Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.23-0.1-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-05-26 17:02:05 -0400 Command line: root=/dev/sys/root resume=/dev/disk/by-id/ata-Maxtor_6L300S0_L61D18KG-part2 splash=silent vga=0x31a KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b000 (usable) BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.3 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0x7fff0 max_arch_pfn = 0x100000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 007fe00000 page 2M 007fe00000 - 007fff0000 page 4k kernel direct mapping tables up to 7fff0000 @ 10000-14000 last_map_addr: 7fff0000 end: 7fff0000 RAMDISK: 37940000 - 37fef0ce ACPI: RSDP 000F7530, 0014 (r0 Nvidia) ACPI: RSDT 7FFF3040, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 7FFF3180, 6264 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) ACPI: FACS 7FFF0000, 0040 ACPI: SSDT 7FFF9500, 00B5 (r1 PTLTD POWERNOW 1 LTP 1) ACPI: SRAT 7FFF9600, 0090 (r1 AMD HAMMER 1 AMD 1) ACPI: MCFG 7FFF9700, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: APIC 7FFF9440, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: Local APIC address 0xfee00000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-80000000 NUMA: Allocated memnodemap from 12000 - 13080 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-000000007fff0000 NODE_DATA [0000000000013080 - 000000000002b07f] bootmap [000000000002c000 - 000000000003bfff] pages 10 (7 early reservations) ==> bootmem [0000000000 - 007fff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000bc98b8] TEXT DATA BSS ==> [0000200000 - 0000bc98b8] #3 [0037940000 - 0037fef0ce] RAMDISK ==> [0037940000 - 0037fef0ce] #4 [000009b000 - 0000100000] BIOS reserved ==> [000009b000 - 0000100000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #6 [0000012000 - 0000013080] MEMNODEMAP ==> [0000012000 - 0000013080] found SMP MP-table at [ffff8800000f54b0] 000f54b0 [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009b 0: 0x00000100 -> 0x0007fff0 On node 0 totalpages: 524155 DMA zone: 1301 pages, LIFO batch:0 DMA32 zone: 512048 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) PERCPU: Allocating 61344 bytes of per cpu data NR_CPUS: 512, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 513349 Policy zone: DMA32 Kernel command line: root=/dev/sys/root resume=/dev/disk/by-id/ata-Maxtor_6L300S0_L61D18KG-part2 splash=silent vga=0x31a bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1813.462 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Node 0: aperture @ 280000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 2046476k/2097088k available (2699k kernel code, 50144k reserved, 3169k data, 788k init) CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay loop (skipped), value calculated using timer frequency.. 3626.92 BogoMIPS (lpj=7253848) kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved Security Framework initialized AppArmor: AppArmor initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 tseg: 0000000000 SMP alternatives: switching to UP code ACPI: Core revision 20080609 ACPI: Checking initramfs for custom DSDT Parsing all Control Methods: Table [DSDT](id 0001) - 980 Objects with 86 Devices 310 Methods 37 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 02 Using local APIC timer interrupts. APIC timer calibration result 12593476 Detected 12.593 MHz APIC timer. Brought up 1 CPUs Total of 1 processors activated (3626.92 BogoMIPS). CPU0 attaching NULL sched-domain. net_namespace: 1936 bytes NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 0000000080000000 aka 2048M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [feb00000, fec0ffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [80000000, fed3ffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [80000000, fcffffffff] bus: 00 index 2 mmio: [feb00000, fec0ffff] bus: 00 index 3 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access perfmon: version 2.82 perfmon: CPU hotplug support enabled evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-0957 [00] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9 ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:................................................................................................................................................. Initialized 