[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-11.35-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.2 present.
[17179569.184000] ACPI: RSDP (v000 Nvidia                                ) @ 0x000f75e0
[17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
[17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7640
[17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ14 used by override.
[17179569.184000] ACPI: IRQ15 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1837.626 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.460000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179572.460000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.488000] Memory: 1029628k/1048512k available (1911k kernel code, 18108k reserved, 1073k data, 308k init, 131008k highmem)
[17179572.488000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179572.568000] Calibrating delay using timer specific routine.. 3679.34 BogoMIPS (lpj=7358685)
[17179572.568000] Security Framework v1.0.0 initialized
[17179572.568000] SELinux:  Disabled at boot.
[17179572.568000] Mount-cache hash table entries: 512
[17179572.568000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179572.568000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179572.568000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179572.568000] CPU: L2 Cache: 512K (64 bytes/line)
[17179572.568000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179572.568000] Checking 'hlt' instruction... OK.
[17179572.584000] SMP alternatives: switching to UP code
[17179572.584000] Freeing SMP alternatives: 16k freed
[17179572.584000] checking if image is initramfs... it is
[17179573.068000] Freeing initrd memory: 5327k freed
[17179573.068000] ACPI: Core revision 20060707
[17179573.076000] ACPI: Looking for DSDT ... not found!
[17179573.080000] CPU0: AMD Athlon(tm) XP 2500+ stepping 00
[17179573.080000] Total of 1 processors activated (3679.34 BogoMIPS).
[17179573.080000] ENABLING IO-APIC IRQs
[17179573.080000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179573.224000] Brought up 1 CPUs
[17179573.224000] migration_cost=0
[17179573.224000] NET: Registered protocol family 16
[17179573.224000] EISA bus registered
[17179573.224000] ACPI: bus type pci registered
[17179573.240000] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=4
[17179573.240000] PCI: Using configuration type 1
[17179573.240000] Setting up standard PCI resources
[17179573.252000] ACPI: Interpreter enabled
[17179573.252000] ACPI: Using IOAPIC for interrupt routing
[17179573.252000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.252000] PCI: Probing PCI hardware (bus 00)
[17179573.256000] PCI: nForce2 C1 Halt Disconnect fixup
[17179573.256000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:09.0
[17179573.260000] Boot video device is 0000:04:00.0
[17179573.260000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.328000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179573.328000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[17179573.328000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179573.328000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179573.328000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179573.328000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179573.332000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179573.332000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179573.332000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[17179573.332000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179573.332000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179573.332000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[17179573.332000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179573.332000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179573.332000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179573.332000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179573.332000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179573.336000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179573.336000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[17179573.336000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[17179573.336000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[17179573.336000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[17179573.336000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179573.336000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[17179573.336000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[17179573.336000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[17179573.336000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[17179573.336000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[17179573.340000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[17179573.340000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[17179573.340000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[17179573.340000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[17179573.340000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[17179573.340000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[17179573.344000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.344000] pnp: PnP ACPI init
[17179573.348000] pnp: PnP ACPI: found 15 devices
[17179573.348000] PnPBIOS: Disabled by ACPI PNP
[17179573.348000] PCI: Using ACPI for IRQ routing
[17179573.348000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179573.444000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[17179573.444000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[17179573.444000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[17179573.444000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[17179573.444000] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[17179573.444000] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[17179573.444000] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[17179573.444000] pnp: 00:01: ioport range 0x5500-0x553f has been reserved
[17179573.444000] PCI: Bridge: 0000:01:0a.0
[17179573.444000]   IO window: disabled.
[17179573.444000]   MEM window: disabled.
[17179573.444000]   PREFETCH window: d8000000-dfffffff
[17179573.444000] PCI: Bridge: 0000:00:08.0
[17179573.444000]   IO window: 9000-afff
[17179573.444000]   MEM window: e7000000-e8ffffff
[17179573.444000]   PREFETCH window: d0000000-dfffffff
[17179573.444000] PCI: Bridge: 0000:00:1e.0
[17179573.444000]   IO window: c000-cfff
[17179573.444000]   MEM window: e5000000-e6ffffff
[17179573.444000]   PREFETCH window: c0000000-cfffffff
[17179573.444000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[17179573.444000] NET: Registered protocol family 2
[17179573.484000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179573.484000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179573.484000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179573.484000] TCP: Hash tables configured (established 131072 bind 65536)
[17179573.484000] TCP reno registered
[17179573.484000] audit: initializing netlink socket (disabled)
[17179573.484000] audit(1174533452.484:1): initialized
[17179573.484000] highmem bounce pool size: 64 pages
[17179573.484000] VFS: Disk quotas dquot_6.5.1
[17179573.484000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.484000] Initializing Cryptographic API
[17179573.484000] io scheduler noop registered
[17179573.484000] io scheduler anticipatory registered
[17179573.484000] io scheduler deadline registered
[17179573.484000] io scheduler cfq registered (default)
[17179573.484000] isapnp: Scanning for PnP cards...
