C:\ProgramData\Oracle\Java\javapath\java.exe which should be the same java.exe you'll get from the environment path. It looks like based on what you're seeing on the command line, that doesn't appear to be the case for some reason.

Just installed the 64bit version. WAY MORE errors.

.jar" -Dwrapper.key="6_cEwzdZFJoKoDPH" -Dwrapper.port=32000 -Dwrapper.jvm.port.m
in=31000 -Dwrapper.jvm.port.max=31999 -Dwrapper.pid=2896 -Dwrapper.version="3.2.
3" -Dwrapper.native_library="wrapper" -Dwrapper.cpu.timeout="10" -Dwrapper.jvmid
=1 org.tanukisoftware.wrapper.WrapperSimpleApp opendct.Main
INFO | jvm 1 | 2016/11/20 16:02:40.392 | Wrapper (Version 3.2.3) http://wra
pper.tanukisoftware.org
INFO | jvm 1 | 2016/11/20 16:02:40.392 | Copyright 1999-2006 Tanuki Softw
are, Inc. All Rights Reserved.
INFO | jvm 1 | 2016/11/20 16:02:40.392 |
INFO | jvm 1 | 2016/11/20 16:02:40.392 |
INFO | jvm 1 | 2016/11/20 16:02:40.392 | WARNING - Unable to load the Wrapp
er's native library 'wrapper.dll'.
INFO | jvm 1 | 2016/11/20 16:02:40.393 | The file is located on t
he path at the following location but
INFO | jvm 1 | 2016/11/20 16:02:40.398 | could not be loaded:
INFO | jvm 1 | 2016/11/20 16:02:40.401 | C:\Program Files\OpenD
CT Authors\OpenDCT\jsw\.\lib\wrapper.dll
INFO | jvm 1 | 2016/11/20 16:02:40.406 | Please verify that the f
ile is readable by the current user
INFO | jvm 1 | 2016/11/20 16:02:40.412 | and that the file has no
t been corrupted in any way.
INFO | jvm 1 | 2016/11/20 16:02:40.417 | One common cause of this
problem is running a 32-bit version
INFO | jvm 1 | 2016/11/20 16:02:40.421 | of the Wrapper with a 64
-bit version of Java, or vica versa.

logs attached, i didnt let it run long
It is looking from wrapper dll at
C:\Program Files\OpenDCT Authors\OpenDCT\jsw\.\lib\wrapper.dll
when it is actually at
C:\Program Files\OpenDCT Authors\OpenDCT\jsw\lib\wrapper.dll

[EnterNoEscape]

Originally Posted by KryptoNyte

Can the OpenDCT properties file be modified with the OpenDCT service running, then take effect on the next restart of the service?

OpenDCT modifies properties and saves them at various times including on exit, so no, changes will not persist if you make them while the service is running.

On port 9091, there is a JSON service that can be used to configure OpenDCT while it is running, but it would be more usable with a web interface around it.

[EnterNoEscape]

Originally Posted by jptheripper

Just installed the 64bit version. WAY MORE errors.

.jar" -Dwrapper.key="6_cEwzdZFJoKoDPH" -Dwrapper.port=32000 -Dwrapper.jvm.port.m
in=31000 -Dwrapper.jvm.port.max=31999 -Dwrapper.pid=2896 -Dwrapper.version="3.2.
3" -Dwrapper.native_library="wrapper" -Dwrapper.cpu.timeout="10" -Dwrapper.jvmid
=1 org.tanukisoftware.wrapper.WrapperSimpleApp opendct.Main
INFO | jvm 1 | 2016/11/20 16:02:40.392 | Wrapper (Version 3.2.3) http://wra
pper.tanukisoftware.org
INFO | jvm 1 | 2016/11/20 16:02:40.392 | Copyright 1999-2006 Tanuki Softw
are, Inc. All Rights Reserved.
INFO | jvm 1 | 2016/11/20 16:02:40.392 |
INFO | jvm 1 | 2016/11/20 16:02:40.392 |
INFO | jvm 1 | 2016/11/20 16:02:40.392 | WARNING - Unable to load the Wrapp
er's native library 'wrapper.dll'.
INFO | jvm 1 | 2016/11/20 16:02:40.393 | The file is located on t
he path at the following location but
INFO | jvm 1 | 2016/11/20 16:02:40.398 | could not be loaded:
INFO | jvm 1 | 2016/11/20 16:02:40.401 | C:\Program Files\OpenD
CT Authors\OpenDCT\jsw\.\lib\wrapper.dll
INFO | jvm 1 | 2016/11/20 16:02:40.406 | Please verify that the f
ile is readable by the current user
INFO | jvm 1 | 2016/11/20 16:02:40.412 | and that the file has no
t been corrupted in any way.
INFO | jvm 1 | 2016/11/20 16:02:40.417 | One common cause of this
problem is running a 32-bit version
INFO | jvm 1 | 2016/11/20 16:02:40.421 | of the Wrapper with a 64
-bit version of Java, or vica versa.

