Interest in HDHomeRun Prime Network Encoder

[jvl711]

Originally Posted by nyplayer

I only want to lock it while it is recording ... not when it is not in use. I did some testing and was able to grab the tuner while it was recording and it Interrupted the recording... Under no circumstances do I want a lock on it if not in use.

If a tuner is not locked while recording any person on the network using DLNA can steal that tuner and lock it.

I already looked at this a little bit. I will look into this for the next version as well as some of the other items. I am going to release what I have now to everyone. I think it is stable enough.

[nyplayer]

Originally Posted by jvl711

I already looked at this a little bit. I will look into this for the next version as well as some of the other items. I am going to release what I have now to everyone. I think it is stable enough.

Thanks looking forward to it... Has been rock solid so far.

[nyplayer]

Here is a debug log using Legacy tuner SageTV will not tune.

[jvl711]

Originally Posted by nyplayer

Here is a debug log using Legacy tuner SageTV will not tune.

Can you attach the PrimeNetEncoder log for the tuner to. I wonder if Sage is passing me all the info I need.

[nyplayer]

Originally Posted by jvl711

Can you attach the PrimeNetEncoder log for the tuner to. I wonder if Sage is passing me all the info I need.

04/03/2015 15:34:31 - Setting local IP address to: 192.168.0.104
04/03/2015 15:34:31 - Starting encoder thread: 103BEC4D-1
04/03/2015 15:35:18 - -------------------------------------------------------------------------------
04/03/2015 15:35:18 - Switching Channel for Tuner: 103BEC4D 1
04/03/2015 15:35:18 - -------------------------------------------------------------------------------
04/03/2015 15:35:18 - Local IP: 192.168.0.104
04/03/2015 15:35:18 - Listening Port: 7008
04/03/2015 15:35:18 - ffmpeg Transcode Port: 5080
04/03/2015 15:35:18 - Starting transcoder: \\Edwinperez\sagetest\SteveHarvey-S03E134-SteveHelpsTwoFemaleERDoctorsWhoDontHaveTimetoFindaManMarkBurnettandRomaDowneyTalkAboutTheirBibleThemedSeries-337957-1.ts
04/03/2015 15:35:18 - Passing stream to file unaltered
04/03/2015 15:35:19 - Switch channel: 2.1
04/03/2015 15:35:19 - Send stream to transcoder: 5080


If I change the channel oustide of Sagetv using batch below I can record that channel and view it.

"C:\Program Files\Silicondust\HDHomeRun\hdhomerun_config.exe" 103BEC4D set /tuner1/channel auto:43
"C:\Program Files\Silicondust\HDHomeRun\hdhomerun_config.exe" 103BEC4D set /tuner1/program 3

I can also witch mapping to this but it stll does not tune.
04/03/2015 15:39:27 - Switching Channel for Tuner: 103BEC4D 1
04/03/2015 15:39:27 - -------------------------------------------------------------------------------
04/03/2015 15:39:27 - Local IP: 192.168.0.104
04/03/2015 15:39:27 - Listening Port: 7008
04/03/2015 15:39:27 - ffmpeg Transcode Port: 5080
04/03/2015 15:39:27 - Starting transcoder: \\Edwinperez\sagetest\SteveHarvey-S03E134-SteveHelpsTwoFemaleERDoctorsWhoDontHaveTimetoFindaManMarkBurnettandRomaDowneyTalkAboutTheirBibleThemedSeries-337957-1.ts
04/03/2015 15:39:27 - Passing stream to file unaltered
04/03/2015 15:39:28 - Switch channel: 43.3
04/03/2015 15:39:28 - Send stream to transcoder: 5080

I have attached a picture of the channels.

[jvl711]

Originally Posted by nyplayer

04/03/2015 15:34:31 - Setting local IP address to: 192.168.0.104
04/03/2015 15:34:31 - Starting encoder thread: 103BEC4D-1
04/03/2015 15:35:18 - -------------------------------------------------------------------------------
04/03/2015 15:35:18 - Switching Channel for Tuner: 103BEC4D 1
04/03/2015 15:35:18 - -------------------------------------------------------------------------------
04/03/2015 15:35:18 - Local IP: 192.168.0.104
04/03/2015 15:35:18 - Listening Port: 7008
04/03/2015 15:35:18 - ffmpeg Transcode Port: 5080
04/03/2015 15:35:18 - Starting transcoder: \\Edwinperez\sagetest\SteveHarvey-S03E134-SteveHelpsTwoFemaleERDoctorsWhoDontHaveTimetoFindaManMarkBurnettandRomaDowneyTalkAboutTheirBibleThemedSeries-337957-1.ts
04/03/2015 15:35:18 - Passing stream to file unaltered
04/03/2015 15:35:19 - Switch channel: 2.1
04/03/2015 15:35:19 - Send stream to transcoder: 5080


If I change the channel oustide of Sagetv using batch below I can record that channel and view it.

