07/16/2008 17:13:55  QAM Cache is disabled
07/16/2008 17:13:55  Channel is open (ver 3.0.1)
07/16/2008 17:13:55  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to load scan data for tuner.
07/16/2008 17:13:55  DVB-S Frequency initialize :0
07/16/2008 17:13:55  TSSplitter ver 1.59
07/16/2008 17:13:55  ptsfix is enabled by default.
07/16/2008 17:13:55  'Hauppauge WinTV 88x TS Capture.par' is not exist.

07/16/2008 17:13:55  Set parser delay time 500 on 'Hauppauge WinTV 88x TS Capture'.

07/16/2008 17:14:22  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:14:22  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:14:22  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:14:22  sat_no:0
07/16/2008 17:14:22  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:14:22  lnb:11300-11300-11300 pos:' ' opt:' '
07/16/2008 17:14:22  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:' ' opt:' '.
07/16/2008 17:14:22  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:14:35  Parser stopped, processed pkt:0 
07/16/2008 17:15:04  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:15:04  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:15:04  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:15:04  sat_no:0
07/16/2008 17:15:04  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:15:04  lnb:11300-11300-11300 pos:' ' opt:' '
07/16/2008 17:15:04  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:' ' opt:' '.
07/16/2008 17:15:04  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:15:04  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 17:15:04   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 17:15:04  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 17:15:04  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 17:15:04  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 17:15:04  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 17:15:04  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 17:15:04  Scan returns (null)
07/16/2008 17:15:04  DVB set channel (0) 0--1--1 'Hauppauge WinTV 88x TS Capture-0'. <<=======
07/16/2008 17:15:04  Select output format:1
07/16/2008 17:15:04  Parser stopped, processed pkt:0 
07/16/2008 17:15:04  DVB:Get tuning Entry :(type:1) major:-1  minor:-1  physical:0 (index:-1)
07/16/2008 17:15:04  DVB: DVB-S Tuning Entry not found.
07/16/2008 17:15:04  Invalid tuning for Tuning DVB-S tune '0'.
07/16/2008 17:15:17  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:15:17  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:15:17  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:15:17  sat_no:0
07/16/2008 17:15:17  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:15:17  lnb:11300-11300-11300 pos:' ' opt:' '
07/16/2008 17:15:17  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:' ' opt:' '.
07/16/2008 17:15:17  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:15:17  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 17:15:17   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 17:15:17  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 17:15:17  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 17:15:17  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 17:15:17  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 17:15:17  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 17:15:17  Scan returns (null)
07/16/2008 17:15:17  Parser stopped, processed pkt:0 
07/16/2008 17:15:17  DiSEqc: Vol:8 Loc:HiBand Pos:A Opt:A 
07/16/2008 17:15:17  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 17:15:17  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 17:15:22  Sucessful Changing DVB-S tune request for freq 12456 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 17:15:22  UnmapPID TIF Pin total:4 

07/16/2008 17:15:25  DVB-S tuning not locked.
07/16/2008 17:15:25  Scan returns (null)
07/16/2008 17:15:26  Parser stopped, processed pkt:0 
07/16/2008 17:15:26  DiSEqc: Vol:8 Loc:HiBand Pos:A Opt:A 
07/16/2008 17:15:26  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 17:15:26  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 17:15:31  Sucessful Changing DVB-S tune request for freq 12483 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 17:15:31  UnmapPID TIF Pin total:4 

07/16/2008 17:15:34  DVB-S tuning not locked.
07/16/2008 17:15:34  Scan returns (null)
07/16/2008 17:15:35  End of scan data (2)
07/16/2008 17:15:35  Scan returns DONE
07/16/2008 17:15:35  Scan returns DONE
07/16/2008 17:15:35  Parser stopped, processed pkt:0 
07/16/2008 17:17:09  Channel closed.
07/16/2008 17:50:20  QAM Cache is disabled
07/16/2008 17:50:20  Channel is open (ver 3.0.1)
07/16/2008 17:50:20  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to load scan data for tuner.
07/16/2008 17:50:20  DVB-S Frequency initialize :0
07/16/2008 17:50:20  TSSplitter ver 1.59
07/16/2008 17:50:20  ptsfix is enabled by default.
07/16/2008 17:50:20  'Hauppauge WinTV 88x TS Capture.par' is not exist.