logs attached, i didnt let it run long
It is looking from wrapper dll at
C:\Program Files\OpenDCT Authors\OpenDCT\jsw\.\lib\wrapper.dll
when it is actually at
C:\Program Files\OpenDCT Authors\OpenDCT\jsw\lib\wrapper.dll

I take it back. I didn't notice the dates in wrapper.log. The 64-bit errors were from September. The most recent entries are indicating you have a 32-bit JVM as you have indicated.

Edit: When is the last time you upgraded your firmware? One of the reasons the device will not load is because the property /sys/hwmodel doesn't exist on the capture device.

[jptheripper]

Originally Posted by EnterNoEscape

I take it back. I didn't notice the dates in wrapper.log. The 64-bit errors were from September. The most recent entries are indicating you have a 32-bit JVM as you have indicated.

Edit: When is the last time you upgraded your firmware? One of the reasons the device will not load is because the property /sys/hwmodel doesn't exist on the capture device.

20110830. Current is 20150826. Ummm.. I'll update

[tmiranda]

Originally Posted by EnterNoEscape

On port 9091, there is a JSON service that can be used to configure OpenDCT while it is running, but it would be more usable with a web interface around it.

Any documentation on this? It may be a nice UI Mod plugin project for me

[Fuzzy]

Originally Posted by tmiranda

Any documentation on this? It may be a nice UI Mod plugin project for me

You could start looking here I think: https://github.com/enternoescape/ope...noServlet.java

[EnterNoEscape]

Originally Posted by tmiranda

Any documentation on this? It may be a nice UI Mod plugin project for me

I don't want to put this too bluntly, but that interface was put there because you specifically were interested in having it.

I believe you received a few PM's with slightly better direction several months ago. I didn't document it much because I wasn't sure if what I had so far was good enough for what you wanted to do.

[EnterNoEscape]

Originally Posted by Fuzzy

You could start looking here I think: https://github.com/enternoescape/ope...noServlet.java

That's a good starting point. This is also a good place to get a little help on how you can create JSON replies to change settings, etc.

https://github.com/enternoescape/ope.../PojoUtil.java


This package pretty much has everything you would need to provide GSON to get usable POJO's on the SageTV side of things.

https://github.com/enternoescape/ope...anohttpd/pojo/

[tmiranda]

Originally Posted by EnterNoEscape

I don't want to put this too bluntly, but that interface was put there because you specifically were interested in having it.

I believe you received a few PM's with slightly better direction several months ago. I didn't document it much because I wasn't sure if what I had so far was good enough for what you wanted to do.

Point taken. I'll go back and look at those PMs again. I didn't realize these APIs where in there in the form you suggest.

[EnterNoEscape]

Originally Posted by EnterNoEscape

That's a good starting point. This is also a good place to get a little help on how you can create JSON replies to change settings, etc.

https://github.com/enternoescape/ope.../PojoUtil.java


This package pretty much has everything you would need to provide GSON to get usable POJO's on the SageTV side of things.

https://github.com/enternoescape/ope...anohttpd/pojo/

Adding a little more to this:
When POSTing to /general, /discovery/:discoverer, /devices/:capture_device or /consumers/:consumer you provide a JSON array of property/[value|values] pairs (key/value essentially). value is for single value properties and values is for array based properties. The easiest way to check these if needed is if value is null (it can be an empty string, just not null), then values should be populated. That way single value properties don't need to be stored in a single object array. Properties are filtered against the devices you're actually intending to update and a POST will not blindly write to the properties files. If you try to update something that doesn't exist, you will get a JsonException (in JSON). The wording in these exceptions is formatted well enough that it could be displayed if you so choose.