33/37 Regions 9/9 Fields 35/35 Buffers 68/79 Packages (992 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:... Executed 3 _INI methods requiring 1 _STA executions (examined 91 objects) evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) HPET not enabled in BIOS. You might try hpet=force boot option PCI: 0000:00:01.1 reg 10 io port: [e400, e41f] PCI: 0000:00:01.1 reg 20 io port: [4c00, 4c3f] PCI: 0000:00:01.1 reg 24 io port: [4c40, 4c7f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled PCI: 0000:00:02.0 reg 10 32bit mmio: [cf004000, cf004fff] pci 0000:00:02.0: supports D1 pci 0000:00:02.0: supports D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled PCI: 0000:00:02.1 reg 10 32bit mmio: [feb00000, feb000ff] pci 0000:00:02.1: supports D1 pci 0000:00:02.1: supports D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled PCI: 0000:00:04.0 reg 10 io port: [dc00, dcff] PCI: 0000:00:04.0 reg 14 io port: [e000, e0ff] PCI: 0000:00:04.0 reg 18 32bit mmio: [cf003000, cf003fff] pci 0000:00:04.0: supports D1 pci 0000:00:04.0: supports D2 PCI: 0000:00:06.0 reg 20 io port: [f000, f00f] PCI: 0000:00:07.0 reg 10 io port: [9f0, 9f7] PCI: 0000:00:07.0 reg 14 io port: [bf0, bf3] PCI: 0000:00:07.0 reg 18 io port: [970, 977] PCI: 0000:00:07.0 reg 1c io port: [b70, b73] PCI: 0000:00:07.0 reg 20 io port: [d800, d80f] PCI: 0000:00:07.0 reg 24 32bit mmio: [cf002000, cf002fff] PCI: 0000:00:08.0 reg 10 io port: [9e0, 9e7] PCI: 0000:00:08.0 reg 14 io port: [be0, be3] PCI: 0000:00:08.0 reg 18 io port: [960, 967] PCI: 0000:00:08.0 reg 1c io port: [b60, b63] PCI: 0000:00:08.0 reg 20 io port: [c400, c40f] PCI: 0000:00:08.0 reg 24 32bit mmio: [cf001000, cf001fff] PCI: 0000:00:0a.0 reg 10 32bit mmio: [cf000000, cf000fff] PCI: 0000:00:0a.0 reg 14 io port: [b000, b007] pci 0000:00:0a.0: supports D1 pci 0000:00:0a.0: supports D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled PCI: 0000:05:06.0 reg 10 io port: [8000, 8007] PCI: 0000:05:06.0 reg 14 io port: [8400, 8403] PCI: 0000:05:06.0 reg 18 io port: [8800, 8807] PCI: 0000:05:06.0 reg 1c io port: [8c00, 8c03] PCI: 0000:05:06.0 reg 20 io port: [9000, 900f] PCI: 0000:05:06.0 reg 24 32bit mmio: [cb000000, cb0003ff] PCI: 0000:05:06.0 reg 30 32bit mmio: [ca000000, ca07ffff] pci 0000:05:06.0: supports D1 pci 0000:05:06.0: supports D2 PCI: 0000:05:07.0 reg 10 32bit mmio: [cb001000, cb001fff] pci 0000:05:07.0: supports D1 pci 0000:05:07.0: supports D2 pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot pci 0000:05:07.0: PME# disabled pci 0000:05:08.0: supports D1 pci 0000:05:08.0: supports D2 pci 0000:00:09.0: transparent bridge PCI: bridge 0000:00:09.0 io port: [8000, 9fff] PCI: bridge 0000:00:09.0 32bit mmio: [ca000000, cbffffff] PCI: bridge 0000:00:09.0 32bit mmio pref: [c0000000, c7ffffff] PCI: 0000:06:08.0 reg 10 32bit mmio: [c0000000, c3ffffff] PCI: 0000:06:09.0 reg 10 32bit mmio: [c4000000, c7ffffff] PCI: bridge 0000:05:08.0 io port: [1f000, ffffffffca000fff] PCI: bridge 0000:05:08.0 64bit mmio pref: [c0000000, c7ffffff] PCI: 0000:02:00.0 reg 10 64bit mmio: [c9004000, c900407f] PCI: 0000:02:00.0 reg 18 64bit mmio: [c9000000, c9003fff] PCI: 0000:02:00.0 reg 20 io port: [a000, a07f] PCI: 0000:02:00.0 reg 30 32bit mmio: [c8000000, c807ffff] pci 0000:02:00.0: supports D1 pci 0000:02:00.0: supports D2 Pre-1.1 PCIe device detected, disable ASPM for 0000:00:0d.0. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:0d.0 io port: [a000, afff] PCI: bridge 0000:00:0d.0 32bit mmio: [c8000000, c9ffffff] PCI: 0000:01:00.0 reg 10 32bit mmio: [cc000000, ccffffff] PCI: 0000:01:00.0 reg 14 64bit mmio: [b0000000, bfffffff] PCI: 0000:01:00.0 reg 1c 64bit mmio: [cd000000, cdffffff] PCI: 0000:01:00.0 reg 30 32bit mmio: [ce000000, ce01ffff] Pre-1.1 PCIe device detected, disable ASPM for 0000:00:0e.0. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:0e.0 32bit mmio: [cc000000, ceffffff] PCI: bridge 0000:00:0e.0 64bit mmio pref: [b0000000, bfffffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing pci 0000:05:08.0: BAR 7: can't allocate resource AppArmor: AppArmor Filesystem Enabled ACPI: RTC can wake from S4 system 00:01: ioport range 0x4000-0x407f has been reserved system 00:01: ioport range 0x4080-0x40ff has been reserved system 00:01: ioport range 0x4400-0x447f has been reserved system 00:01: ioport range 0x4480-0x44ff has been reserved system 00:01: ioport range 0x4800-0x487f has been reserved system 00:01: ioport range 0x4880-0x48ff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x805 has been reserved system 00:02: ioport range 0x290-0x297 has been reserved system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved system 00:0c: iomem range 0xf0000-0xf3fff could not be reserved system 00:0c: iomem range 0xf4000-0xf7fff could not be reserved system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved system 00:0c: iomem range 0xfc000-0xfffff could not be reserved system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved system 00:0c: iomem range 0xfff90000-0xfffbffff could not be reserved system 00:0c: iomem range 0xfffed000-0xfffeffff could not be reserved pci 0000:05:08.0: PCI bridge, secondary bus 0000:06 pci 0000:05:08.0: IO window: disabled pci 0000:05:08.0: MEM window: disabled pci 0000:05:08.0: PREFETCH window: 0x000000c0000000-0x000000c7ffffff pci 0000:00:09.0: PCI bridge, secondary bus 0000:05 pci 0000:00:09.0: IO window: 0x8000-0x9fff pci 0000:00:09.0: MEM window: 0xca000000-0xcbffffff pci 0000:00:09.0: PREFETCH window: 0x000000c0000000-0x000000c7ffffff pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: disabled pci 0000:00:0b.0: PREFETCH window: disabled pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: disabled pci 0000:00:0c.0: PREFETCH window: disabled pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0d.0: IO window: 0xa000-0xafff pci 0000:00:0d.0: MEM window: 0xc8000000-0xc9ffffff pci 0000:00:0d.0: PREFETCH window: disabled pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0e.0: IO window: disabled pci 0000:00:0e.0: MEM window: 0xcc000000-0xceffffff pci 0000:00:0e.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 05 index 0 io port: [8000, 9fff] bus: 05 index 1 mmio: [ca000000, cbffffff] bus: 05 index 2 mmio: [c0000000, c7ffffff] bus: 05 index 3 io port: [0, ffff] bus: 05 index 4 mmio: [0, ffffffffffffffff] bus: 06 index 0 mmio: [1f000, ffffffffca000fff] bus: 06 index 1 mmio: [0, 0] bus: 06 index 2 mmio: [c0000000, c7ffffff] bus: 06 index 3 mmio: [0, 0] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [0, 0] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [0, 0] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 02 index 0 io port: [a000, afff] bus: 02 index 1 mmio: [c8000000, c9ffffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 01 index 0 mmio: [0, 0] bus: 01 index 1 mmio: [cc000000, ceffffff] bus: 01 index 2 mmio: [b0000000, bfffffff] bus: 01 index 3 mmio: [0, 0] NET: Registered protocol family 2 Switched to high resolution mode on CPU 0 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 6844k freed audit: initializing netlink socket (disabled) type=2000 audit(1246287717.744:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1002 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) perfmon: added sampling format default pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Linking AER extended capability pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Linking AER extended capability pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Linking AER extended capability pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Linking AER extended capability pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:0b.0: setting latency timer to 64 pcieport-driver 0000:00:0b.0: found MSI capability pci_express 0000:00:0b.0:pcie00: allocate port service pci_express 0000:00:0b.0:pcie03: allocate port service pcieport-driver 0000:00:0c.0: setting latency timer to 64 pcieport-driver 0000:00:0c.0: found MSI capability pci_express 0000:00:0c.0:pcie00: allocate port service pci_express 0000:00:0c.0:pcie03: allocate port service pcieport-driver 0000:00:0d.0: setting latency timer to 64 pcieport-driver 0000:00:0d.0: found MSI capability pci_express 0000:00:0d.0:pcie00: allocate port service pci_express 0000:00:0d.0:pcie03: allocate port service pcieport-driver 0000:00:0e.0: setting latency timer to 64 pcieport-driver 0000:00:0e.0: found MSI capability pci_express 0000:00:0e.0:pcie00: allocate port service pci_express 0000:00:0e.0:pcie03: allocate