07/16/2008 17:50:20  Set parser delay time 500 on 'Hauppauge WinTV 88x TS Capture'.

07/16/2008 17:50:43  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:50:43  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:50:43  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:50:43  sat_no:0
07/16/2008 17:50:43  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:50:43  lnb:11300-11300-11300 pos:'N' opt:'N'
07/16/2008 17:50:43  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:'N' opt:'N'.
07/16/2008 17:50:43  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:50:53  Parser stopped, processed pkt:0 
07/16/2008 17:51:12  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:51:12  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:51:12  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:51:12  sat_no:0
07/16/2008 17:51:12  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:51:12  lnb:11300-11300-11300 pos:' ' opt:' '
07/16/2008 17:51:12  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:' ' opt:' '.
07/16/2008 17:51:12  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:51:12  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 17:51:12   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 17:51:12  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 17:51:12  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 17:51:12  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 17:51:12  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 17:51:12  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 17:51:12  Scan returns (null)
07/16/2008 17:51:13  DVB set channel (0) 0--1--1 'Hauppauge WinTV 88x TS Capture-0'. <<=======
07/16/2008 17:51:13  Select output format:1
07/16/2008 17:51:13  Parser stopped, processed pkt:0 
07/16/2008 17:51:13  DVB:Get tuning Entry :(type:1) major:-1  minor:-1  physical:0 (index:-1)
07/16/2008 17:51:13  DVB: DVB-S Tuning Entry not found.
07/16/2008 17:51:13  Invalid tuning for Tuning DVB-S tune '0'.
07/16/2008 17:51:26  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:51:26  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:51:26  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:51:26  sat_no:0
07/16/2008 17:51:26  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:51:26  lnb:11300-11300-11300 pos:' ' opt:' '
07/16/2008 17:51:26  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:' ' opt:' '.
07/16/2008 17:51:26  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:51:26  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 17:51:26   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 17:51:26  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 17:51:26  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 17:51:26  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 17:51:26  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 17:51:26  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 17:51:26  Scan returns (null)
07/16/2008 17:51:26  Parser stopped, processed pkt:0 
07/16/2008 17:51:26  DiSEqc: Vol:8 Loc:HiBand Pos:A Opt:A 
07/16/2008 17:51:26  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 17:51:26  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 17:51:31  Sucessful Changing DVB-S tune request for freq 12456 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 17:51:31  UnmapPID TIF Pin total:4 

07/16/2008 17:51:35  DVB-S tuning not locked.
07/16/2008 17:51:35  Scan returns (null)
07/16/2008 17:51:35  Parser stopped, processed pkt:0 
07/16/2008 17:51:35  DiSEqc: Vol:8 Loc:HiBand Pos:A Opt:A 
07/16/2008 17:51:35  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 17:51:35  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 17:51:40  Sucessful Changing DVB-S tune request for freq 12483 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 17:51:40  UnmapPID TIF Pin total:4 

07/16/2008 17:51:43  DVB-S tuning not locked.
07/16/2008 17:51:43  Scan returns (null)
07/16/2008 17:51:44  End of scan data (2)
07/16/2008 17:51:44  Scan returns DONE
07/16/2008 17:51:44  Scan returns DONE
07/16/2008 17:51:44  Parser stopped, processed pkt:0 
07/16/2008 17:51:59  Channel closed.
07/16/2008 17:53:53  QAM Cache is disabled
07/16/2008 17:53:53  Channel is open (ver 3.0.1)
07/16/2008 17:53:53  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to load scan data for tuner.
07/16/2008 17:53:53  DVB-S Frequency initialize :0
07/16/2008 17:53:53  TSSplitter ver 1.59
07/16/2008 17:53:53  ptsfix is enabled by default.
07/16/2008 17:53:53  'Hauppauge WinTV 88x TS Capture.par' is not exist.