Ex.
POST http://localhost:9090/devices/-1831799213
[{
"property": "sagetv.device.-1831799213.consumer",
"value": "opendct.consumer.DynamicConsumerImpl"
},{
"property": "sagetv.device.-1831799213.streaming_url",
"value": "http://192.168.1.168/hdmi"
},{
"property": "sagetv.device.-1831799213.streaming_url2_channels",
"values": [ "502", "508" ]
}]

[heatvent]

I am using the latest beta that was installed using the automated Linux script on the forum on Ubuntu 14.04.3 Server LTS. OpenDCT seems to be installed

18:55:07.423 [SageTVRequestHandler-72CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - Replied: 'OK'
18:55:07.427 [SageTVDiscovery-53] DEBUG SageTVDiscovery - Received discovery datagram from SageTV server '/192.168.0.251:8270' and validating...
18:55:07.427 [SageTVDiscovery-53] DEBUG SageTVDiscovery - Validated discovery datagram from SageTV server '/192.168.0.251:8270' and preparing response...
18:55:07.427 [SageTVDiscovery-53] INFO SageTVDiscovery - Sent discovery response datagram to SageTV server '/192.168.0.251:8270'.
18:55:10.509 [SageTVRequestHandler-76:Unknown] DEBUG SageTVRequestHandler - SageTV sent: 'PROPERTIES'
18:55:10.511 [SageTVRequestHandler-76:Unknown] INFO SageTVRequestHandler - Sent PROPERTIES.
18:55:10.512 [SageTVRequestHandler-76:Unknown] DEBUG SageTVRequestHandler - SageTV sent: 'QUIT'
18:55:11.202 [UPnPDiscovery-33] DEBUG UpnpManager - Sending a SecureContainer search message for 'schemas-cetoncorp-com' devices...
18:55:15.202 [UPnPDiscovery-33] DEBUG UpnpManager - Sending a SecureContainer search message for 'schemas-cetoncorp-com' devices...
18:55:19.203 [UPnPDiscovery-33] DEBUG UpnpManager - Sending a SecureContainer search message for 'schemas-cetoncorp-com' devices...
18:55:23.203 [UPnPDiscovery-33] DEBUG UpnpManager - Sending a SecureContainer search message for 'schemas-cetoncorp-com' devices...
18:55:27.204 [UPnPDiscovery-33] DEBUG UpnpManager - Sending a SecureContainer search message for 'schemas-cetoncorp-com' devices...
18:55:27.204 [UPnPDiscovery-33] DEBUG UpnpManager - Stopping broadcast.
18:55:27.205 [UPnPDiscovery-33] DEBUG DiscoveryRegistryListener - Before shutdown, the registry has 2 device(s).
18:55:27.206 [UPnPDiscovery-33] DEBUG DiscoveryRegistryListener - Shutdown of UPnP registry complete.
18:55:33.208 [UPnPDiscovery-33] DEBUG UpnpManager - Broadcast requested.
18:55:33.208 [UPnPDiscovery-33] INFO DCTDefaultUpnpServiceConfiguration - Using the interface 'eth0' with IP address 192.168.0.251 for UPnP discovery.
18:55:37.210 [UPnPDiscovery-33] DEBUG UpnpManager - Sending a SecureContainer search message for 'schemas-cetoncorp-com' devices...
18:55:41.210 [UPnPDiscovery-33] DEBUG UpnpManager - Sending a SecureContainer search message for 'schemas-cetoncorp-com' devices...
18:55:45.211 [UPnPDiscovery-33] DEBUG UpnpManager - Sending a SecureContainer search message for 'schemas-cetoncorp-com' devices...
18:55:49.211 [UPnPDiscovery-33] DEBUG UpnpManager - Sending a SecureContainer search message for 'schemas-cetoncorp-com' devices...
18:55:53.211 [UPnPDiscovery-33] DEBUG UpnpManager - Sending a SecureContainer search message for 'schemas-cetoncorp-com' devices...
18:55:57.212 [UPnPDiscovery-33] DEBUG UpnpManager - Sending a SecureContainer search message for 'schemas-cetoncorp-com' devices...
18:56:01.212 [UPnPDiscovery-33] DEBUG UpnpManager - Sending a SecureContainer search message for 'schemas-cetoncorp-com' devices...
18:56:05.213 [UPnPDiscovery-33] DEBUG UpnpManager - Sending a SecureContainer search message for 'schemas-cetoncorp-com' devices...