port service vesafb: framebuffer at 0xb0000000, mapped to 0xffffc20010980000, using 10240k, total 131072k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 113709 bytes bootsplash: ...found (1280x1024, 43709 bytes, v3). Console: switching to colour frame buffer device 156x60 fb0: VESA VGA frame buffer device Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver8 ports, IRQ sharing disabled PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered registered taskstats version 1 Freeing unused kernel memory: 788k freed Write protecting the kernel read-only data: 4936k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 processor ACPI_CPU:00: registered as cooling_device0 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) ACPI: No dock devices found. SCSI subsystem initialized libata version 3.00 loaded. sata_nv 0000:00:07.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 sata_nv 0000:00:07.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133 ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133 ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:08.0: setting latency timer to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 22 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 22 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-7: Maxtor 6L300S0, BACE1G20, max UDMA/133 ata3.00: 586114704 sectors, multi 0: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133 ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA Maxtor 6L300S0 BACE PQ: 0 ANSI: 5 scsi 3:0:0:0: Direct-Access ATA WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5 pata_amd 0000:00:06.0: version 0.3.10 pata_amd 0000:00:06.0: setting latency timer to 64 scsi4 : pata_amd scsi5 : pata_amd ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 ata5.00: ATAPI: AOPEN DUW1608/ARR, A080, max UDMA/66 ata5: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc500c500) ACPI=0x1f01f (30:600:0x13) ata5.00: configured for UDMA/66 ata6.00: ATAPI: LITE-ON DVDRW SHM-165P6S, MS0N, max UDMA/66 ata6: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc500c500) ACPI=0x1f01f (30:600:0x13) ata6.00: limited to UDMA/33 due to 40-wire cable ata6.00: configured for UDMA/33 scsi 4:0:0:0: CD-ROM AOPEN DUW1608/ARR A080 PQ: 0 ANSI: 5 scsi 5:0:0:0: CD-ROM LITE-ON DVDRW SHM-165P6S MS0N PQ: 0 ANSI: 5 sata_sil24 0000:02:00.0: version 1.1 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 sata_sil24 0000:02:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 sata_sil24 0000:02:00.0: setting latency timer to 64 scsi6 : sata_sil24 scsi7 : sata_sil24 ata7: SATA max UDMA/100 host m128@0xc9004000 port 0xc9000000 irq 19 ata8: SATA max UDMA/100 host m128@0xc9004000 port 0xc9002000 irq 19 ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 0) ata7.00: ATA-7: Maxtor 6L300S0, BACE1G20, max UDMA/133 ata7.00: 586114704 sectors, multi 0: LBA48 NCQ (depth 31/32) ata7.00: configured for UDMA/100 ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0) ata8.00: ATA-7: Maxtor 7H500F0, HA431DN0, max UDMA/133 ata8.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata8.00: configured for UDMA/100 scsi 6:0:0:0: Direct-Access ATA Maxtor 6L300S0 BACE PQ: 0 ANSI: 5 scsi 7:0:0:0: Direct-Access ATA Maxtor 7H500F0 HA43 PQ: 0 ANSI: 5 Uniform Multi-Platform E-IDE driver fan PNP0C0B:00: registered as cooling_device1 ACPI: Fan [FAN] (on) md: raid1 personality registered for level 1 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com BIOS EDD facility v0.16 2004-Jun-25, 4 devices found udevd version 128 started usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500GB/465GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500GB/465GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.23-0.1-default ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 20, io mem 0xcf004000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 1-6: new high speed USB device using ehci_hcd and address 3 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.23-0.1-default ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 sda1 sd 0:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500GB/465GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500GB/465GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: [sdc] 586114704 512-byte hardware sectors: (300GB/279GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 586114704 512-byte hardware sectors: (300GB/279GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 sd 2:0:0:0: [sdc] Attached SCSI disk sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors: (500GB/465GiB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdd] 976773168 512-byte hardware sectors: (500GB/465GiB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 usb 1-6: configuration #1 chosen from 1 choice usb 1-6: New USB device found, idVendor=10df, idProduct=0500 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: Manufacturer: USB2.0 usb 1-6: SerialNumber: 0410000006A9 sd 3:0:0:0: [sdd] Attached SCSI disk sd 6:0:0:0: [sde] 586114704 512-byte hardware sectors: (300GB/279GiB) sd 6:0:0:0: [sde] Write Protect is off sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:0:0: [sde] 586114704 512-byte hardware sectors: (300GB/279GiB) sd 6:0:0:0: [sde] Write Protect is off sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sde1 sde2 sde3 sd 6:0:0:0: [sde] Attached SCSI disk sd 7:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500GB/465GiB) sd 7:0:0:0: [sdf] Write Protect is off sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 7:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 7:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500GB/465GiB) sd 7:0:0:0: [sdf] Write Protect is off sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 7:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 usb 2-2: new full speed USB device using ohci_hcd and address 2 sd 7:0:0:0: [sdf] Attached SCSI disk usb 2-2: configuration #1 chosen from 1 choice usb 2-2: New USB device found, idVendor=067b, idProduct=2303 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: USB-Serial Controller usb 2-2: Manufacturer: Prolific Technology Inc. md: raid0 personality registered for level 0 xor: automatically using best checksumming function: generic_sse generic_sse: 5551.000 MB/sec xor: using function: generic_sse (5551.000 MB/sec) async_tx: api initialized (async) raid6: int64x1 1651 MB/s raid6: int64x2 1958 MB/s raid6: int64x4 1715 MB/s raid6: int64x8 1507 MB/s raid6: sse2x1 410 MB/s raid6: sse2x2 805 MB/s raid6: sse2x4 1078 MB/s raid6: using algorithm sse2x4 (1078 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: md1 stopped. md: bind md: bind raid1: raid set md1 active with 2 out of 2 mirrors md: linear personality registered for level -1 PM: Starting manual resume from disk REISERFS (device dm-0): found reiserfs format "3.6" with standard journal REISERFS (device dm-0): using ordered data mode reiserfs: using flush barriers REISERFS (device dm-0): journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-0): checking transaction log (dm-0) REISERFS (device dm-0): Using r5 hash to sort names udevd version 128 started sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:0: Attached scsi generic sg3 type 0 scsi 4:0:0:0: Attached scsi generic sg4 type 5 scsi 5:0:0:0: Attached scsi generic sg5 type 5 sd 6:0:0:0: Attached scsi generic sg6 type 0 sd 7:0:0:0: Attached scsi generic sg7 type 0 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 forcedeth 0000:00:0a.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray sr 5:0:0:0: Attached scsi CD-ROM sr1 usbcore: registered new interface driver usbserial usbserial: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 9, addr 00:15:f2:ad:0a:93 forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 nvidia 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.14 Wed May 27 01:23:47 PDT 2009 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 usbserial: USB Serial support registered for pl2303 pl2303 2-2:1.0: pl2303 converter detected ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ACPI: Power Button (CM) [PWRB] usb 2-2: pl2303 converter now attached to ttyUSB0 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver input: PC Speaker as /devices/platform/pcspkr/input/input4 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 sata_sil 0000:05:06.0: version 2.3 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 vendor=10de device=005c sata_sil 0000:05:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 sata_sil 0000:05:06.0: Applying R_ERR on DMA activate FIS errata fix scsi8 : sata_sil