07/16/2008 17:53:53  Set parser delay time 500 on 'Hauppauge WinTV 88x TS Capture'.

07/16/2008 17:54:53  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:54:53  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:54:53  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:54:53  sat_no:0
07/16/2008 17:54:53  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:54:53  lnb:11300-11300-11300 pos:'A' opt:'A'
07/16/2008 17:54:53  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:'A' opt:'A'.
07/16/2008 17:54:53  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:54:53  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 17:54:53   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 17:54:53  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 17:54:53  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 17:54:53  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 17:54:53  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 17:54:53  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 17:54:53  Scan returns (null)
07/16/2008 17:54:53  DVB set channel (0) 0--1--1 'Hauppauge WinTV 88x TS Capture-0'. <<=======
07/16/2008 17:54:53  Select output format:1
07/16/2008 17:54:53  Parser stopped, processed pkt:0 
07/16/2008 17:54:53  DVB:Get tuning Entry :(type:1) major:-1  minor:-1  physical:0 (index:-1)
07/16/2008 17:54:53  DVB: DVB-S Tuning Entry not found.
07/16/2008 17:54:53  Invalid tuning for Tuning DVB-S tune '0'.
07/16/2008 17:55:05  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:55:05  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:55:05  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:55:05  sat_no:0
07/16/2008 17:55:05  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:55:05  lnb:11300-11300-11300 pos:'A' opt:'A'
07/16/2008 17:55:05  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:'A' opt:'A'.
07/16/2008 17:55:05  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:55:05  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 17:55:05   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 17:55:05  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 17:55:05  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 17:55:05  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 17:55:05  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 17:55:05  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 17:55:05  Scan returns (null)
07/16/2008 17:55:06  Parser stopped, processed pkt:0 
07/16/2008 17:55:06  DiSEqc: Vol:8 Loc:HiBand Pos:A Opt:A 
07/16/2008 17:55:06  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 17:55:06  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 17:55:11  Sucessful Changing DVB-S tune request for freq 12456 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 17:55:11  UnmapPID TIF Pin total:4 

07/16/2008 17:55:14  DVB-S tuning not locked.
07/16/2008 17:55:14  Scan returns (null)
07/16/2008 17:55:15  Parser stopped, processed pkt:0 
07/16/2008 17:55:15  DiSEqc: Vol:8 Loc:HiBand Pos:A Opt:A 
07/16/2008 17:55:15  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 17:55:15  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 17:55:19  Sucessful Changing DVB-S tune request for freq 12483 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 17:55:19  UnmapPID TIF Pin total:4 

07/16/2008 17:55:23  DVB-S tuning not locked.
07/16/2008 17:55:23  Scan returns (null)
07/16/2008 17:55:23  End of scan data (2)
07/16/2008 17:55:23  Scan returns DONE
07/16/2008 17:55:23  Scan returns DONE
07/16/2008 17:55:23  Parser stopped, processed pkt:0 
07/16/2008 17:56:49  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:56:49  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:56:49  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:56:49  sat_no:0
07/16/2008 17:56:49  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:56:49  lnb:11300-11300-11300 pos:'A' opt:'B'
07/16/2008 17:56:49  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:'A' opt:'B'.
07/16/2008 17:56:49  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:56:49  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 17:56:49   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 17:56:49  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 17:56:49  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 17:56:49  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 17:56:49  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 17:56:49  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 17:56:49  Scan returns (null)
07/16/2008 17:56:49  DVB set channel (0) 0--1--1 'Hauppauge WinTV 88x TS Capture-0'. <<=======
07/16/2008 17:56:49  Select output format:1
07/16/2008 17:56:49  Parser stopped, processed pkt:0 
07/16/2008 17:56:49  DVB:Get tuning Entry :(type:1) major:-1  minor:-1  physical:0 (index:-1)
07/16/2008 17:56:49  DVB: DVB-S Tuning Entry not found.
07/16/2008 17:56:49  Invalid tuning for Tuning DVB-S tune '0'.
07/16/2008 17:57:01  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:57:01  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:57:01  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:57:01  sat_no:0
07/16/2008 17:57:01  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:57:01  lnb:11300-11300-11300 pos:'A' opt:'B'
07/16/2008 17:57:01  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:'A' opt:'B'.
07/16/2008 17:57:01  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:57:01  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 17:57:01   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 17:57:01  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 17:57:01  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 17:57:01  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 17:57:01  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 17:57:01  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 17:57:01  Scan returns (null)
07/16/2008 17:57:01  Parser stopped, processed pkt:0 
07/16/2008 17:57:01  DiSEqc: Vol:8 Loc:HiBand Pos:A Opt:B 
07/16/2008 17:57:01  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 17:57:01  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 17:57:06  Sucessful Changing DVB-S tune request for freq 12456 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 17:57:06  UnmapPID TIF Pin total:4 

