07/16/2008 17:13:55  QAM Cache is disabled
07/16/2008 17:13:55  Channel is open (ver 3.0.1)
07/16/2008 17:13:55  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to load scan data for tuner.
07/16/2008 17:13:55  DVB-S Frequency initialize :0
07/16/2008 17:13:55  TSSplitter ver 1.59
07/16/2008 17:13:55  ptsfix is enabled by default.
07/16/2008 17:13:55  'Hauppauge WinTV 88x TS Capture.par' is not exist.

07/16/2008 17:13:55  Set parser delay time 500 on 'Hauppauge WinTV 88x TS Capture'.

07/16/2008 17:14:22  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:14:22  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:14:22  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:14:22  sat_no:0
07/16/2008 17:14:22  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:14:22  lnb:11300-11300-11300 pos:' ' opt:' '
07/16/2008 17:14:22  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:' ' opt:' '.
07/16/2008 17:14:22  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:14:35  Parser stopped, processed pkt:0 
07/16/2008 17:15:04  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:15:04  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:15:04  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:15:04  sat_no:0
07/16/2008 17:15:04  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:15:04  lnb:11300-11300-11300 pos:' ' opt:' '
07/16/2008 17:15:04  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:' ' opt:' '.
07/16/2008 17:15:04  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:15:04  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 17:15:04   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 17:15:04  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 17:15:04  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 17:15:04  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 17:15:04  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 17:15:04  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 17:15:04  Scan returns (null)
07/16/2008 17:15:04  DVB set channel (0) 0--1--1 'Hauppauge WinTV 88x TS Capture-0'. <<=======
07/16/2008 17:15:04  Select output format:1
07/16/2008 17:15:04  Parser stopped, processed pkt:0 
07/16/2008 17:15:04  DVB:Get tuning Entry :(type:1) major:-1  minor:-1  physical:0 (index:-1)
07/16/2008 17:15:04  DVB: DVB-S Tuning Entry not found.
07/16/2008 17:15:04  Invalid tuning for Tuning DVB-S tune '0'.
07/16/2008 17:15:17  DVB-S: Hauppauge tuner  support DVB-S Pilot (Hauppauge WinTV 88x TS Capture-0).
07/16/2008 17:15:17  DVB-S: Hauppauge tuner supports DVB-S DiSEQC (Hauppauge WinTV 88x TS Capture-0, hr:0).
07/16/2008 17:15:17  LNB configuration 'Hauppauge-WinTV-88x-TS-Capture-0.lnb' file found
07/16/2008 17:15:17  sat_no:0
07/16/2008 17:15:17  sat_name:OPTUS D1 (160.0 E)
07/16/2008 17:15:17  lnb:11300-11300-11300 pos:' ' opt:' '
07/16/2008 17:15:17  SEQ LNB: 'OPTUS D1 (160.0 E)' (satno:0) low:11300000 high:11300000 switch:11300000, pos:' ' opt:' '.
07/16/2008 17:15:17  Set DVB-S tuner LNB info (sat_no:0) :11300000 11300000 11300000
07/16/2008 17:15:17  Loading prdefined freq table PredefinedDVBS.frq for DVB-S in 'none-OPTUS D1 (160.0 E)#0'.
07/16/2008 17:15:17   	country region/provider (sat_no):'none' 'OPTUS D1 (160.0 E)' '0'.
07/16/2008 17:15:17  Found 'OPTUS D1 (160.0 E)' frequency section for 'none-OPTUS D1 (160.0 E)' (total:200)
07/16/2008 17:15:17  loaded predined scan freq data 2 entry (2) for none-OPTUS D1 (160.0 E)#0.
07/16/2008 17:15:17  Can't open 'Hauppauge WinTV 88x TS Capture-0-DVB-S.scn' to load scan data for tuner.
07/16/2008 17:15:17  failed to remove 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak' (error:2)
07/16/2008 17:15:17  Backup file 'Hauppauge WinTV 88x TS Capture-0-DVB-S.frq' to 'Hauppauge WinTV 88x TS Capture-0-DVB-S frq.bak'.
07/16/2008 17:15:17  Scan returns (null)
07/16/2008 17:15:17  Parser stopped, processed pkt:0 
07/16/2008 17:15:17  DiSEqc: Vol:8 Loc:HiBand Pos:A Opt:A 
07/16/2008 17:15:17  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 17:15:17  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 17:15:22  Sucessful Changing DVB-S tune request for freq 12456 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 17:15:22  UnmapPID TIF Pin total:4 

07/16/2008 17:15:25  DVB-S tuning not locked.
07/16/2008 17:15:25  Scan returns (null)
07/16/2008 17:15:26  Parser stopped, processed pkt:0 
07/16/2008 17:15:26  DiSEqc: Vol:8 Loc:HiBand Pos:A Opt:A 
07/16/2008 17:15:26  DVB-S: Hauppauge Setup 0 (support:3) for DVB-S hr=0x0 at Hauppauge WinTV 88x TS Capture-0 

07/16/2008 17:15:26  Setup tuner InnerFECRate 0x3 hr=0x0 

07/16/2008 17:15:31  Sucessful Changing DVB-S tune request for freq 12483 symrate:22500 mod:20 fec_in:default fec_in_rate:fec-3/4(0x3) fec_out:default fec_out_rate:default pol:1 roll:0x00 pilot:0x00 hr=0x0.
07/16/2008 17:15:31  UnmapPID TIF Pin total:4 

07/16/2008 17:15:34  DVB-S tuning not locked.
07/16/2008 17:15:34  Scan returns (null)
07/16/2008 17:15:35  End of scan data (2)
07/16/2008 17:15:35  Scan returns DONE
07/16/2008 17:15:35  Scan returns DONE
07/16/2008 17:15:35  Parser stopped, processed pkt:0 
07/16/2008 17:17:09  Channel closed.