[17179573.840000] isapnp: No Plug & Play device found
[17179573.864000] Real Time Clock Driver v1.12ac
[17179573.864000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179573.864000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.864000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179573.864000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.864000] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179573.864000] mice: PS/2 mouse device common for all mice
[17179573.864000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.864000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.864000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.868000] PNP: No PS/2 controller found. Probing ports directly.
[17179573.868000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179573.868000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.868000] EISA: Probing bus 0 at eisa.0
[17179573.868000] Cannot allocate resource for EISA slot 4
[17179573.868000] Cannot allocate resource for EISA slot 5
[17179573.868000] EISA: Detected 0 cards.
[17179573.868000] TCP bic registered
[17179573.868000] NET: Registered protocol family 1
[17179573.868000] NET: Registered protocol family 8
[17179573.868000] NET: Registered protocol family 20
[17179573.868000] Using IPI No-Shortcut mode
[17179573.868000] ACPI: (supports S0 S1 S4 S5)
[17179573.868000] Freeing unused kernel memory: 308k freed
[17179574.996000] Capability LSM initialized
[17179575.348000] SCSI subsystem initialized
[17179575.348000] libata version 1.20 loaded.
[17179575.352000] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[17179575.352000] NFORCE2: chipset revision 162
[17179575.352000] NFORCE2: not 100% native mode: will probe irqs later
[17179575.352000] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[17179575.352000] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[17179575.352000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[17179575.352000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[17179575.352000] Probing IDE interface ide0...
[17179575.644000] hda: Maxtor 6Y250P0, ATA DISK drive
[17179576.316000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.320000] Probing IDE interface ide1...
[17179577.056000] hdc: LITE-ON DVDRW SOHW-812S, ATAPI CD/DVD-ROM drive
[17179577.728000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.736000] hda: max request size: 512KiB
[17179577.740000] hda: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63, UDMA(133)
[17179577.744000] hda: cache flushes supported
[17179577.744000]  hda: hda1 hda2 < hda5 >
[17179577.776000] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179577.776000] Uniform CD-ROM driver Revision: 3.20
[17179577.972000] sata_sil 0000:01:0b.0: version 0.9
[17179577.972000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[17179577.972000] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 177
[17179577.972000] ata1: SATA max UDMA/100 cmd 0xF887C080 ctl 0xF887C08A bmdma 0xF887C000 irq 177
[17179577.972000] ata2: SATA max UDMA/100 cmd 0xF887C0C0 ctl 0xF887C0CA bmdma 0xF887C008 irq 177
[17179578.176000] ata1: SATA link down (SStatus 0)
[17179578.184000] scsi0 : sata_sil
[17179578.388000] ata2: SATA link down (SStatus 0)
[17179578.396000] scsi1 : sata_sil
[17179578.516000] ieee1394: Initialized config rom entry `ip1394'
[17179578.516000] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
[17179578.516000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 22 (level, high) -> IRQ 185
[17179578.516000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[17179578.568000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185]  MMIO=[e9084000-e90847ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[17179578.576000] usbcore: registered new driver usbfs
[17179578.576000] usbcore: registered new driver hub
[17179578.576000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179578.576000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[17179578.576000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 193
[17179578.576000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179578.576000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179578.576000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179578.604000] ohci_hcd 0000:00:02.0: irq 193, io mem 0xe9086000
[17179578.660000] usb usb1: configuration #1 chosen from 1 choice
[17179578.660000] hub 1-0:1.0: USB hub found
[17179578.660000] hub 1-0:1.0: 3 ports detected
[17179578.764000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
[17179578.764000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 201
[17179578.764000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179578.764000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179578.764000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[17179578.792000] ohci_hcd 0000:00:02.1: irq 201, io mem 0xe9081000
[17179578.848000] usb usb2: configuration #1 chosen from 1 choice
[17179578.848000] hub 2-0:1.0: USB hub found
[17179578.848000] hub 2-0:1.0: 3 ports detected
[17179578.952000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[17179578.952000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 185
[17179578.952000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179578.952000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179578.952000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[17179578.952000] ehci_hcd 0000:00:02.2: debug port 1
[17179578.952000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[17179578.952000] ehci_hcd 0000:00:02.2: irq 185, io mem 0xe9082000
[17179578.952000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179578.952000] usb usb3: configuration #1 chosen from 1 choice
[17179578.952000] hub 3-0:1.0: USB hub found
[17179578.952000] hub 3-0:1.0: 6 ports detected
[17179579.096000] Attempting manual resume
[17179579.128000] kjournald starting.  Commit interval 5 seconds
[17179579.128000] EXT3-fs: mounted filesystem with ordered data mode.