scsi9 : sata_sil IT8712 SuperIO detected. parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] scsi10 : sata_sil scsi11 : sata_sil ata9: SATA max UDMA/100 mmio m1024@0xcb000000 tf 0xcb000080 irq 16 ata10: SATA max UDMA/100 mmio m1024@0xcb000000 tf 0xcb0000c0 irq 16 ata11: SATA max UDMA/100 mmio m1024@0xcb000000 tf 0xcb000280 irq 16 ata12: SATA max UDMA/100 mmio m1024@0xcb000000 tf 0xcb0002c0 irq 16 Initializing USB Mass Storage driver... scsi12 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning ppdev: user-space parallel port driver ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata9.00: ATA-8: WDC WD10EACS-22D6B0, 01.01A01, max UDMA/133 ata9.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata9.00: configured for UDMA/100 ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 310) scsi 12:0:0:0: Direct-Access USB2.0 HS-CF 1.64 PQ: 0 ANSI: 0 sd 12:0:0:0: [sdg] Attached SCSI removable disk sd 12:0:0:0: Attached scsi generic sg8 type 0 scsi 12:0:0:1: Direct-Access USB2.0 HS-MS 1.64 PQ: 0 ANSI: 0 sd 12:0:0:1: [sdh] Attached SCSI removable disk sd 12:0:0:1: Attached scsi generic sg9 type 0 scsi 12:0:0:2: Direct-Access USB2.0 HS-SM 1.64 PQ: 0 ANSI: 0 sd 12:0:0:2: [sdi] Attached SCSI removable disk sd 12:0:0:2: Attached scsi generic sg10 type 0 scsi 12:0:0:3: Direct-Access USB2.0 HS-SD/MMC 1.64 PQ: 0 ANSI: 0 sd 12:0:0:3: [sdj] Attached SCSI removable disk sd 12:0:0:3: Attached scsi generic sg11 type 0 ata10.00: ATA-8: WDC WD10EACS-22D6B0, 01.01A01, max UDMA/133 ata10.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) usb-storage: device scan complete ata10.00: configured for UDMA/100 ata11: SATA link down (SStatus 0 SControl 310) ata12: SATA link down (SStatus 0 SControl 310) scsi 8:0:0:0: Direct-Access ATA WDC WD10EACS-22D 01.0 PQ: 0 ANSI: 5 sd 8:0:0:0: [sdk] 1953525168 512-byte hardware sectors: (1000GB/931GiB) sd 8:0:0:0: [sdk] Write Protect is off sd 8:0:0:0: [sdk] Mode Sense: 00 3a 00 00 sd 8:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 8:0:0:0: [sdk] 1953525168 512-byte hardware sectors: (1000GB/931GiB) sd 8:0:0:0: [sdk] Write Protect is off sd 8:0:0:0: [sdk] Mode Sense: 00 3a 00 00 sd 8:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdk: sdk1 sdk2 sd 8:0:0:0: [sdk] Attached SCSI disk sd 8:0:0:0: Attached scsi generic sg12 type 0 scsi 9:0:0:0: Direct-Access ATA WDC WD10EACS-22D 01.0 PQ: 0 ANSI: 5 sd 9:0:0:0: [sdl] 1953525168 512-byte hardware sectors: (1000GB/931GiB) sd 9:0:0:0: [sdl] Write Protect is off sd 9:0:0:0: [sdl] Mode Sense: 00 3a 00 00 sd 9:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 9:0:0:0: [sdl] 1953525168 512-byte hardware sectors: (1000GB/931GiB) sd 9:0:0:0: [sdl] Write Protect is off sd 9:0:0:0: [sdl] Mode Sense: 00 3a 00 00 sd 9:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdl: sdl1 sdl2 sd 9:0:0:0: [sdl] Attached SCSI disk sd 9:0:0:0: Attached scsi generic sg13 type 0 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22 Intel ICH 0000:00:04.0: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 54647 usecs intel8x0: clocking to 46980 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 vendor=10de device=005c ohci1394 0000:05:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[cb001000-cb0017ff] Max Packet=[2048] IR/IT contexts=[8/8] Linux video capture interface: v2.00 ivtv: Start initialization, version 1.4.1 ivtv0: Initializing card 0 ivtv0: Autodetected Hauppauge card (cx23416 based) vendor=10de device=005c ivtv 0000:06:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 2-0050: Hauppauge model 23552, rev E787, serial# 9926090 tveeprom 2-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type 70) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio ivtv0: Autodetected WinTV PVR 500 (unit #1) cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0) tea5767 2-0060: type set to Philips TEA5767HN FM Radio tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) tuner-simple 2-0061: creating new instance tuner-simple 2-0061: type set to 70 (Samsung TCPN 2121P30A) ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Initialized card: WinTV PVR 500 (unit #1) ivtv1: Initializing card 1 ivtv1: Autodetected Hauppauge card (cx23416 based) vendor=10de device=005c ivtv 0000:06:09.