18:56:05.213 [UPnPDiscovery-33] DEBUG UpnpManager - Stopping broadcast.
18:56:05.213 [UPnPDiscovery-33] WARN DiscoveryRegistryListener - Before UPnP shutdown, the registry did not contain any devices.
18:56:05.213 [UPnPDiscovery-33] DEBUG DiscoveryRegistryListener - Shutdown of UPnP registry complete.
18:56:23.268 [SageTVRequestHandler-79:Unknown] DEBUG SageTVRequestHandler - SageTV sent: 'START DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner|564085748|2|2959725166524|/var/media/tv/EntertainmentTonight-57946-0.ts|Great'
18:56:23.270 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Capture device is now locked.
18:56:23.271 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - Starting network encoder via upload ID '564085748' to file name '/var/media/tv/EntertainmentTonight-57946-0.ts'.
18:56:23.271 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.182
18:56:23.276 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: '1062731525' lockKey: '1062731525' sendLength: 45 address: 192.168.0.182
18:56:23.277 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - HDHomeRun is now locked.
18:56:23.278 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG RTPCaptureDeviceServices - Producer was not running.
18:56:23.278 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG BasicCaptureDevice - Consumer is was not in progress.
18:56:23.280 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG DynamicConsumerImpl - Using default consumer 'opendct.consumer.FFmpegTransSageTVConsumerImpl' for channel '2'
18:56:23.294 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Starting the encoding for the channel '2' from the device 'DCT-HDHomeRun Prime Tuner 1312C561-0' to the file '/var/media/tv/EntertainmentTonight-57946-0.ts'...
18:56:23.295 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO ChannelManager - Auto-map failed to get the frequency and program for the channel '2'.
18:56:23.295 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR HDHRNativeCaptureDevice - Unable to tune channel because no references were found for this channel number.
18:56:23.296 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR SageTVRequestHandler - SageTV sent: 'START DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner|564085748|2|2959725166524|/var/media/tv/EntertainmentTonight-57946-0.ts|Great', Replied: 'ERROR Device Start Failed'
18:56:23.296 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR SageTVRequestHandler - Encoder device is unable to start.
18:56:25.251 [ChannelManager-43] INFO ChannelManager - Updating the HDHomeRun channel lineup HDHomeRun DRI Tuner 1312C561 (qam_hdhomerun_1312c561).
18:56:25.251 [ChannelManager-43] INFO HDHomeRunChannels - Connecting to Prime DCT using the URL 'http://208.115.201.203:80/lineup.xml'
18:56:25.325 [ChannelManager-43] DEBUG HDHomeRunChannels - populateChannels created an unexpected exception => java.io.FileNotFoundException: http://208.115.201.203:80/lineup.xml
at sun.net.http://www.protocol.http.HttpURLConn...tion.java:1872)
at sun.net.http://www.protocol.http.HttpURLConn...tion.java:1474)
at opendct.channel.updater.http.HDHomeRunChannels.populateChannels(HDHomeRunChannels.java:173)
at opendct.channel.ChannelManager.updateChannelLineup(ChannelManager.java:478)
at opendct.channel.ChannelManager.updateChannelLineups(ChannelManager.java:464)
at opendct.channel.ChannelManager$2.run(ChannelManager.java:671)
at java.lang.Thread.run(Thread.java:745)