[17179579.680000] ohci1394: fw-host0: SelfID received outside of bus reset sequence
[17179579.952000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000062aa67]
[17179580.352000] ohci_hcd 0000:00:02.1: wakeup
[17179580.736000] usb 1-1: new low speed USB device using ohci_hcd and address 3
[17179580.948000] usb 1-1: configuration #1 chosen from 1 choice
[17179581.256000] usb 1-2: new full speed USB device using ohci_hcd and address 4
[17179581.472000] usb 1-2: configuration #1 chosen from 1 choice
[17179581.780000] usb 2-1: new low speed USB device using ohci_hcd and address 2
[17179581.996000] usb 2-1: configuration #1 chosen from 1 choice
[17179582.300000] usb 2-2: new low speed USB device using ohci_hcd and address 3
[17179582.512000] usb 2-2: configuration #1 chosen from 1 choice
[17179588.492000] Linux agpgart interface v0.101 (c) Dave Jones
[17179588.496000] agpgart: Detected NVIDIA nForce2 chipset
[17179588.500000] agpgart: AGP aperture is 64M @ 0xe0000000
[17179588.616000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179588.660000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179588.740000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[17179588.740000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
[17179588.776000] input: PC Speaker as /class/input/input0
[17179588.856000] parport: PnPBIOS parport detected.
[17179588.856000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179588.888000] Floppy drive(s): fd0 is 1.44M
[17179588.904000] FDC 0 is a post-1991 82077
[17179588.964000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179588.964000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[17179588.964000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 21 (level, high) -> IRQ 193
[17179588.964000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179589.428000] usbcore: registered new driver hiddev
[17179589.436000] input: ??¡???? ?????????????????????????????? as /class/input/input1
[17179589.436000] input: USB HID v1.00 Keyboard [??¡???? ??????????????????????????????] on usb-0000:00:02.0-1
[17179589.452000] input: ??¡???? ?????????????????????????????? as /class/input/input2
[17179589.452000] input,hiddev96: USB HID v1.00 Mouse [??¡???? ??????????????????????????????] on usb-0000:00:02.0-1
[17179589.460000] input: Chicony Compaq Internet Keyboard as /class/input/input3
[17179589.460000] input: USB HID v1.10 Keyboard [Chicony Compaq Internet Keyboard] on usb-0000:00:02.1-1
[17179589.480000] input: Chicony Compaq Internet Keyboard as /class/input/input4
[17179589.480000] input,hiddev97: USB HID v1.10 Device [Chicony Compaq Internet Keyboard] on usb-0000:00:02.1-1
[17179589.484000] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
[17179589.484000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[17179589.484000] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 209
[17179589.484000] skge 1.5 addr 0xe8000000 irq 209 chip Yukon-Lite rev 7
[17179589.484000] skge eth1: addr 00:0e:a6:75:a4:fc
[17179589.484000] Linux video capture interface: v1.00
[17179589.488000] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input5
[17179589.488000] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.1-2
[17179589.488000] usbcore: registered new driver usbhid
[17179589.488000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179589.620000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[17179589.620000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 201
[17179589.620000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179589.696000] skge eth1: enabling interface
[17179589.712000] eth0: no link during initialization.
[17179589.716000] ivtv:  ==================== START INIT IVTV ====================
[17179589.716000] ivtv:  version 0.7.0 (tagged release) loading
[17179589.716000] ivtv:  Linux version: 2.6.17-11-generic SMP mod_unload 586 REGPARM gcc-4.1
[17179589.716000] ivtv:  In case of problems please include the debug info between
[17179589.716000] ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
[17179589.716000] ivtv:  any module options, when mailing the ivtv-users mailinglist.