07/16/2008 17:57:10  DVB-S tuning not locked.
07/16/2008 17:57:10  Scan returns (null)
07/16/2008 17:57:10  Parser stopped, processed pkt:0 
07/16/2008 17:57:10  DiSEqc: Vol:8 Loc:HiBand Pos:A Opt:B 
07/16/2008 17:57:10  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 17:57:10  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 17:57:15  Sucessful Changing DVB-S tune request for freq 12483 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 17:57:15  UnmapPID TIF Pin total:4 

07/16/2008 17:57:19  DVB-S tuning not locked.
07/16/2008 17:57:19  Scan returns (null)
07/16/2008 17:57:19  End of scan data (2)
07/16/2008 17:57:19  Scan returns DONE
07/16/2008 17:57:19  Scan returns DONE
07/16/2008 17:57:19  Parser stopped, processed pkt:0 
07/16/2008 17:59:30  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:59:30  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:59:30  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:59:30  sat_no:0
07/16/2008 17:59:30  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:59:30  lnb:11300-11300-11300 pos:'A' opt:'B'
07/16/2008 17:59:30  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:'A' opt:'B'.
07/16/2008 17:59:30  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:59:30  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 17:59:30   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 17:59:30  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 17:59:30  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 17:59:30  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 17:59:30  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 17:59:30  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 17:59:30  Scan returns (null)
07/16/2008 17:59:30  DVB set channel (0) 0--1--1 'Hauppauge WinTV 88x TS Capture-0'. <<=======
07/16/2008 17:59:30  Select output format:1
07/16/2008 17:59:30  Parser stopped, processed pkt:0 
07/16/2008 17:59:30  DVB:Get tuning Entry :(type:1) major:-1  minor:-1  physical:0 (index:-1)
07/16/2008 17:59:30  DVB: DVB-S Tuning Entry not found.
07/16/2008 17:59:30  Invalid tuning for Tuning DVB-S tune '0'.
07/16/2008 17:59:42  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:59:42  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:59:42  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:59:42  sat_no:0
07/16/2008 17:59:42  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:59:42  lnb:11300-11300-11300 pos:'A' opt:'B'
07/16/2008 17:59:42  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:'A' opt:'B'.
07/16/2008 17:59:42  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:59:42  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 17:59:42   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 17:59:42  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 17:59:42  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 17:59:42  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 17:59:42  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 17:59:42  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 17:59:42  Scan returns (null)
07/16/2008 17:59:42  Parser stopped, processed pkt:0 
07/16/2008 17:59:42  DiSEqc: Vol:8 Loc:HiBand Pos:A Opt:B 
07/16/2008 17:59:43  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 17:59:43  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 17:59:47  Sucessful Changing DVB-S tune request for freq 12456 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 17:59:47  UnmapPID TIF Pin total:4 