18:57:26.509 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - SageTV sent: 'STOP DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner'
18:57:26.509 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHRNativeCaptureDevice - Stopping encoding...
18:57:26.509 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG RTPCaptureDeviceServices - Producer was not running.
18:57:26.509 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG BasicCaptureDevice - Consumer is was not in progress.
18:57:26.509 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/channel' value: 'none' lockKey: '1062731525' sendLength: 39 address: 192.168.0.182
18:57:26.510 [HDHomeRunControlReceive-83] DEBUG HDHomeRunControl - ReceiveThread was unable to receive => java.io.IOException: Connection reset by peer
at sun.nio.ch.FileDispatcherImpl.read0(Native Method)
at sun.nio.ch.SocketDispatcher.read(SocketDispatcher.java:39)
at sun.nio.ch.IOUtil.readIntoNativeBuffer(IOUtil.java:223)
at sun.nio.ch.IOUtil.read(IOUtil.java:197)
at sun.nio.ch.SocketChannelImpl.read(SocketChannelImpl.java:380)
at opendct.tuning.hdhomerun.HDHomeRunControl$ReceiveThread.run(HDHomeRunControl.java:333)
at java.lang.Thread.run(Thread.java:745)

18:57:27.513 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR HDHRNativeCaptureDevice - Unable to stop HDHomeRun capture device because the command did not work => opendct.tuning.hdhomerun.GetSetException: ERROR: lock no longer held
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:207)
at opendct.tuning.hdhomerun.HDHomeRunTuner.set(HDHomeRunTuner.java:135)
at opendct.tuning.hdhomerun.HDHomeRunTuner.clearChannel(HDHomeRunTuner.java:268)
at opendct.capture.HDHRNativeCaptureDevice.stopEncoding(HDHRNativeCaptureDevice.java:1541)
at opendct.sagetv.SageTVRequestHandler.run(SageTVRequestHandler.java:163)
at java.lang.Thread.run(Thread.java:745)

18:57:27.514 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.182
18:57:27.515 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - HDHomeRun is now unlocked.
18:57:27.515 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Capture device is now unlocked.
18:57:27.515 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - Replied: 'OK'
18:57:27.515 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - SageTV sent: 'START DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner|1969844824|2|2959725295030|/var/media/tv/EntertainmentTonight-57946-1.ts|Great'
18:57:27.516 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Capture device is now locked.
18:57:27.516 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - Starting network encoder via upload ID '1969844824' to file name '/var/media/tv/EntertainmentTonight-57946-1.ts'.
18:57:27.516 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.182
18:57:27.517 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: '1062731525' lockKey: '1062731525' sendLength: 45 address: 192.168.0.182
18:57:27.517 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - HDHomeRun is now locked.
18:57:27.517 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG RTPCaptureDeviceServices - Producer was not running.
18:57:27.518 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG BasicCaptureDevice - Consumer is was not in progress.
18:57:27.518 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG DynamicConsumerImpl - Using default consumer 'opendct.consumer.FFmpegTransSageTVConsumerImpl' for channel '2'
18:57:27.533 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Starting the encoding for the channel '2' from the device 'DCT-HDHomeRun Prime Tuner 1312C561-0' to the file '/var/media/tv/EntertainmentTonight-57946-1.ts'...
18:57:27.534 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO ChannelManager - Auto-map failed to get the frequency and program for the channel '2'.
18:57:27.534 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR HDHRNativeCaptureDevice - Unable to tune channel because no references were found for this channel number.
18:57:27.536 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR SageTVRequestHandler - SageTV sent: 'START DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner|1969844824|2|2959725295030|/var/media/tv/EntertainmentTonight-57946-1.ts|Great', Replied: 'ERROR Device Start Failed'
18:57:27.536 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR SageTVRequestHandler - Encoder device is unable to start.
18:58:41.500 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - SageTV sent: 'STOP DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner'
18:58:41.500 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHRNativeCaptureDevice - Stopping encoding...
18:58:41.501 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG RTPCaptureDeviceServices - Producer was not running.
18:58:41.501 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG BasicCaptureDevice - Consumer is was not in progress.
18:58:41.501 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/channel' value: 'none' lockKey: '1062731525' sendLength: 39 address: 192.168.0.182
18:58:41.503 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR HDHRNativeCaptureDevice - Unable to stop HDHomeRun capture device because the command did not work => opendct.tuning.hdhomerun.GetSetException: ERROR: lock no longer held
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:207)
at opendct.tuning.hdhomerun.HDHomeRunTuner.set(HDHomeRunTuner.java:135)
at opendct.tuning.hdhomerun.HDHomeRunTuner.clearChannel(HDHomeRunTuner.java:268)
at opendct.capture.HDHRNativeCaptureDevice.stopEncoding(HDHRNativeCaptureDevice.java:1541)
at opendct.sagetv.SageTVRequestHandler.run(SageTVRequestHandler.java:163)
at java.lang.Thread.run(Thread.java:745)