[17179589.768000] usbcore: registered new driver usbserial
[17179589.772000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[17179589.772000] usbcore: registered new driver usbserial_generic
[17179589.772000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[17179589.772000] drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
[17179589.772000] ftdi_sio 1-2:1.0: FTDI USB Serial Device converter detected
[17179589.772000] drivers/usb/serial/ftdi_sio.c: Detected FT232BM
[17179589.772000] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0
[17179589.772000] usbcore: registered new driver ftdi_sio
[17179589.772000] drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
[17179589.916000] ts: Compaq touchscreen protocol output
[17179589.940000] intel8x0_measure_ac97_clock: measured 52768 usecs
[17179589.940000] intel8x0: clocking to 47491
[17179589.940000] ivtv0: Autodetected Hauppauge WinTV PVR-250 card (cx23416 based)
[17179590.016000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[17179590.016000] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 217
[17179590.016000] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[17179590.072000] tveeprom 2-0050: Hauppauge model 32032, rev B182, serial# 2779409
[17179590.072000] tveeprom 2-0050: tuner model is LG TAPC H791F (idx 82, type 39)
[17179590.072000] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
[17179590.072000] tveeprom 2-0050: audio processor is MSP4448 (idx 27)
[17179590.072000] tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
[17179590.072000] tveeprom 2-0050: has no radio, has IR remote
[17179590.156000] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[17179590.472000] saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
[17179590.560000] eth0: link up.
[17179590.680000] msp3400 2-0040: MSP4448G-B3 found @ 0x80 (ivtv i2c driver #0)
[17179590.680000] msp3400 2-0040: MSP4448G-B3 supports radio, mode is autodetect and autoselect
[17179590.728000] NET: Registered protocol family 17
[17179591.396000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[17179591.612000] ivtv0: Encoder revision: 0x02060039
[17179591.612000] ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011, 0x02040024 or 0x02050032.
[17179591.612000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
[17179591.612000] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
[17179591.612000] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
[17179591.612000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
[17179591.612000] tuner 2-0061: type set to 39 (LG NTSC (newer TAPC series))
[17179591.672000] ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
[17179591.672000] ivtv:  ======================  NEXT CARD  ======================
[17179591.672000] ivtv1: Autodetected Hauppauge WinTV PVR-250 card (cx23416 based)
[17179591.672000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 177
[17179591.672000] ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
[17179591.744000] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
[17179592.032000] saa7115 3-0021: saa7115 found @ 0x42 (ivtv i2c driver #1)
[17179592.212000] msp3400 3-0040: MSP4448G-B3 found @ 0x80 (ivtv i2c driver #1)
[17179592.212000] msp3400 3-0040: MSP4448G-B3 supports radio, mode is autodetect and autoselect
[17179592.280000] tveeprom 3-0050: Hauppauge model 32032, rev B382, serial# 7260289
[17179592.280000] tveeprom 3-0050: tuner model is LG TAPC H791F (idx 82, type 39)
[17179592.280000] tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
[17179592.280000] tveeprom 3-0050: audio processor is MSP4448 (idx 27)
[17179592.280000] tveeprom 3-0050: decoder processor is SAA7115 (idx 19)
[17179592.280000] tveeprom 3-0050: has no radio, has IR remote
[17179592.968000] ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[17179593.184000] ivtv1: Encoder revision: 0x02060039
[17179593.184000] ivtv1 warning: Encoder Firmware can be buggy, use version 0x02040011, 0x02040024 or 0x02050032.
[17179593.184000] ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
[17179593.184000] ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
[17179593.184000] ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
[17179593.184000] ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
[17179593.184000] tuner 3-0061: type set to 39 (LG NTSC (newer TAPC series))
[17179593.244000] ivtv1: Initialized Hauppauge WinTV PVR-250, card #1
[17179593.244000] ivtv:  ======================  NEXT CARD  ======================
[17179593.244000] ivtv2: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
[17179593.244000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[17179593.244000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 225
[17179593.244000] ivtv2: Unreasonably low latency timer, setting to 64 (was 32)
[17179593.336000] tuner 4-0060: TEA5767 detected.
[17179593.336000] tuner 4-0060: chip found @ 0xc0 (ivtv i2c driver #2)
[17179593.336000] tuner 4-0060: type set to 62 (Philips TEA5767HN FM Radio)
[17179593.336000] tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #2)
[17179593.760000] tveeprom 4-0050: Hauppauge model 23552, rev D487, serial# 8743386
[17179593.760000] tveeprom 4-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type 70)
[17179593.760000] tveeprom 4-0050: TV standards NTSC(M) (eeprom 0x08)
[17179593.760000] tveeprom 4-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
[17179593.760000] tveeprom 4-0050: audio processor is CX25843 (idx 37)
[17179593.760000] tveeprom 4-0050: decoder processor is CX25843 (idx 30)
[17179593.760000] tveeprom 4-0050: has radio, has no IR remote
[17179593.760000] ivtv2: This is the first unit of a PVR500
[17179593.828000] cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2)
[17179594.944000] NET: Registered protocol family 10
[17179594.944000] lo: Disabled Privacy Extensions
[17179594.944000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[17179594.944000] IPv6 over IPv4 tunneling driver
[17179598.624000] cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[17179598.772000] wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #2)
[17179599.484000] ivtv2: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[17179599.700000] ivtv2: Encoder revision: 0x02060039
[17179599.700000] ivtv2 warning: Encoder Firmware can be buggy, use version 0x02040011, 0x02040024 or 0x02050032.