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 ivtv1: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 3-0050: Hauppauge model 23552, rev E787, serial# 9926090 tveeprom 3-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type 70) tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 3-0050: audio processor is CX25843 (idx 37) tveeprom 3-0050: decoder processor is CX25843 (idx 30) tveeprom 3-0050: has radio ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: Autodetected WinTV PVR 500 (unit #2) cx25840 3-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1) tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1) tuner-simple 3-0061: creating new instance tuner-simple 3-0061: type set to 70 (Samsung TCPN 2121P30A) ivtv1: Registered device video1 for encoder MPG (4096 kB) ivtv1: Registered device video33 for encoder YUV (2048 kB) ivtv1: Registered device vbi1 for encoder VBI (1024 kB) ivtv1: Registered device video25 for encoder PCM (320 kB) ivtv1: Initialized card: WinTV PVR 500 (unit #2) ivtv: End initialization ieee1394: Host added: ID:BUS[0-00:1023] GUID[0001ef0900000000] Unable to find swap-space signature Adding 2097144k swap on /dev/mapper/sys-swap. Priority:-1 extents:1 across:2097144k md: md0 stopped. md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors md: md2 stopped. md: bind md: bind md: bind md: bind md: bind md: bind raid5: device sdd1 operational as raid disk 0 raid5: device sdl1 operational as raid disk 4 raid5: device sdf1 operational as raid disk 3 raid5: device sdb1 operational as raid disk 2 raid5: device sda1 operational as raid disk 1 raid5: allocated 5342kB for md2 raid5: raid level 5 set md2 active with 5 out of 5 devices, algorithm 2 RAID5 conf printout: --- rd:5 wd:5 disk 0, o:1, dev:sdd1 disk 1, o:1, dev:sda1 disk 2, o:1, dev:sdb1 disk 3, o:1, dev:sdf1 disk 4, o:1, dev:sdl1 md: md3 stopped. md: bind md: bind raid1: raid set md3 active with 2 out of 2 mirrors loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. REISERFS (device dm-3): found reiserfs format "3.6" with standard journal REISERFS (device dm-3): using ordered data mode reiserfs: using flush barriers REISERFS (device dm-3): journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-3): checking transaction log (dm-3) REISERFS (device dm-3): Using r5 hash to sort names REISERFS (device dm-1): found reiserfs format "3.6" with standard journal REISERFS (device dm-1): using ordered data mode reiserfs: using flush barriers REISERFS (device dm-1): journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-1): checking transaction log (dm-1) REISERFS (device dm-1): Using r5 hash to sort names REISERFS (device dm-14): found reiserfs format "3.6" with standard journal REISERFS (device dm-14): using ordered data mode reiserfs: using flush barriers REISERFS (device dm-14): journal params: device dm-14, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-14): checking transaction log (dm-14) reiserfs: disabling flush barriers on dm-14 REISERFS (device dm-14): Using r5 hash to sort names REISERFS (device dm-15): found reiserfs format "3.6" with standard journal REISERFS (device dm-15): using ordered data mode reiserfs: using flush barriers REISERFS (device dm-15): journal params: device dm-15, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-15): checking transaction log (dm-15) reiserfs: disabling flush barriers on dm-15 REISERFS (device dm-15): Using r5 hash to sort names REISERFS (device dm-6): found reiserfs format "3.6" with standard journal REISERFS (device dm-6): using ordered data mode reiserfs: using flush barriers REISERFS (device dm-6): journal params: device dm-6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-6): checking transaction log (dm-6) REISERFS (device dm-6): Using r5 hash to sort names SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem Filesystem "dm-9": Disabling barriers, trial barrier write failed XFS mounting filesystem dm-9 Ending clean XFS mount for filesystem: dm-9 Filesystem "dm-10": Disabling barriers, trial barrier write failed XFS mounting filesystem dm-10 Ending clean XFS mount for filesystem: dm-10 Filesystem "dm-11": Disabling barriers, trial barrier write failed XFS mounting filesystem dm-11 Ending clean XFS mount for filesystem: dm-11 REISERFS (device dm-12): found reiserfs format "3.6" with