18:58:41.503 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.182
18:58:41.505 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - HDHomeRun is now unlocked.
18:58:41.505 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Capture device is now unlocked.
18:58:41.505 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - Replied: 'OK'
18:58:41.506 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - SageTV sent: 'START DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner|1306082701|2|2959725443012|/var/media/tv/EntertainmentTonight-57946-2.ts|Great'
18:58:41.506 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Capture device is now locked.
18:58:41.506 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - Starting network encoder via upload ID '1306082701' to file name '/var/media/tv/EntertainmentTonight-57946-2.ts'.
18:58:41.506 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.182
18:58:41.509 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: '1062731525' lockKey: '1062731525' sendLength: 45 address: 192.168.0.182
18:58:41.509 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - HDHomeRun is now locked.
18:58:41.509 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG RTPCaptureDeviceServices - Producer was not running.
18:58:41.509 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG BasicCaptureDevice - Consumer is was not in progress.
18:58:41.510 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG DynamicConsumerImpl - Using default consumer 'opendct.consumer.FFmpegTransSageTVConsumerImpl' for channel '2'
18:58:41.527 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Starting the encoding for the channel '2' from the device 'DCT-HDHomeRun Prime Tuner 1312C561-0' to the file '/var/media/tv/EntertainmentTonight-57946-2.ts'...
18:58:41.527 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO ChannelManager - Auto-map failed to get the frequency and program for the channel '2'.
18:58:41.527 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR HDHRNativeCaptureDevice - Unable to tune channel because no references were found for this channel number.
18:58:41.527 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR SageTVRequestHandler - SageTV sent: 'START DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner|1306082701|2|2959725443012|/var/media/tv/EntertainmentTonight-57946-2.ts|Great', Replied: 'ERROR Device Start Failed'
18:58:41.527 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR SageTVRequestHandler - Encoder device is unable to start.
18:59:44.411 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - SageTV sent: 'STOP DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner'
18:59:44.411 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHRNativeCaptureDevice - Stopping encoding...
18:59:44.411 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG RTPCaptureDeviceServices - Producer was not running.
18:59:44.411 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG BasicCaptureDevice - Consumer is was not in progress.
18:59:44.412 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/channel' value: 'none' lockKey: '1062731525' sendLength: 39 address: 192.168.0.182
18:59:44.415 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR HDHRNativeCaptureDevice - Unable to stop HDHomeRun capture device because the command did not work => opendct.tuning.hdhomerun.GetSetException: ERROR: lock no longer held
at opendct.tuning.hdhomerun.HDHomeRunControl.setVariable(HDHomeRunControl.java:207)
at opendct.tuning.hdhomerun.HDHomeRunTuner.set(HDHomeRunTuner.java:135)
at opendct.tuning.hdhomerun.HDHomeRunTuner.clearChannel(HDHomeRunTuner.java:268)
at opendct.capture.HDHRNativeCaptureDevice.stopEncoding(HDHRNativeCaptureDevice.java:1541)
at opendct.sagetv.SageTVRequestHandler.run(SageTVRequestHandler.java:163)
at java.lang.Thread.run(Thread.java:745)