[17179599.700000] ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
[17179599.700000] ivtv2: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
[17179599.700000] ivtv2: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
[17179599.700000] ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
[17179599.700000] ivtv2: Create encoder radio stream
[17179599.700000] tuner 4-0061: type set to 70 (Samsung TCPN 2121P30A)
[17179599.864000] ivtv2: Initialized WinTV PVR 500 (unit #1), card #2
[17179599.864000] ivtv:  ======================  NEXT CARD  ======================
[17179599.864000] ivtv3: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
[17179599.864000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 209
[17179599.864000] ivtv3: Unreasonably low latency timer, setting to 64 (was 32)
[17179599.944000] tuner 5-0061: chip found @ 0xc2 (ivtv i2c driver #3)
[17179600.284000] cx25840 5-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #3)
[17179605.028000] cx25840 5-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[17179605.128000] wm8775 5-001b: chip found @ 0x36 (ivtv i2c driver #3)
[17179605.200000] tveeprom 5-0050: Hauppauge model 23552, rev D487, serial# 8743386
[17179605.200000] tveeprom 5-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type 70)
[17179605.200000] tveeprom 5-0050: TV standards NTSC(M) (eeprom 0x08)
[17179605.200000] tveeprom 5-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
[17179605.200000] tveeprom 5-0050: audio processor is CX25843 (idx 37)
[17179605.200000] tveeprom 5-0050: decoder processor is CX25843 (idx 30)
[17179605.200000] tveeprom 5-0050: has radio, has no IR remote
[17179605.200000] ivtv3: This is the second unit of a PVR500
[17179605.200000] ivtv3: Correcting tveeprom data: no radio present on second unit
[17179605.860000] eth0: no IPv6 routers present
[17179605.940000] ivtv3: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[17179606.156000] ivtv3: Encoder revision: 0x02060039
[17179606.156000] ivtv3 warning: Encoder Firmware can be buggy, use version 0x02040011, 0x02040024 or 0x02050032.
[17179606.156000] ivtv3: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
[17179606.156000] ivtv3: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
[17179606.156000] ivtv3: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
[17179606.156000] ivtv3: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
[17179606.156000] tuner 5-0061: type set to 70 (Samsung TCPN 2121P30A)
[17179606.320000] ivtv3: Initialized WinTV PVR 500 (unit #2), card #3
[17179606.320000] ivtv:  ====================  END INIT IVTV  ====================
[17179606.476000] lp0: using parport0 (interrupt-driven).
[17179606.496000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179606.496000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179606.528000] Adding 3028212k swap on /dev/disk/by-uuid/45e9e12a-b7bd-495f-af9d-6b65235cb0e4.  Priority:-1 extents:1 across:3028212k
[17179606.584000] EXT3 FS on hda1, internal journal
[17179611.152000] ACPI: Power Button (FF) [PWRF]
[17179611.152000] ACPI: Power Button (CM) [PWRB]
[17179611.252000] ibm_acpi: ec object not found
[17179611.284000] pcc_acpi: loading...
[17179613.620000] [drm] Initialized drm 1.0.1 20051102
[17179613.628000] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 217
[17179613.628000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[17179614.268000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179614.268000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[17179614.268000] agpgart: Putting AGP V3 device at 0000:04:00.0 into 4x mode
[17179614.432000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179614.432000] apm: overridden by ACPI.
[17179614.572000] [drm] Setting GART location based on new memory map
[17179614.572000] [drm] Loading R300 Microcode
[17179614.572000] [drm] writeback test succeeded in 1 usecs
[17179619.884000] Bluetooth: Core ver 2.8
[17179619.884000] NET: Registered protocol family 31
[17179619.884000] Bluetooth: HCI device and connection manager initialized
[17179619.884000] Bluetooth: HCI socket layer initialized
[17179619.920000] Bluetooth: L2CAP ver 2.8
[17179619.920000] Bluetooth: L2CAP socket layer initialized
[17179619.924000] Bluetooth: RFCOMM socket layer initialized
[17179619.924000] Bluetooth: RFCOMM TTY layer initialized
[17179619.924000] Bluetooth: RFCOMM ver 1.7