07/16/2008 17:59:51  DVB-S tuning not locked.
07/16/2008 17:59:51  Scan returns (null)
07/16/2008 17:59:51  Parser stopped, processed pkt:0 
07/16/2008 17:59:51  DiSEqc: Vol:8 Loc:HiBand Pos:A Opt:B 
07/16/2008 17:59:52  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 17:59:52  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 17:59:56  Sucessful Changing DVB-S tune request for freq 12483 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 17:59:56  UnmapPID TIF Pin total:4 

07/16/2008 18:00:00  DVB-S tuning not locked.
07/16/2008 18:00:00  Scan returns (null)
07/16/2008 18:00:00  End of scan data (2)
07/16/2008 18:00:00  Scan returns DONE
07/16/2008 18:00:00  Scan returns DONE
07/16/2008 18:00:00  Parser stopped, processed pkt:0 
07/16/2008 18:23:53  Parser stopped, processed pkt:0 
07/16/2008 18:24:28  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 18:24:28  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 18:24:28  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 18:24:28  sat_no:0
07/16/2008 18:24:28  sat_name:OPTUS D1 (160.0 E)
07/16/2008 18:24:28  lnb:11300-11300-11300 pos:'B' opt:'A'
07/16/2008 18:24:28  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:'B' opt:'A'.
07/16/2008 18:24:28  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 18:24:28  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 18:24:28   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 18:24:28  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 18:24:28  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 18:24:28  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 18:24:28  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 18:24:28  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 18:24:28  Scan returns (null)
07/16/2008 18:24:28  DVB set channel (0) 0--1--1 'Hauppauge WinTV 88x TS Capture-0'. <<=======
07/16/2008 18:24:28  Select output format:1
07/16/2008 18:24:28  Parser stopped, processed pkt:0 
07/16/2008 18:24:28  DVB:Get tuning Entry :(type:1) major:-1  minor:-1  physical:0 (index:-1)
07/16/2008 18:24:28  DVB: DVB-S Tuning Entry not found.
07/16/2008 18:24:28  Invalid tuning for Tuning DVB-S tune '0'.
07/16/2008 18:24:41  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 18:24:41  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 18:24:41  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 18:24:41  sat_no:0
07/16/2008 18:24:41  sat_name:OPTUS D1 (160.0 E)
07/16/2008 18:24:41  lnb:11300-11300-11300 pos:'B' opt:'A'
07/16/2008 18:24:41  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:'B' opt:'A'.
07/16/2008 18:24:41  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 18:24:41  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 18:24:41   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 18:24:41  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 18:24:41  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 18:24:41  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 18:24:41  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 18:24:41  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 18:24:41  Scan returns (null)
07/16/2008 18:24:41  Parser stopped, processed pkt:0 
07/16/2008 18:24:41  DiSEqc: Vol:8 Loc:HiBand Pos:B Opt:A 
07/16/2008 18:24:41  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 18:24:41  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 18:24:46  Sucessful Changing DVB-S tune request for freq 12456 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 18:24:46  UnmapPID TIF Pin total:4 

07/16/2008 18:24:50  DVB-S tuning not locked.
07/16/2008 18:24:50  Scan returns (null)
07/16/2008 18:24:50  Parser stopped, processed pkt:0 
07/16/2008 18:24:50  DiSEqc: Vol:8 Loc:HiBand Pos:B Opt:A 
07/16/2008 18:24:50  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 18:24:50  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 18:24:55  Sucessful Changing DVB-S tune request for freq 12483 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 18:24:55  UnmapPID TIF Pin total:4 

07/16/2008 18:24:59  DVB-S tuning not locked.
07/16/2008 18:24:59  Scan returns (null)
07/16/2008 18:24:59  End of scan data (2)
07/16/2008 18:24:59  Scan returns DONE
07/16/2008 18:24:59  Scan returns DONE
07/16/2008 18:24:59  Parser stopped, processed pkt:0 
07/16/2008 18:25:11  Channel closed.