18:59:44.416 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.182
18:59:44.419 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - HDHomeRun is now unlocked.
18:59:44.419 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Capture device is now unlocked.
18:59:44.419 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - Replied: 'OK'
18:59:54.631 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - SageTV sent: 'START DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner|1105310582|2|2959725589262|/var/media/tv/EntertainmentTonight-57946-0.ts|Great'
18:59:54.632 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Capture device is now locked.
18:59:54.632 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - Starting network encoder via upload ID '1105310582' to file name '/var/media/tv/EntertainmentTonight-57946-0.ts'.
18:59:54.632 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.182
18:59:54.634 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: '1062731525' lockKey: '1062731525' sendLength: 45 address: 192.168.0.182
18:59:54.635 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - HDHomeRun is now locked.
18:59:54.635 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG RTPCaptureDeviceServices - Producer was not running.
18:59:54.635 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG BasicCaptureDevice - Consumer is was not in progress.
18:59:54.635 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG DynamicConsumerImpl - Using default consumer 'opendct.consumer.FFmpegTransSageTVConsumerImpl' for channel '2'
18:59:54.654 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Starting the encoding for the channel '2' from the device 'DCT-HDHomeRun Prime Tuner 1312C561-0' to the file '/var/media/tv/EntertainmentTonight-57946-0.ts'...
18:59:54.654 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO ChannelManager - Auto-map failed to get the frequency and program for the channel '2'.
18:59:54.654 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR HDHRNativeCaptureDevice - Unable to tune channel because no references were found for this channel number.
18:59:54.655 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR SageTVRequestHandler - SageTV sent: 'START DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner|1105310582|2|2959725589262|/var/media/tv/EntertainmentTonight-57946-0.ts|Great', Replied: 'ERROR Device Start Failed'
18:59:54.655 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR SageTVRequestHandler - Encoder device is unable to start.
19:00:00.001 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - SageTV sent: 'STOP DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner'
19:00:00.002 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHRNativeCaptureDevice - Stopping encoding...
19:00:00.002 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG RTPCaptureDeviceServices - Producer was not running.
19:00:00.002 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG BasicCaptureDevice - Consumer is was not in progress.
19:00:00.002 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/channel' value: 'none' lockKey: '1062731525' sendLength: 39 address: 192.168.0.182
19:00:00.004 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/target' value: 'none' lockKey: '1062731525' sendLength: 38 address: 192.168.0.182
19:00:00.004 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.182
19:00:00.005 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: 'none' lockKey: '1062731525' sendLength: 39 address: 192.168.0.182
19:00:00.007 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.182
19:00:00.010 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - HDHomeRun is now unlocked.
19:00:00.011 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Capture device is now unlocked.
19:00:00.011 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - Replied: 'OK'
19:00:00.012 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - SageTV sent: 'START DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner|685203458|2|2959725600022|/var/media/tv/NCIS-EnemyCombatant-58118-0.ts|Great'
19:00:00.012 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Capture device is now locked.
19:00:00.012 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG SageTVRequestHandler - Starting network encoder via upload ID '685203458' to file name '/var/media/tv/NCIS-EnemyCombatant-58118-0.ts'.
19:00:00.012 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: 'null' lockKey: '0' sendLength: 26 address: 192.168.0.182
19:00:00.013 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG HDHomeRunControl - key: '/tuner0/lockkey' value: '1062731525' lockKey: '1062731525' sendLength: 45 address: 192.168.0.182
19:00:00.014 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - HDHomeRun is now locked.
19:00:00.014 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG RTPCaptureDeviceServices - Producer was not running.
19:00:00.014 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG BasicCaptureDevice - Consumer is was not in progress.
19:00:00.014 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] DEBUG DynamicConsumerImpl - Using default consumer 'opendct.consumer.FFmpegTransSageTVConsumerImpl' for channel '2'
19:00:00.034 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO HDHRNativeCaptureDevice - Starting the encoding for the channel '2' from the device 'DCT-HDHomeRun Prime Tuner 1312C561-0' to the file '/var/media/tv/NCIS-EnemyCombatant-58118-0.ts'...
19:00:00.036 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] INFO ChannelManager - Auto-map failed to get the frequency and program for the channel '2'.
19:00:00.037 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR HDHRNativeCaptureDevice - Unable to tune channel because no references were found for this channel number.
19:00:00.037 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR SageTVRequestHandler - SageTV sent: 'START DCT-HDHomeRun Prime Tuner 1312C561-0 Digital TV Tuner|685203458|2|2959725600022|/var/media/tv/NCIS-EnemyCombatant-58118-0.ts|Great', Replied: 'ERROR Device Start Failed'
19:00:00.037 [SageTVRequestHandler-79CT-HDHomeRun Prime Tuner 1312C561-0] ERROR SageTVRequestHandler - Encoder device is unable to start.
[/CODE]

Any thoughts on troubleshooting?

[EnterNoEscape]

The first thing I'm noticing is that you are likely not running the latest beta. It fixes the unlikely IP address (208.115.201.203) you are getting for the HDHomeRun when it's getting the lineup information.

The second thing I'm noticing is that OpenDCT needed to do a frequency-program lookup for your Prime. Does it have a CableCARD installed? It looks like it's being used as a ClearQAM device. OpenDCT can work with QAM, but it needs another capture device that actually has a CableCARD installed to use as a channel mapping reference.

[heatvent]

Thanks for the help (and quick reply)!

I will try to install/make sure I have the latest beta.

Re: the cablecard...I should have mentioned that. My cable provider does not encrypt most of the channels (i.e. the basic package) which I have so I don't use a cablecard currently. Is there a way to setup openDCT with a HDHR Prime without use of a cablecard? If not, is there a HDHR device that would work without cablecard?