standard journal REISERFS (device dm-12): using ordered data mode reiserfs: using flush barriers REISERFS (device dm-12): journal params: device dm-12, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-12): checking transaction log (dm-12) reiserfs: disabling flush barriers on dm-12 REISERFS (device dm-12): Using r5 hash to sort names REISERFS (device dm-2): found reiserfs format "3.6" with standard journal REISERFS (device dm-2): using ordered data mode reiserfs: using flush barriers REISERFS (device dm-2): journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-2): checking transaction log (dm-2) REISERFS (device dm-2): Using r5 hash to sort names REISERFS (device dm-4): found reiserfs format "3.6" with standard journal REISERFS (device dm-4): using ordered data mode reiserfs: using flush barriers REISERFS (device dm-4): journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device dm-4): checking transaction log (dm-4) REISERFS (device dm-4): Using r5 hash to sort names ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A fuse init (API version 7.9) type=1505 audit(1246305763.515:2): operation="profile_load" name="/bin/ping" name2="default" pid=2577 type=1505 audit(1246305763.907:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=2578 type=1505 audit(1246305763.983:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=2579 type=1505 audit(1246305764.063:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=2580 type=1505 audit(1246305764.139:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=2581 type=1505 audit(1246305764.211:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=2582 type=1505 audit(1246305764.283:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=2583 type=1505 audit(1246305764.431:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=2584 type=1505 audit(1246305764.543:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=2585 type=1505 audit(1246305764.623:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=2586 Adding 2007992k swap on /dev/md3. Priority:-2 extents:1 across:2007992k powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 Clocksource tsc unstable (delta = -222228679 ns) NET: Registered protocol family 10 lo: Disabled Privacy Extensions firmware: requesting v4l-cx2341x-enc.fw firmware: requesting v4l-cx2341x-enc.fw ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Encoder revision: 0x02060039 firmware: requesting v4l-cx25840.fw ivtv0: Encoder revision: 0x02060039 firmware: requesting v4l-cx25840.fw cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes) cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) eth0: no IPv6 routers present tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky it87: Found IT8712F chip at 0x290, revision 7 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region IP__ [0x295-0x296] ACPI: Device needs an ACPI driver NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 1 processor cores. vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 2.0.6_OSE (interface 0x00090000). /dev/vmmon[4802]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[4802]: Initial HV check: anyNotCapable=1 anyUnlocked=0 anyEnabled=0 anyDisabled=0 /dev/vmmon[4802]: Module vmmon: initialized /dev/vmci[4814]: VMCI: Driver initialized. /dev/vmci[4814]: Module vmci: registered with major=10 minor=58 /dev/vmci[4814]: Module vmci: initialized /dev/vmnet: open called by PID 4857 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: up bridge-eth0: attached /dev/vmnet: open called by PID 4868 (vmnet-dhcpd) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 4898 (vmnet-dhcpd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 4903 (vmnet-natd) /dev/vmnet: port on hub 8 successfully opened process `upsagentd' is using obsolete setsockopt SO_BSDCOMPAT /dev/vmnet: open called by PID 5363 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 5366 (vmnet-netifup) /dev/vmnet: port on hub 1 successfully opened vmnet1: no IPv6 routers present vmnet8: no IPv6 routers present ivtv1: DMA TIMEOUT 00000001 0 ivtv1: DMA TIMEOUT 00000001 0 ivtv1: DMA TIMEOUT 00000001 0 ivtv1: DMA TIMEOUT 00000001 0 ivtv1: DMA TIMEOUT 00000001 0 ivtv1: DMA TIMEOUT 00000001 0 ivtv1: DMA TIMEOUT 00000001 0 ivtv1: DMA TIMEOUT 00000001 0 ivtv1: DMA TIMEOUT 00000001 0