"C:\Program Files\Silicondust\HDHomeRun\hdhomerun_config.exe" 103BEC4D set /tuner1/channel auto:43
"C:\Program Files\Silicondust\HDHomeRun\hdhomerun_config.exe" 103BEC4D set /tuner1/program 3

I can also witch mapping to this but it stll does not tune.
04/03/2015 15:39:27 - Switching Channel for Tuner: 103BEC4D 1
04/03/2015 15:39:27 - -------------------------------------------------------------------------------
04/03/2015 15:39:27 - Local IP: 192.168.0.104
04/03/2015 15:39:27 - Listening Port: 7008
04/03/2015 15:39:27 - ffmpeg Transcode Port: 5080
04/03/2015 15:39:27 - Starting transcoder: \\Edwinperez\sagetest\SteveHarvey-S03E134-SteveHelpsTwoFemaleERDoctorsWhoDontHaveTimetoFindaManMarkBurnettandRomaDowneyTalkAboutTheirBibleThemedSeries-337957-1.ts
04/03/2015 15:39:27 - Passing stream to file unaltered
04/03/2015 15:39:28 - Switch channel: 43.3
04/03/2015 15:39:28 - Send stream to transcoder: 5080

I have attached a picture of the channels.

Perfect. Exactly what I was hoping for. I can look for a period in the channel being passed, and if a period is present switch channel using channel and program command. If no period is present switch channel using vchannel.

I am going on vacation for the next week, but when I get back I will look at adding some of the features you and I have been talking about.

[nyplayer]

Originally Posted by jvl711

Perfect. Exactly what I was hoping for. I can look for a period in the channel being passed, and if a period is present switch channel using channel and program command. If no period is present switch channel using vchannel.

I am going on vacation for the next week, but when I get back I will look at adding some of the features you and I have been talking about.

Ok thank you and enjoy your vacation.

[FriscoJohn]

Showing my newbie colors here.

I'm trying to install PrimeNetEncoder per JVL711's instructions in his InstallGuide. I'm stuck on this step:

"2. Download appropriate ffmpeg package for your platform (I am currently using 2.6.1)
a. Place ffmpeg.exe in PrimeNetEncoder folder"


I downloaded the 2.6.1 version from ffmpeg.org, as suggested. The problem is there is no ffmpeg.exe in the download. What I have looks is a bunch of files and folders which look like they need to be compiled to generate an .exe file--presumably I need a C compiler to do it, which I don't have. Looking around the ffmpeg.org site I can't find any way to download a pre-compiled ffmpeg.exe. What to do?

Suggestions will be greatly appreciated.

-------------------------------------------
Intel I7, Windows7, SageTV V 7.1.9.256, HDHRPrime, PlayOn, PlayLater

[nyplayer]

Originally Posted by FriscoJohn

Showing my newbie colors here.

I'm trying to install PrimeNetEncoder per JVL711's instructions in his InstallGuide. I'm stuck on this step:

"2. Download appropriate ffmpeg package for your platform (I am currently using 2.6.1)
a. Place ffmpeg.exe in PrimeNetEncoder folder"


I downloaded the 2.6.1 version from ffmpeg.org, as suggested. The problem is there is no ffmpeg.exe in the download. What I have looks is a bunch of files and folders which look like they need to be compiled to generate an .exe file--presumably I need a C compiler to do it, which I don't have. Looking around the ffmpeg.org site I can't find any way to download a pre-compiled ffmpeg.exe. What to do?

Suggestions will be greatly appreciated.

-------------------------------------------
Intel I7, Windows7, SageTV V 7.1.9.256, HDHRPrime, PlayOn, PlayLater

Go here doeload the static one then unpack look in the bin folder.
http://ffmpeg.zeranoe.com/builds/

[FriscoJohn]

Thanks, NYPlayer. As always, you're the man!

Oh, one thing. I assume that should be the 32 bit static rather than the 64 bit static, right?

[nyplayer]

Originally Posted by FriscoJohn

Thanks, NYPlayer. As always, you're the man!

Oh, one thing. I assume that should be the 32 bit static rather than the 64 bit static, right?

You can use 64 bit.

[jm9843]

Originally Posted by jvl711

I am going to release what I have now to everyone. I think it is stable enough.

I'd like to give it a try.

[nyplayer]

Originally Posted by jm9843

I'd like to give it a try.

It is already released see this thread. Post any issues in the thread below.
http://forums.sagetv.com/forums/showthread.php?t=62055

[Vaskill]

Originally Posted by nyplayer

I tested all my tuners I have the Original 2 input tuners a Dual Tuner and the newer Dlna Ota tuners. They all work I am going to switch to using the encoder for all my tuners. No more faulty recordings.

As per my other thread, I can't seem to get a stream from my HDHR Plus to record using PrimeNetEncoder. I can get it to recognize the network encoder, set up tuner, change channel, ffmpeg starts, sage creates a 0.00mb file, but no data. Any thoughts?

[John.Kelly]

Originally Posted by jvl711

Hi,

I was having some issue with SageDCT, so I decided to make my own Network Encoder for the HDHomeRun Prime. I was wondering if there is interest out there for another option to SageDCT. Let me know if there is and I will package up a beta version of what I have and release if for other people to try.

The encoder was written in Java 1.7, and only requires HDHomeRun_config.exe and ffmpeg.exe. I think it should be able to be used on Windows, Linux and Mac. I am currently using it in Windows Server 2003.

Thanks,
Josh

I also have a new HDHomeRun Prime that is not yet working with SageTV. Let me know what I could do to help.

[nyplayer]

Originally Posted by John.Kelly

I also have a new HDHomeRun Prime that is not yet working with SageTV. Let me know what I could do to help.

Help????? This has already been released. If you need help setting up post on thread below.

http://forums.sagetv.com/forums/showthread.php?t=62055